Watches

Watch pressure test

Steel bracelet watch held in a water-resistance pressure tester

A watch pressure test checks whether a watch case is still sealed well enough to meet its water-resistance rating. The watch goes into a pressure chamber and is tested against its stated depth, which shows whether the gaskets at the crown, case back and crystal are holding or where water could get in.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

What a pressure test is

A pressure test, also called a water-resistance test, checks the seals on a watch case. Water gets into a watch through its openings: the crown and any pushers, the case back and the crystal, each sealed with a gasket. A test raises the pressure around the watch to its rated level and looks for any sign the case is letting it in.

At JewelryRepair.com the test runs in a pressure chamber against the depth rating printed on the dial or case back, not an arbitrary figure, and the watchmaker watches the crown, case back and crystal for any sign that a gasket is giving way. You get a documented result: confirmation that the watch holds its rating, or a note of where it failed and what resealing would involve, quoted for your approval before any work.

How water-resistance testing works

Ratings are written in bar, atmospheres or meters, and 1 bar is roughly the pressure of 10 meters of water, so 10 bar and 100 m describe the same rating. They are lab ratings for a watch at rest, not a promise that it can dive to that depth.

Standards spell out what a water-resistant watch must survive. The ISO 2281 tests, since replaced by ISO 22810:2010, included:

  • An hour under 10 cm of water.
  • A force of 5 N pressed on the crown and pushers under 10 cm of water for 10 minutes.
  • A condensation test: the watch is warmed to 40–45 °C and a drop of water at 18–25 °C is placed on the crystal; any fog inside is a failure.
  • Water at the rated pressure for 10 minutes, and air at 2 bar.

Diver's watches have their own standard, ISO 6425, under which every single watch is tested rather than a sample: 125% of the rated pressure for 2 hours, a margin meant to cover pressure spikes from movement, denser seawater and seals that degrade.

Why a watch needs testing again

Water resistance isn't permanent. Gaskets dry out with age, and every time a case is opened the seal has to be remade. How well a watch keeps water out depends on the age of its seals, past damage, temperature and mechanical stress, and most makers recommend pressure-testing a diving watch annually or every two to three years, with seals replaced as needed. A Seiko instruction manual says a watch's original water resistance may deteriorate once the case back has been opened and closed again, advises asking for a water-resistance test when the battery is replaced, and says it must be done at every battery change on watches rated 10 bar or more.

When to get a pressure test

  • Before swimming season or a beach trip, if the watch goes in the water with you.
  • After a battery change somewhere else, since opening the case back means the seal had to be remade.
  • After buying a pre-owned or vintage watch whose service history you don't know.
  • After a hard knock to the crystal or crown, or after a crystal or crown has been replaced.
  • On the maker's schedule for a dive watch.

A screw-down crown that won't seat or keeps working loose needs the crown, stem or case tube looked at before any test: Stem & Crown Replacement ($75 for most brands) if it's the crown or stem, or the $19 Mail-In Evaluation if you can't tell. If you already see fog or droplets under the crystal, a seal has failed. Stop wearing the watch and book it through Start a Repair, where fog or water inside gets a free diagnosis first; you approve any work.

Pressure test vs water-resistance rating

The two get mixed up because the test is named after the rating. Water resistance is a specification: what the case was designed and tested to handle when it was new. A pressure test is a measurement of your watch today, with its current gaskets. A watch marked 100 m that hasn't been resealed in years may no longer meet that number, and only a test shows whether it does.

It also differs from the pressure check in our $30 Watch Battery & Pressure Check. That check is part of a battery change: the gaskets are inspected and the case is checked before it ships. The Water-Resistance Pressure Test is a standalone, documented test against the watch's stated depth rating.

What it costs here

For most brands, the Water-Resistance Pressure Test costs $175. Bvlgari, Cartier, Concord, Ebel, Elgin, Gucci, Movado, Omega and Rado are $190, Longines $195, Patek Philippe $275 and Rolex $375 (prices from the live repair page, Nov 18, 2026). It can't be rushed. If the watch fails, resealing is quoted for your approval before any work; if the movement has already taken on water, it may need a Watch Overhaul, $195 for quartz or $295 for mechanical on most brands.

A watch still covered by its maker's warranty or service plan should go to the maker first, because outside service can void that cover. JewelryRepair.com works independently of the watch brands: it has no affiliation with any of them and isn't authorized or endorsed by any. The $30 UPS round trip includes $100 of coverage each way, and a valuable watch can be insured for its full value (shipping and insurance). Intake and outgoing photos are taken at the New York studio, a second jeweler reviews the result, and the work carries the 1-year workmanship guarantee. The test is done by Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.

Prices at a glance

Service Price What's included
Water-Resistance Pressure Test $175 most brands
$190 Omega
$195 Longines
$275 Patek Philippe
$375 Rolex
A pressure-chamber test against the watch's stated depth rating, with the crown, case back and crystal seals checked under pressure, and a documented result. If it fails, you get a note of where and what resealing would involve, quoted for your approval before any work. No rush option.
Watch Battery & Pressure Check from $30 most brands For a quartz watch: a new battery, gasket inspection and a pressure check before it ships; a new case back gasket is +$25. This check is part of the battery service, not the documented test above.
Watch Overhaul from $295 mechanical
from $195 quartz
If water has reached the movement: full movement service with disassembly, cleaning, lubrication, regulation and reseal. Cannot be rushed.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

What is a watch pressure test?
It's a check that a watch case is still sealed well enough to meet its water-resistance rating. The watch is tested in a pressure chamber against its stated depth, and the crown, case back and crystal gaskets are checked for leaks. At JewelryRepair.com the test is $175 for most brands, with a documented result and any resealing quoted before work.
How much does a watch pressure test cost?
At JewelryRepair.com, the Water-Resistance Pressure Test is $175 for most brands, $190 for brands such as Omega, Cartier and Movado, $195 for Longines, $275 for Patek Philippe and $375 for Rolex. You get a documented result, and if the watch fails, resealing is quoted for your approval before any work. Round-trip UPS shipping is $30 per order.
How often should a watch be pressure tested?
If it goes in the water, regularly: most makers recommend testing a diving watch every year or every two to three years, with the seals replaced as needed. A Seiko instruction manual advises asking for a water-resistance test when the battery is replaced, and says it must be done at every battery change on watches rated 10 bar or more. A watch that never gets wet needs it less often, but its gaskets still age.
Is a pressure test the same as the check in a battery change?
No. The pressure check in our $30 Watch Battery & Pressure Check is part of the battery service: after the new battery goes in, the gaskets are inspected and the case is checked before it ships. The Water-Resistance Pressure Test, $175 for most brands at JewelryRepair.com, is a standalone pressure-chamber test against the watch's stated depth rating, with a documented result and any resealing quoted before work.
Can a watch pass a pressure test and still leak later?
Yes. A test shows the seals are holding on the day it's done; it can't stop gaskets from aging or a crown being left open. Ratings are also measured on a watch at rest, so treat them as a margin rather than a dive limit. Keep the crown pushed in or screwed down near water, and retest after the case has been opened or knocked.
What happens if my watch fails the pressure test?
You get a note of where it failed and what resealing would involve, quoted for your approval before any work, and nothing beyond what you approve is charged. If you decline, the watch ships back with nothing more to pay, because the $30 round-trip shipping already covers the return. If water has reached the movement, an overhaul may be needed, from $195 for quartz.

All glossary terms · Repair questions · How online jewelry repair works

Sources