Jewelry repair questions · Watches

Can scratches on a watch crystal be polished out, or does it need replacing?

It depends on the crystal over the watch face. Light scratches on acrylic usually polish out at home with a plastic polish. Mineral glass can sometimes lose faint hairlines, but a scratch that catches your fingernail usually means a new crystal. Sapphire rarely scratches and isn't practical to polish. At JewelryRepair.com, a new crystal is $75 for most brands.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$75new crystal for most brands: acrylic, mineral or sapphire, case resealed
9sapphire on the Mohs scale, against about 2 to 3 for acrylic
$30UPS round trip per order, $100 coverage each way
50,000+repairs since 1989

The short version

  • Acrylic (plastic) crystals: usually yes. Light scratches polish out with a mild plastic polish and a soft cloth. A deep gouge or a crack means a new crystal.
  • Mineral glass: rarely. Faint hairlines can sometimes be reduced with a cerium-oxide glass polish, but a scratch that catches your fingernail needs a new crystal.
  • Sapphire: not in practice. It rates 9 on the Mohs hardness scale and is difficult to cut and polish, so a damaged sapphire crystal is replaced, not polished. True scratches on it are rare.
  • The fingernail test is a common rule of thumb: if your nail glides over the mark, it's shallow; if it catches, polishing is unlikely to remove it.
  • At JewelryRepair.com the listed service is Watch Crystal Replacement, not crystal polishing.

Prices

Service PriceWhat's included
Watch Crystal Replacement from $75Your crystal identified (acrylic, mineral or sapphire; flat or domed; with or without a date magnifier), the damaged one pressed out, the seat cleaned of old gasket material and glass dust, a correctly sized crystal fitted with a new tension ring or gasket where the design calls for one, and the case resealed. Same price for all three materials; some brands carry a charge.
Mail-In Evaluation $19Not sure whether it's a scratch, a chip or a coating? The watch is examined under magnification and you get photos and an itemized quote. Credited in full toward the repair.
Watch Cleaning & Detail from $185For a crystal that looks hazy with grime and old polish residue rather than scratched: an exterior clean and detail with the case back left sealed. It is not a scratch repair.
Water-Resistance Pressure Test from $175For a watch you swim with after a new crystal: a documented pressure-chamber test against its stated depth rating; resealing quoted if it fails.

Why the crystal material decides the answer

A watch crystal is the clear cover over the dial, and almost every modern one is acrylic, mineral glass or synthetic sapphire. The Mohs scale ranks materials by whether the harder one scratches the softer one, and the three crystals sit far apart on it: acrylic at about 2 to 3, mineral glass at about 5.5 to 6.5, and sapphire at 9. Among minerals, only moissanite (about 9 to 9.5) and diamond (10) are harder than sapphire.

Compare what a watch meets in an ordinary day:

  • Ordinary steel rates about 4 to 4.5, below glass at about 5.5, so everyday steel contact can mark acrylic but rarely scratches mineral glass and can't scratch sapphire. Harder tool steels and grit are another matter.
  • Sand and grit are mostly quartz, which rates 7: harder than mineral glass, softer than sapphire. That's why a beach day or a gritty pocket can scratch a mineral crystal but not a sapphire one.

So a scratch on acrylic is usually a shallow scuff that can be smoothed away, while one on mineral glass is a groove cut into hard glass. Before you judge any mark, clean the crystal gently so you're looking at the glass and not at grime; see how to clean a watch safely.

Acrylic: how a scratch is polished out

Acrylic (plexiglass) is the one crystal you can reasonably polish yourself. It scratches more easily than glass, but the scratches come out by polishing, and it's the most impact-resistant crystal: it generally won't shatter.

  • Clean first with a soft, slightly damp cloth, so grit isn't ground into the plastic, and put low-tack tape around the bezel to keep polish off the case.
  • Use a polish made for plastic or acrylic. Put a small amount on a soft cloth and work it in small circles over the whole crystal rather than one spot, so a domed crystal keeps its even curve.
  • Wipe, look, repeat. Light scratches usually fade within a few minutes of work. Stop when they're gone or no longer improving.

Know the limits. Every pass removes a little plastic, so a deep gouge can't be chased out without thinning the crystal at that spot, and a crack runs through the crystal: no polish can close it. A cracked or deeply scratched crystal isn't only cosmetic, either, because the crystal is part of the case seal, and a crack lets dust and moisture reach the dial and movement. Skip heat guns and power tools, which can warp the crystal or harm the dial.

Mineral glass and sapphire: why polishing rarely works

Mineral glass is tempered glass. Faint hairlines your fingernail can't feel can sometimes be reduced with a cerium-oxide glass polish, but anything you can catch with a nail needs a new crystal. Polishing glass is slow, and taking glass off unevenly can leave a shallow dip that shows as a wavy patch when you read the dial at an angle. Hardened mineral glass, such as Seiko's Hardlex, resists scratches better than plain mineral glass but is still glass, and the same limits apply.

Sapphire is the most scratch-resistant crystal and also the most difficult to cut and polish. Only materials at least as hard as sapphire, diamond above all, can abrade it, so no home product will touch a mark on it. A sharp knock on an edge can still chip or crack it, and a chipped or cracked sapphire crystal is replaced rather than polished. Many sapphire crystals also carry an anti-reflective coating that gives reflections a faint blue or purple tint, and polishing would take that coating off along with the mark.

Sapphire-coated mineral crystals put a hard sapphire layer over mineral glass. Treat them like sapphire and don't try to polish them at home.

When to replace instead

  • The scratch still catches your fingernail after a careful polish on acrylic, or at all on mineral glass.
  • Polishing an acrylic crystal has started to flatten its dome or leave a hollow you can see at an angle.
  • Any crack, chip or star break, on any material: polish can't close a crack, and the crystal is part of the case seal. Watch crystal replacement cost walks through cracked, chipped and scratched crystals in detail.
  • Fog or droplets underneath. That's water inside, and the scratch is now the least of it: keep the watch dry and choose the fog symptom in Start a Repair for a free diagnosis first; see why a watch fogs up inside.

If the crystal looks hazy rather than scratched, it may be grime and old polish residue; try a gentle clean at home first. Watch Cleaning & Detail (from $185, case back left sealed) deals with a hazy crystal and a dull case together, but it isn't a scratch repair. Marks on the ring around the crystal are on the bezel, and a new crystal won't touch them; see whether a scratched watch case can be polished.

What a new crystal costs at JewelryRepair.com

Prices from the live repair pages, Nov 18, 2026, for Watch Crystal Replacement: the old crystal pressed out, the seat cleaned so no sliver reaches the hands, a correctly sized crystal fitted with a new gasket where the design calls for one, and the case resealed.

  • Most brands: $75, whichever material, or $105 door to door with $30 round-trip shipping.
  • Some brands carry a charge, from $90 for Omega ($75 + $15) to $275 for Rolex ($75 + $200); every brand is listed in how much watch crystal replacement costs.
  • Rush: +$50, and the watch ships back 2 to 3 days sooner.
  • Swim with it? The case is resealed, but only the Water-Resistance Pressure Test ($175 for most brands) documents what it can handle against its stated depth rating.
  • Not sure it needs a new crystal? The Mail-In Evaluation is $19, credited in full toward the repair, or ask for a free quote through the contact page.

Upgrading glass to sapphire is covered in replacing a mineral crystal with sapphire. JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by Seiko, Omega, Rolex or any other watch brand named here, and we don't promise factory parts. If the watch is still under its maker's warranty or a service plan, check with the maker first, because outside service can void it.

Before you ship

  • A cracked crystal can shed slivers onto the dial. Don't press on it or pick at loose pieces, and if a sliver has dropped inside, don't pull the crown or set the time: moving the hands can drag glass across the dial. Ship it as it is.
  • Wrap the watch so it can't shift, use a plain box with nothing on the outside naming the contents, and drop it at any UPS location with the prepaid label from your account.
  • Shipping is $30 round trip per order with $100 of coverage each way; covering a $1,000 watch at full value adds $22.50 (2.5% of the $900 above $100), one fee for both directions. The rest is on shipping and insurance.

The watch is photographed the day it reaches our New York studio and again before it ships back, a bench jeweler fits the crystal and a second jeweler checks it, and the work carries a 1-year workmanship guarantee. Behind JewelryRepair.com is Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.

Questions

Can you polish scratches out of a sapphire crystal?
Not in any practical way. Sapphire rates 9 on the Mohs scale, so only a few harder materials such as diamond can abrade it, and it is difficult to cut and polish. It also rarely scratches in daily wear; when a hard knock chips or cracks it, the fix is a new crystal. At JewelryRepair.com a new sapphire crystal is $75 for most brands, the same as acrylic or mineral glass.
What's the best way to get scratches out of an acrylic watch crystal?
A mild plastic polish on a soft cloth. Clean the crystal, tape off the bezel, and work a small amount of polish in small circles over the whole surface, then wipe and check; light scratches usually fade within a few minutes. Deep gouges can't be chased out without thinning the plastic, and cracks can't be polished at all, so those need a new crystal, $75 for most brands at JewelryRepair.com.
Does a watch glass scratch remover work on mineral or sapphire crystals?
Not on scratches you can feel. Polishes made for plastic suit acrylic, the softest crystal. On mineral glass (about 5.5 to 6.5 on the Mohs scale), only faint hairlines respond to a cerium-oxide glass polish, and sapphire, at 9, is beyond any home product. Not sure which you have? The watchmaker identifies it when the watch arrives.
Can a jeweler polish a scratched watch crystal?
Acrylic can be polished, but at JewelryRepair.com the listed service is replacement, not crystal polishing: Watch Crystal Replacement is $75 for most brands, any material, with the case resealed. For an opinion first, book the $19 Mail-In Evaluation, credited in full toward the repair, or ask for a free quote through the contact page.
Can a scratched watch face be fixed?
Yes. The scratched "watch face" is almost always the crystal over the dial, not the dial itself. Light scratches on acrylic polish out; deep scratches, cracks and chips on mineral glass or sapphire mean a new crystal. At JewelryRepair.com, Watch Crystal Replacement is $75 for most brands, or $105 door to door with $30 round-trip shipping, and the case is resealed. Marks under the crystal, on the dial itself, need a free quote.
How can I tell if my watch crystal is acrylic, mineral or sapphire?
Use a few checks together. Acrylic feels warm against your lip almost at once and gives a dull, plastic sound when tapped; sapphire stays cool, and a drop of water beads up high on it; mineral glass falls in between. Many sapphire crystals show a faint blue or purple reflection from their coating. No single test is conclusive, and never scratch-test a crystal to find out.