Watches
Watch battery
A watch battery is the small button cell that powers a quartz watch. Many quartz watches run on a 1.55-volt silver-oxide cell, coded SR on the pack (an SR626SW, for example), while others take a 3-volt lithium coin cell coded CR. The two aren't interchangeable, and a fresh cell typically runs a watch for a few years.
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
What a watch battery is and how to read its code
A quartz watch runs on a tiny button cell. The code printed on it follows the IEC 60086 naming system, and it tells you more than a part number does:
- First letter, the chemistry. S is silver oxide at 1.55 volts, C is lithium manganese dioxide at 3 volts, and L is alkaline at 1.5 volts. These three are the types most used in quartz watches.
- R means round.
- The digits are the size. The first one or two give the diameter in whole millimeters, rounded down, and the last two give the height in tenths of a millimeter: an SR516 is 5.8 mm across and 1.6 mm tall, and a CR2032 is 20 mm by 3.2 mm.
- The suffix is the drain. SW marks a low-drain cell for quartz watches without a light, alarm or chronograph; W marks a high-drain cell.
So an SR626SW, sold as the 377, is a low-drain silver-oxide cell 6.8 mm across and 2.6 mm tall; its high-drain sibling, the SR626W, is sold as the 376. Our SR626SW entry covers its other names. Many silver-oxide cells hold their voltage nearly flat and then fall off quickly near the end, though this varies by cell, which is one reason a watch can run perfectly one day and stop the next.
Signs your watch needs a new battery
- It has stopped, or it stops and starts. That's the most common sign, and the cheapest fix to try first.
- A low-battery warning. Some quartz watches show a warning when the cell is nearly spent. Seiko's instructions for one caliber with a light, alarm and stopwatch say the watch may stop within 2 to 3 days once its battery warning lights up; check your own model's manual.
- It's been a few years. Seiko rates that caliber at about 3 years per battery, assuming the light for 2 seconds, the alarm for 20 seconds and the stopwatch for 1 hour each day, and notes that the cell fitted at the factory is a monitor battery that may run out sooner.
- The second hand jumps in 2-second steps. On a light-powered watch, Citizen's support pages describe this as an insufficient-charge warning, and the fix is light, not a battery: put the dial in direct sunlight before you book anything. On a battery-powered watch, check your model's manual for what the step means; our answer on a second hand skipping seconds goes through the causes.
Why it matters for repairs
Three things go wrong around a battery, and none of them is the battery itself.
- Leaks. Seiko's instructions warn that leaving an exhausted battery in a watch for a long time can cause malfunction through leakage, and say to replace it as soon as possible. A stopped watch in a drawer is the one to deal with first.
- Seals. Opening the case back can weaken the original water resistance, so Seiko recommends a water resistance test after a battery change and says to be sure of one on watches rated 10 bar or more. Our battery service inspects the gaskets and pressure-checks the case before it ships, and a new case back gasket is a +$25 option. For a watch rated 10 bar or more, or one you swim with, add the documented Water-Resistance Pressure Test ($175, most brands), which is separate from the check included in the battery service.
- The wrong cell. A cell can fit the compartment and still be wrong: a different chemistry may run down early or make the watch behave erratically, and a 3-volt CR cell in a movement built for 1.55 volts risks lasting damage.
Silver-oxide (SR) vs lithium coin (CR) cells
The battery people most often confuse a watch cell with is the lithium coin cell, the CR type sold for all kinds of small electronics. Both are round button cells, and some watches do run on CR cells, but they are different chemistries at different voltages: a silver-oxide SR cell is 1.55 volts and a lithium CR cell is 3 volts. A watch is built for one or the other, so the replacement has to match the original's code, not just its diameter. Our battery service fits silver-oxide cells; if your watch takes a CR cell, ask through the on-site chat or the contact form before booking, and a jeweler replies within 1 business day.
Solar watches are a third case. They charge from light, and Citizen's FAQ says exposing the dial to direct sunlight charges a stopped one, so try that first. If a solar watch's own battery needs replacing, that's the +$85 solar battery option on our battery service.
What it costs here
The price of our Watch Battery & Pressure Check is built from three things, all shown on the repair page before you pay:
- The brand. $30 covers most brands. Bvlgari, Cartier, Concord, Ebel, Gucci, Movado, Omega and Rado add $15 ($45), Longines adds $20 ($50), Patek Philippe adds $100 ($130) and Rolex adds $200 ($230).
- The cells. A watch that takes two batteries is +$30, and a solar watch's battery +$85.
- The seal. Gaskets are inspected on every job; a new case back gasket is +$25.
Rush (+$50) ships it back 2 to 3 days sooner. UPS shipping is $30 round trip per order however many watches share the box, and you can enter the make and model on the repair page when you book. To see how mail-in pricing compares with other ways to get a battery changed, read our guide to watch battery replacement cost.
If a fresh battery doesn't restart the watch, the movement is usually the problem. A movement that needs cleaning and lubrication is a quartz Watch Overhaul, $195 for most brands. Leak damage may need parts, so it's diagnosed before any price is set: the Start a Repair wizard sends a stopped watch to a free diagnosis, or you can book the $19 Mail-In Evaluation, credited in full, and you approve any work.
A watch still under the maker's warranty or a service plan should go to the maker first, since outside service can void that coverage. JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by any watch brand. Each watch is photographed on arrival and before it goes back in a plain box, serviced at Sky Jewelry's New York studio and checked by a second jeweler, under a 1-year workmanship guarantee. Sky Jewelry has been family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.
Prices at a glance
| Service | Price | What's included |
|---|---|---|
| Watch Battery & Pressure Check | from $30 most brands from $45 Omega from $50 Longines from $130 Patek Philippe from $230 Rolex |
Case back opened with the right tool for a screw-down or snap back, a fresh silver-oxide cell of the exact size the caliber specifies, gaskets inspected and the case pressure-checked. Quartz watches only. Dual battery +$30, solar battery +$85, new case back gasket +$25. |
| Watch Overhaul | $195 quartz | For a quartz movement that needs cleaning and lubrication: taken apart, cleaned, lubricated, regulated and resealed. Worn parts are flagged before anything proceeds, and a stopped watch gets a free diagnosis first. Cannot be rushed. |
| Water-Resistance Pressure Test | from $175 | A documented pressure-chamber test against the watch's stated depth rating, separate from the pressure check in the battery service. Resealing is quoted if it fails. |
Prices come from the live repair pages. Shipping is $30 round trip per order.
Related questions
Questions
How much does it cost to replace a watch battery by mail?
How long does a watch battery last?
Is it bad to leave a dead battery in a watch?
Can I replace my watch battery myself?
Why won't my watch work after a new battery?
What battery does my watch take?
See also
All glossary terms · Repair questions · How online jewelry repair works