Jewelry repair questions · Watches
How much does it cost to replace a watch crystal (the glass)?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- $75 for most brands, and the material doesn't change it: acrylic, mineral glass and sapphire are booked at the same listed price.
- Brand charges apply to a few makes: $90 for Omega, Cartier and five others, $95 for Longines, $155 for TAG Heuer, $175 for Patek Philippe and $275 for Rolex.
- You don't need to know your crystal type. The watchmaker identifies it when the watch arrives.
- A crack is a seal problem, not just a looks problem. Stop wearing the watch and keep it dry until it's fixed.
- Scratched, not cracked? Light scratches on acrylic can often be polished out at home; see whether a scratched crystal can be polished.
Prices
| Service | Price | What's included |
|---|---|---|
| Watch Crystal Replacement | from $75 | Crystal identified and matched to the case, the old one removed, the seat cleaned, a new crystal fitted with a fresh gasket or tension ring where used, and the case resealed. |
| Rush Service | $50 | Moves the crystal job to the front of the bench queue so it ships back 2 to 3 days sooner. |
| Water-Resistance Pressure Test | from $175 | For a watch you swim with: a documented pressure-chamber test against its stated depth rating; resealing quoted if it fails. |
| Mail-In Evaluation | $19 | For pocket watches, unusual vintage cases and a mineral-to-sapphire upgrade: examined under magnification, photographed and quoted. Credited in full. |
Crystal replacement prices by brand
From the live Watch Crystal Replacement page, Nov 18, 2026. The brand charge is added in the configurator, so the total you see before checkout is the whole repair price:
- Most brands: $75. That includes Seiko, Citizen, Fossil, Timex, Bulova and every brand not listed below, and also Ebel and Elgin, which carry charges on other services but not on crystals.
- Bvlgari, Cartier, Concord, Gucci, Movado, Omega and Rado: $90 ($75 + $15).
- Longines: $95 ($75 + $20).
- TAG Heuer: $155 ($75 + $80).
- Patek Philippe: $175 ($75 + $100).
- Rolex: $275 ($75 + $200).
- Rush: +$50 on any of these, so $125 for most brands, and the watch ships back 2 to 3 days sooner.
Those are prices for genuine watches. A watch that can't be verified as genuine is booked under its own line in the brand menu: $100 for a basic build ($75 + $25) or $175 for a high-grade build ($75 + $100).
JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by any watch brand named here, and nothing on this page promises factory parts. If the watch is still under its maker's warranty or a service plan, check with the maker first, because outside service can void it. Every brand's full price list is on its own page under watch repair by brand.
Why crystal prices vary so much elsewhere
Shop to shop, a crystal quote can range widely, and four things usually explain it:
- Material. Acrylic, a plastic, is the cheapest to make and turns up on vintage and many inexpensive watches. Mineral crystal is hardened glass, common on everyday quartz watches. Synthetic sapphire resists scratches best, but it is hard to cut and finish, so it costs the most to produce.
- Shape. A flat disc is the simplest part. A domed crystal, one with a date magnifier, or an unusual shaped or faceted case needs a crystal made for that profile.
- How it's held. Many crystals are pressed into the case with a gasket or a tension ring; on some designs the bezel or the case has to be opened first. Either way, the seal has to be rebuilt.
- The brand. Prices for some brands run higher at many shops. Here, 11 brands carry a crystal charge, listed above; every other genuine brand is $75.
At JewelryRepair.com, material doesn't change the price: a sapphire crystal costs the same $75 as acrylic for most brands. Whatever you're quoted, ask whether it includes a new gasket or tension ring where the case uses one, and a reseal: that seal is what keeps moisture away from the dial.
How a crystal is replaced at the bench
Nothing is ordered until the watchmaker knows what the watch has now: the material, the diameter and thickness, whether the crystal is flat or domed, and whether it carries a date magnifier. A domed crystal or one with a magnifier has to follow the original's height and profile, and a magnifier has to sit over the date window, or the replacement won't seat properly in the bezel. Then the case or bezel is opened and the broken crystal comes out.
The step that decides how the job holds up is cleaning the seat the crystal sits in. A grain of glass left there can later drop onto the dial and catch a hand, and old gasket residue stops the new seal from bedding down evenly. The new crystal goes in with a fresh gasket or tension ring where the case uses one, and the case is closed so that ring is compressed evenly all the way round; that even pressure is what keeps moisture away from the dial.
Every watch is photographed the day it arrives at the New York studio and again before it ships back, so you can compare the two sets in your account. A bench jeweler does the work and a second jeweler checks it. The price includes a clean and polish, and the work carries a 1-year workmanship guarantee from the day the watch is delivered back to you. JewelryRepair.com is the mail-in service of Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.
Cracked, chipped or scratched: which needs a new crystal?
A crack or chip in any crystal means a new one: the crystal is part of the case seal. Sapphire is very scratch-resistant but more brittle than glass, so a sharp knock on an edge can chip or crack it, and a chipped sapphire is replaced, not polished. Scratches alone are a different question, covered in can a scratched watch crystal be polished? To work out which material you have, see replacing a mineral crystal with sapphire; you don't need the answer to book.
What a fair crystal quote should include
Two quotes for "a new crystal" can describe different jobs. Before you compare prices anywhere, check what the number covers:
- The right part for your case. Matched in diameter, thickness and profile, including the dome or date magnifier if the original had one, not the nearest flat disc.
- A new gasket or tension ring where the case uses one. An old, compressed ring is a common reason a resealed watch lets moisture in later.
- The reseal itself, and whether a pressure test is included or extra. At JewelryRepair.com the reseal is part of the $75, and the documented pressure test is a separate $175 for most brands.
- A clean of the dial side. Glass from a cracked crystal often ends up inside the case; the quote should cover removing it.
If your crystal just cracked, and special cases
- Take it off and keep it dry. The crystal is part of the case seal, so a crack lets dust and moisture reach the dial and movement.
- Don't press on the crystal or pick at loose pieces. A spreading crack can drop glass onto the hands. If you can see a sliver under the crystal, leave the crown alone and ship the watch as it is.
- Fog or droplets inside mean water has already got in, and a crystal may not be the whole job. Choose the fog symptom in Start a Repair for a free diagnosis first, and you approve any added work, such as a reseal or an overhaul, before it's done. See why a watch fogs up inside.
- Bezel damage is different. A scratched or faded ring with numbers around the crystal is the bezel or its insert, and a new crystal won't touch it.
- Pocket watches and unusual vintage cases: book the Mail-In Evaluation ($19, credited in full) or ask for a free quote through the contact page first, so you have the price and the plan in writing before any work. More in can a pocket watch be repaired?
- Swapping mineral glass for sapphire: it depends on the case seat and the crystal size, so it's quoted, not assumed. See replacing a mineral crystal with sapphire.
- Swimming with it: the case is resealed after a new crystal, but only a pressure test documents what it can handle. The Water-Resistance Pressure Test ($175 for most brands, $190 for Omega) tests the crystal, crown and case back seals in a pressure chamber against the watch's stated rating.
What you pay door to door
- Most brands: $75 crystal + $30 shipping = $105.
- Crystal and battery together on a quartz watch at most brands: $75 + $30 + $30 shipping = $135.
- Omega crystal with a pressure test: $90 + $190 + $30 shipping = $310.
- Covering a $3,000 TAG Heuer in full: $155 crystal + $30 shipping + $72.50 coverage (2.5% of the $2,900 above the included $100) = $257.50.
Shipping is $30 per order by UPS, however many watches share the box. The prepaid label is ready in your account minutes after you order. Wrap the watch so it can't shift, put it in any sturdy small box with nothing on the outside naming the contents, and drop it at any UPS location. Coverage runs from the first UPS scan until it's signed for, and a signature is required at both ends. US addresses only. A crystal job comes back in about three weeks door to door, and the exact date shows before checkout.
Questions
Is it worth replacing a cracked watch crystal?
How much does sapphire crystal replacement cost?
Can I replace a watch crystal myself?
Will my watch be water-resistant again after a new crystal?
How much does watch glass replacement cost?
Can a pocket watch crystal be replaced?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list