Jewelry repair questions · Watches

How do you clean a watch safely at home, and when is a professional cleaning worth it?

Wipe the case and crystal with a soft cloth, and wash a metal or rubber band with mild soap, a soft toothbrush and a thorough rinse, but only get the watch wet if it's water-resistant with the crown closed. Keep leather dry and skip solvents. For grime packed between links, JewelryRepair.com's Watch Cleaning & Detail starts at $185.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$185Watch Cleaning & Detail, most brands; case back stays sealed
$175water-resistance pressure test, if you're unsure of the seals
$30round-trip UPS shipping per order
50,000+repairs since 1989

The short version

  • Case and crystal: wipe with a soft, dry cloth. It is the routine care the makers' own instructions give.
  • Metal or rubber band: mild soap, a soft toothbrush, a thorough rinse to clear the soap, then dry.
  • Leather strap: a dry cloth only, and keep alcohol, cosmetics and water off it.
  • Water only when it's safe: the watch must be water-resistant, its seals sound and the crown pushed in or screwed down. If you're not sure, keep the head dry.
  • Never: solvents such as thinner or nail-polish remover, abrasive polish on brushed steel, or opening the case back.
  • Go professional when grime is packed between the links, the finish has gone dull, or the watch is too valuable to risk. At JewelryRepair.com, Watch Cleaning & Detail starts at $185 and the case back stays sealed.

Prices

Service PriceWhat's included
Watch Cleaning & Detail from $185Bracelet separated from the case; links cleaned ultrasonically, then hand-detailed with brushes and steam; case cleaned around the bezel, lugs and case back; brushed and polished finishes each treated as their own surface. The case back stays sealed and the movement isn't opened. No rush.
Water-Resistance Pressure Test from $175Documented pressure-chamber test against the watch's stated depth rating, so you know whether it can safely be rinsed or worn in water; resealing quoted if it fails.
Watch Battery & Pressure Check from $30For a quartz watch: new battery, the case gasket inspected, cleaned and re-seated, and a pressure check before the back is sealed. New case back gasket +$25.
Watch Overhaul from $195 quartz
from $295 mechanical
When it's the movement that needs cleaning: taken apart, cleaned ultrasonically, re-oiled, regulated and resealed.

Before any water touches it

Most cleaning damage happens because water got somewhere it shouldn't. Check three things first.

  • Is it water-resistant, and are the seals still good? Look for a rating on the dial or case back. Citizen's instructions say not to let moisture onto the case of a watch that isn't water-resistant. Ratings fade with age, too: Omega says gaskets deteriorate with temperature changes, pollution and chemicals and recommends a yearly check, and Seiko notes that opening the case back for a battery can reduce water resistance. If the watch is old, had its battery changed without a pressure check, or you simply don't know, treat it as not water-resistant. What the numbers mean is covered in what watch water-resistance ratings mean.
  • Is the crown closed? Omega's advice: screw a screw-in crown back down after handling it, and push a standard crown fully against the case so moisture can't get in.
  • What is the strap made of? Metal, rubber and polyurethane can be washed. Leather can't.

How to clean each part

  • Case and crystal. Wipe away dirt and sweat with a soft cloth, which is exactly what Citizen's care page says to do. If there is grit on the crystal, brush or blow it off first so you don't drag it across the surface. On a water-resistant watch, a barely damp soft brush reaches around the lugs and bezel.
  • Metal bracelet. Clean it with soap and a soft toothbrush, working between the links and around the clasp, then rinse thoroughly so no soap residue is left, as Citizen advises. Dry it with a cloth and let it air-dry before it goes back in a box. If the head isn't water-resistant, keep the brush only slightly damp and keep the case dry.
  • Rubber or polyurethane strap. The same soap, soft brush and rinse. Citizen notes these straps deteriorate over time from perspiration and dirt, so regular cleaning helps them last.
  • Leather strap. Wipe it with a dry cloth. Citizen warns that perspiration and dirt discolor leather and that volatile substances, bleach and alcohol, including cosmetics, stain it, and it recommends taking a watch off if it gets wet. For more on straps, see how to clean a watch band or strap.
  • After the sea. Omega says to always rinse a watch with tap water after swimming in salt water.
  • Crown and pushers. Citizen suggests turning the crown while it is pressed fully in, and pressing the buttons now and then, so dirt doesn't build up and stick them.

By material: steel, gold, silver, plated, titanium, bronze

  • Stainless steel. Soap and water are all it needs. Keep polishing cloths and metal polish off brushed surfaces: many cases mix brushed flanks with polished bevels, and rubbing blurs the line between them.
  • Solid gold. Clean it the same gentle way. GIA notes that higher-karat gold is softer and more prone to scratches and dents, so skip anything abrasive.
  • Sterling silver. Silver darkens because it reacts with sulfur compounds in the air, forming a tarnish layer. Light tarnish on a solid sterling case or bracelet comes off with a gentle polish such as a silver polishing cloth; see how to use a silver polishing cloth. Many silver-tone watches are steel or plated rather than silver, so check for a 925 or sterling mark first; on plating, the caution below applies.
  • Gold-plated. Be especially gentle. Under the FTC's jewelry guides, gold electroplate needs a minimum of only 0.175 microns of fine gold, about 7 millionths of an inch, so abrasive cloths and polishes can wear through to the metal underneath. A soft cloth is enough.
  • Titanium. GIA describes titanium as highly resistant to corrosion, wear and tarnish, so soap and water is plenty.
  • Bronze. Bronze develops a patina, a thin surface layer formed by slow chemical reaction, and many people find that look appealing. Patina can protect the metal, and on antiques removing it can lower the value, so decide whether you want to keep it before reaching for any metal polish.
  • Rose gold. Clean it like yellow gold. If it looks darker than it used to, see does rose gold tarnish?

What not to do

  • No solvents. Citizen warns that paint thinner, benzene and products containing solvents, including gasoline, nail-polish remover, bathroom cleaners and adhesives, can discolor, dissolve or crack watch materials.
  • Skip the alcohol. It isn't part of the makers' home-care routine, and Citizen names it among the things that stain leather straps. The makers' method is a soft cloth for the case and mild soap for a metal or rubber band.
  • Don't open the case back. It breaks the seal; Seiko says water resistance may deteriorate once the back is reclosed, and advises a water-resistance test at every battery change for watches rated 10 bar or more.
  • Don't soak or run water over a watch you're unsure of, and take a non-water-resistant watch off before washing up.
  • Don't try to clean inside. Fog or water under the crystal means moisture got in; stop wearing it. Through the Start a Repair wizard, fog or water inside a watch gets a free diagnosis first. See why is my watch fogged up inside?

When a professional cleaning is worth it

Home cleaning keeps a watch presentable. It can't reach what builds up over years: skin oil and old polishing residue packed into the gaps between bracelet links, and grime in every crevice of the case. That is the job Watch Cleaning & Detail does at the New York studio of JewelryRepair.com:

  • The bracelet is separated from the case so both can be cleaned properly.
  • The links are cleaned ultrasonically, then hand-detailed with brushes and steam.
  • The case is cleaned around the bezel, lugs and case back the same way, and brushed and polished areas are each treated as their own finish rather than blurred together.
  • The case back stays sealed, so the movement is never opened.
  • The watch is photographed on arrival and before it ships back, and the work carries the 1-year workmanship guarantee.

What it won't do: fix timekeeping (that is a Watch Overhaul, $195 quartz or $295 mechanical with most brands) or prove water resistance (the Water-Resistance Pressure Test, from $175). For scratches, see can a scratched watch case be polished? If the watch is under the maker's warranty or a service plan, check the maker's terms before any outside service, because outside service can void it.

What it costs at JewelryRepair.com

Watch Cleaning & Detail from the live repair page, Nov 18, 2026: $185 for most brands; $200 for Bvlgari, Cartier, Concord, Ebel, Elgin, Gucci, Movado, Omega and Rado ($185 + $15); $205 for Longines ($185 + $20); $285 for Patek Philippe ($185 + $100); $385 for Rolex ($185 + $200). It can't be rushed. Shipping is $30 round trip per order by UPS, with the prepaid label in your account, a plain box with nothing on the outside naming the contents, a signature both ways and $100 of coverage each way. Full value up to $10,000 costs 2.5% of the value above $100, so covering a $4,000 watch is $97.50 (2.5% of $3,900), both directions.

JewelryRepair.com is run by Sky Jewelry, family jewelers on Lenox Avenue since 1989 with over 50,000 repairs since 1989. It is an independent repair service, not affiliated with, authorized by or endorsed by any watch brand.

Questions

Can I clean my watch with isopropyl alcohol?
Not as a routine cleaner: the makers' care instructions don't call for alcohol, and Citizen warns that alcohol, including in cosmetics, stains leather straps. They name a soft cloth for the case and crystal, and mild soap with a soft brush for metal or rubber bands. Citizen also warns that solvents such as thinner or nail-polish remover can discolor, dissolve or crack watch materials, so keep them off the watch entirely.
How do I clean a stainless steel watch bracelet?
Use a drop of mild soap and a soft toothbrush, working between the links and around the clasp, then rinse thoroughly and dry with a soft cloth. Only rinse if the head is water-resistant and the crown is closed; otherwise keep the case dry. For buildup a brush can't reach, JewelryRepair.com's Watch Cleaning & Detail separates the bracelet and cleans the links ultrasonically, from $185.
How much does professional watch cleaning cost?
$185 for most brands at JewelryRepair.com, for Watch Cleaning & Detail with the case back left sealed. Brands with a surcharge cost more: $200 for Omega or Cartier, $205 for Longines, $285 for Patek Philippe and $385 for Rolex. Round-trip UPS shipping is $30 per order, and the price includes the 1-year workmanship guarantee and photos on arrival and before return.
How do I clean the glass on my watch?
Wipe it with a soft, dry cloth after brushing or blowing off any grit, so nothing gets dragged across the surface. That clears fingerprints and smears on the outside. Fog or droplets under the glass are a different problem: moisture is inside the case, so stop wearing it. Through the Start a Repair wizard at JewelryRepair.com, fog inside a watch gets a free diagnosis first.
Will cleaning my watch void the warranty?
Washing the outside yourself doesn't open the watch, but check your maker's terms before handing it to any outside service. JewelryRepair.com's Watch Cleaning & Detail keeps the case back sealed, so the movement isn't opened. Even so, if the watch is under the maker's warranty or a service plan, check with the maker first, because outside service can void it. JewelryRepair.com is independent of every watch brand.
Can I rinse my watch under the tap?
Only if it's water-resistant, its seals are sound and the crown is pushed in or screwed down. Omega even advises rinsing with tap water after swimming in salt water. If the battery was changed without a pressure check, or you don't know when the seals were last tested, keep it dry. The Water-Resistance Pressure Test at JewelryRepair.com is $175 for most brands.