Watches

Watch water resistance

Steel bracelet watch held in a water-resistance pressure tester

Water resistance is a watch's ability to keep water out of its case, stated as a test pressure in bar, atmospheres (ATM) or meters. The rating comes from a static pressure test on new watches, not a promise the watch can dive that deep, and the protection fades as the gaskets sealing the crown, case back and crystal age.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

How water-resistance ratings work

A water-resistance rating is a test pressure, not a diving depth. It's written in bar, atmospheres (ATM) or meters, and they're used interchangeably: 1 bar is roughly 1 atmosphere, and each is quoted as about 10 meters, so 5 bar, 5 ATM and 50 m describe the same rating. The number is set by testing a sample of new watches once, under static pressure, so it isn't a depth you can safely take your particular watch to. A watch marked 30 m isn't expected to handle swimming at all.

The international standard behind the mark is ISO 22810:2010, which replaced ISO 2281, introduced in 1990. ISO 2281's tests included holding the watch under 10 cm of water while a force of 5 N pressed on the crown and pushers for 10 minutes, and a condensation test: the watch is warmed to 40 to 45°C, a drop of cooler water goes on the crystal, and any fog that forms inside means it failed.

What each rating means

  • No marking: in Citizen's chart, a watch with no water-resistance marking isn't designed for any moisture.
  • Water resistant, or 3 bar / 30 m: everyday wear, rain and accidental splashes. Not for showering, bathing or swimming.
  • 5 bar / 50 m: swimming. Citizen's chart, for example, allows swimming at 5 bar but not skin diving.
  • 10 bar / 100 m: swimming, snorkeling and water sports, and in Citizen's chart skin diving, but not scuba.
  • 20 bar / 200 m: demanding surface water sports and skin diving, but still not scuba unless it's a diver's watch.
  • "Diver's" plus a depth: a dive watch tested to ISO 6425, which requires at least 100 m and tests each watch at 125% of its rating, so a 200 m diver's watch is tested at the equivalent of 250 m. These are the watches built for scuba.

Makers' charts differ in the details, so your watch's manual is the final word.

How water resistance is lost

A watch case is sealed by gaskets at the case back, the crystal, the crown and any pushers. Depth is only one factor: a gasket that has dried out, an old knock to the case or a big swing in temperature can let water in below the rated pressure. The common ways a watch loses its seal:

  • Aging gaskets. Gaskets dry out with age, so a rating that held when the watch was new may not hold today.
  • A battery change that wasn't resealed. Opening the case back can weaken the original seal when it's closed again. Seiko's battery instructions ask for a water-resistance test at battery replacement, and every time on watches rated 10 bar or more.
  • The crown left out or unscrewed. A screw-down crown only seals when it's screwed fully home.
  • Pushers pressed under water. Omega, for one, tells owners to avoid operating chronograph pushers under water, except on models built for it.
  • Heat and temperature swings. Omega gives an optimum operating range of 0 to 60°C (32 to 140°F) and advises avoiding wide temperature variations.
  • Knocks and cracks. A chipped crystal or a dented case can open a path the gaskets can't close.

Fog or droplets under the crystal mean water has already got past a seal. Stop wearing the watch and don't open it at home: through the Start a Repair wizard, fog or water inside a watch gets a free diagnosis first, and you approve any work. After swimming in the sea, rinse the watch in fresh tap water.

Water resistant vs waterproof

Watches aren't sold as waterproof: under ISO 2281 the word can't be used on a watch, and many countries apply that rule. "Water resistant" is the accurate description. The case resists water up to its tested pressure, under the conditions of the test, while its seals are in good condition.

That last condition is the one owners forget. The rating printed on the dial or case back describes the watch as it left the factory. It says nothing about gaskets that have aged for years, or a case back that was opened for a battery and closed without a check. Treat the rating as a claim to verify, not a permanent fact.

Testing, and what it costs here

Omega recommends having water resistance checked once a year, and any watch that goes in the water is worth testing after a battery change or a knock to the crystal or crown. The watch pressure test entry covers when to test and how the chamber test works.

The Water-Resistance Pressure Test is $175 for most brands, with a documented result and resealing quoted before any work if the watch fails; some brands add $15 to $200, shown on the repair page. It's a different service from the pressure check in the $30 Watch Battery & Pressure Check, which offers a new case back gasket for $25. A crown that pulls out, spins or is missing is Stem & Crown Replacement (from $75), with a fresh gasket where the design calls for one; a screw-down crown that won't tighten or seal starts with the $19 Mail-In Evaluation. A cracked crystal is Watch Crystal Replacement (from $75).

If the watch is still under the maker's warranty or a service plan, check with the maker first, because outside service can void it. JewelryRepair.com is independent, not affiliated with, authorized by or endorsed by any watch brand. Shipping is $30 round trip by UPS. Sky Jewelry, family jewelers on Lenox Avenue since 1989, has completed over 50,000 repairs since 1989.

What it costs here

Service Price What's included
Water-Resistance Pressure Test $175 most brands The watch goes into a pressure chamber and is tested against its own stated depth rating, with the crown, case back and crystal seals checked under pressure. You get a documented result; resealing is quoted if it fails. Some brands add $15 to $200. No rush option.
Watch Battery & Pressure Check from $30 most brands A new battery, gasket inspection and a pressure check before the case goes back; a new case back gasket is a +$25 option. Not the same as the documented pressure test.
Stem & Crown Replacement from $75 For a crown that pulls out, spins or is missing, which leaves an open path for water: a new stem and/or crown with a fresh gasket where the design calls for one.
Watch Crystal Replacement from $75 For a cracked or chipped crystal that can let moisture reach the dial: the crystal is replaced and the case resealed.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

What does 5 ATM water resistance mean?
It means watches of that model passed a static pressure test equal to about 50 meters of water when new, and it's generally fine for swimming but not for diving. Citizen's chart, for example, allows swimming at 5 bar but not skin diving. The rating assumes healthy seals; if yours hasn't been tested in years, a Water-Resistance Pressure Test at JewelryRepair.com, $175 for most brands, shows what it can still handle.
What does 10 ATM water resistance mean?
It means watches of that model passed a static pressure test equal to about 100 meters of water when new, the same rating as 10 bar or 100 m. It covers swimming and snorkeling, and Citizen's chart also allows skin diving at 10 bar, but not scuba, which calls for a diver's watch. Seiko asks for a water-resistance test at every battery change on watches rated 10 bar or more; at JewelryRepair.com the Water-Resistance Pressure Test is $175 for most brands.
Can I swim with a 30m (3 ATM) water-resistant watch?
No. A 30 m or 3 bar rating covers rain and accidental splashes, not swimming, bathing or showering. The number is a static test pressure on new watches, not a depth the watch can safely reach. For swimming, look for 5 bar (50 m) or more, and keep the seals in good condition: at JewelryRepair.com the Water-Resistance Pressure Test is $175 for most brands.
What's the difference between water resistant and waterproof?
Water resistant is the accurate term; waterproof isn't used on watches. ISO 2281, the standard since replaced by ISO 22810:2010, barred the word waterproof from watches, a rule many countries follow. A water-resistant watch resists water up to its tested pressure while its seals are in good condition, which is why the rating needs checking as a watch ages.
There's fog inside my watch. What should I do?
Stop wearing it and don't open it yourself. Fog under the crystal means moisture got past a seal, and the longer it stays, the more it can reach the dial and movement. At JewelryRepair.com, fog or water inside a watch gets a free diagnosis first through the Start a Repair wizard, and you approve any work. Shipping is $30 round trip by UPS.

All glossary terms · Repair questions · How online jewelry repair works

Sources