Watches
Watch crown
A watch crown is the small knob on the side of a watch case that sets the time and date and, on a mechanical watch, winds the mainspring. It sits on a thin rod called the stem, which runs through the case into the movement, and gaskets around it help keep water and dust out.
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
What the crown does
The crown is the part of a watch you turn and pull. On most watches it has two or three positions:
- Pushed in. On a hand-wound or automatic mechanical watch, turning it winds the mainspring. On most quartz watches, turning it here does nothing.
- First click out. On many modern watches with a date, this is where the date is set.
- Fully out. Turning it moves the hands to set the time. Many watches have a hacking feature that stops the seconds hand while you set it, so you can set the time to the second.
A screw-down crown adds a step: unscrewing it releases it into the winding position, and from there it pulls out to set the date and time. The crown almost always sits on the right of the case, so it can be reached with the watch on the left wrist; "destro" models put it on the left. Before crowns, watches were wound with a separate key; in Britain, Thomas Prest patented winding through the pendant in 1820.
Push-pull vs screw-down crowns
A push-pull crown simply slides in and out, and gaskets around the stem and inside the crown do the sealing. A screw-down crown threads onto a tube in the case and squeezes its gasket tight when it is screwed home, which is why it is common on dive and sports watches. WatchesbySJX's explainer on keyless works notes that on some screw-down designs the crown disengages from the working part of the stem as it is pushed and screwed in, so tightening it can't keep winding a mainspring that is already full.
Because the crown, along with any chronograph pushers, is an opening you work by hand, water-resistance standards test it directly. Under ISO 2281, introduced in 1990 and since replaced by ISO 22810:2010, one test presses on the crown and pushers with a force of 5 N while the watch sits under 10 cm of water for 10 minutes. Seals age: how well a watch survives water depends not only on depth but on the age of its sealing material and any past damage.
How a crown wears or fails
WatchesbySJX notes that tugging too hard at the crown, or cycling through its positions too often, wears the small steel parts behind it. Common failures:
- The crown comes off or is missing. Usually the stem has snapped or the crown has worked loose from it. The empty stem hole lets dust and moisture into the movement, so stop wearing the watch; see what to do when a crown comes off.
- It spins but doesn't set the time or wind. The stem has broken inside the case or no longer engages the setting parts.
- It's stuck, stiff, wobbly or won't push back in. Possible causes include a stem bent by a knock, dirt or old lubricant in the setting parts, or, on a screw-down crown, worn or damaged threads on the crown or the case tube, which can also stop it catching or let it work loose. Keep it out of water until it's checked. A broken or bent stem or crown is Stem & Crown Replacement ($75, most brands); thread or tube damage, or a cause you can't pin down, starts with the $19 Mail-In Evaluation, credited in full. More in why a watch crown gets stuck or stiff.
- Fog or droplets under the crystal after hand-washing, a shower or a swim. A crown left unscrewed or a dried-out crown gasket can let water in. Stop wearing it: fog or water inside a watch gets a free diagnosis first through the Start a Repair wizard, and you approve any work.
Habits that help: never pull or turn the crown under water, screw a screw-down crown fully home before the watch gets wet, and don't force a crown that resists. If a quartz watch has stopped, check that the crown is pushed fully in before booking the Watch Battery & Pressure Check ($30, most brands).
Watch crown vs watch stem
People use the two words for the same thing, but they are two parts. The crown is the knob outside the case, and it carries the gasket that seals the opening; the stem is the steel rod behind it that runs into the movement. On most watches the crown threads onto the stem, which is why the two are replaced together.
What it costs here
Stem & Crown Replacement is $75 for most brands; TAG Heuer adds $120 ($195) and Rolex $200 ($275). It covers a crown matched to your case in size, thread and style, a new stem cut to length, a fresh gasket where the design calls for one, and tested winding, setting and date. The booking page asks whether you still have the crown and stem; your answer doesn't change the price. It can't be rushed, and we don't promise factory parts.
If the watch goes in water, a Water-Resistance Pressure Test, $175 for most brands, checks the crown, case back and crystal seals against its stated depth rating. Damaged case-tube threads, or anything else that isn't a single catalog repair, start with the Mail-In Evaluation: $19, credited in full toward the repair.
If your watch is still under the maker's warranty or a service plan, check with the maker first, because outside service can void it. JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by any watch brand. Sky Jewelry, family jewelers on Lenox Avenue since 1989, has done over 50,000 repairs since 1989. Shipping is $30 round trip per order.
Prices at a glance
| Service | Price | What's included |
|---|---|---|
| Stem & Crown Replacement | $75 most brands $195 TAG Heuer $275 Rolex |
A new stem cut and filed to the length your case requires, a crown matched to the case in size, thread and style, a fresh gasket where the design calls for one, and winding, setting and the date tested. No rush option. |
| Water-Resistance Pressure Test | $175 most brands | A documented pressure-chamber test against the watch's stated depth rating, with the crown, case back and crystal seals checked under pressure. Resealing is quoted if it fails. |
| Watch Battery & Pressure Check | from $30 most brands | For a quartz watch that has stopped with the crown pushed fully in: a new battery, gasket inspection and pressure check. |
| Mail-In Evaluation | $19 | For a crown that's stuck, a screw-down crown that won't catch its thread, a damaged case tube or anything you can't name: examined under magnification, itemized quote with photos, credited in full toward approved work. |
Prices come from the live repair pages. Shipping is $30 round trip per order.
Related questions
Questions
What is the crown on a watch for?
Can a Rolex or screw-down crown be replaced?
What is a screw-down crown?
Why is the crown on the right side of a watch?
Can a damaged watch crown let water in?
Why does my watch stop when I pull the crown out?
See also
All glossary terms · Repair questions · How online jewelry repair works