Jewelry repair questions · Watches
Can an antique or vintage pocket watch be repaired?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Most can be repaired. A complete movement, even one silent for decades, is a normal candidate for service.
- The faults are predictable: a broken or tired mainspring, a broken balance staff after a drop, old oil, and a cracked or missing crystal.
- It isn't overwound. A fully wound watch that won't run has a dirty or dry movement, not a spring wound too far; more in can you overwind a watch?
- Parts decide the cost. Widely made American movements are usually easier to find parts for than rare or unmarked ones, and nobody can promise a part before seeing the watch.
Prices
| Service | Price | What's included |
|---|---|---|
| Mail-In Evaluation | $19 | A jeweler examines the whole watch under magnification and sends an itemized quote with photos; approve all, some or none. Credited in full toward approved work. Pocket watches aren't a separate line on the price list, so this is where they start. |
| Watch Overhaul | from $295 mechanical from $195 quartz | If the evaluation confirms an overhaul applies: movement taken out and apart, cleaned ultrasonically, inspected under magnification, re-oiled, regulated and cased. Worn parts are flagged before anything proceeds. |
| Watch Battery & Pressure Check | from $30 | For a quartz pocket watch: a new battery fitted and the watch checked. The gasket inspection and pressure check apply only where the case is sealed; most pocket watches aren't water resistant. |
| Watch Appraisal | from $115 | Written insurance-replacement-value appraisal with photographs. $130 for an Elgin ($115 + $15). Not a buying or pawn service. |
What usually goes wrong with a pocket watch
- The mainspring. Broken mainsprings were the largest cause of watch repairs until the 1960s, because carbon-steel springs failed from metal fatigue long before other parts. An antique may still carry its original steel spring, and one that hasn't broken can still be tired, running fewer hours on a full wind.
- The balance staff. The balance wheel swings on two very fine pivots. Shock protection for them only spread in the 1950s; before that, broken balance staffs were a common repair. A watch that stopped after a fall, or ticks weakly and stops when moved, may have this fault.
- Old oil and dirt. As a movement collects dirt and its oil dries, friction rises until the watch stops. That's why an old watch can be wound tight and still not run.
- The crystal. An open-face case has no metal cover over the crystal, so cracked, loose or missing crystals are common.
- The case. A hunter case has a spring-hinged lid over the crystal. A lid that won't snap shut, a dented back or a worn bow is a case fault rather than a movement fault; it's assessed in the evaluation and quoted only if it can be fixed.
Know what you have before you ship
- How does it wind? Until the third quarter of the 19th century, pocket watches were wound and set with a key. Stem winding, invented by Adrien Philippe in 1842, did away with the key. If yours winds with a key, send the key if you still have it.
- How does it set? If the crown winds but won't move the hands, don't force it. Lever-set watches, generally required on American railroads after about 1908, have a small setting lever under the bezel: unscrew or open the bezel and crystal, pull the lever out, then turn the crown. Never pry at the case to find it; pin-set watches have a small pin beside the stem that you press while turning the crown.
- Open face or hunter? On most antique and vintage hunter cases the lid hinge sits at 9 o'clock and the crown at 3. Railroad-grade watches were open-face, with the winding stem at 12 o'clock.
- Who made it? Watches by the big American makers survive in large numbers. See Elgin, Waltham and Hamilton watch repair.
- Quartz or mechanical? Modern quartz pocket watches take a battery. A glowing dial or hands on a watch older than the 1970s may be radium paint, which the EPA advises against taking apart; mention it when you book.
How a watchmaker approaches a pocket watch
- Intake. The watch is photographed the day it arrives at the New York studio, recording its condition, case and dial; the photos appear in your account.
- Evaluation. A jeweler examines movement and case under magnification and sends an itemized quote with photos: each fault, each fix, each price.
- Overhaul. If the movement needs a full service, it comes out of the case and apart, every part is cleaned ultrasonically, and the train, mainspring and jewels are inspected for wear. It's reassembled with the correct oil at each point, regulated and cased. Worn parts are flagged and priced before anything proceeds.
- Check and return. A bench jeweler does the work, a second jeweler checks it, and it's photographed again before it ships back by UPS, signature required. The work is done at the Sky Jewelry bench in New York, never outsourced.
What it costs at JewelryRepair.com
Pocket watches aren't listed as a separate service, so pricing starts with the Mail-In Evaluation: $19, credited in full toward the work you approve. For reference, these are the closest services on the live price list (Nov 18, 2026); the evaluation's quote tells you which apply to your watch:
- Watch Overhaul: $295 for a hand-wound movement with most brands ($195 base + $100 for a mechanical movement), $195 for quartz.
- Watch Crystal Replacement and Stem & Crown Replacement: $75 each for most brands, where a fitting crystal or stem can be found for your case.
- Watch Battery & Pressure Check: $30 for a new battery in a quartz pocket watch, most brands; the pressure check applies only where the case is sealed.
- Watch Appraisal: $115 for most brands, $130 for an Elgin ($115 + $15).
Worked example: the evaluation finds a hand-wound watch, most brands, that needs a full overhaul. Approve the $295 overhaul and you pay $276 more ($295 - $19). Shipping is $30 round trip per order, paid once at checkout, with $100 of coverage each way. To cover a $1,500 watch for its full value, coverage is 2.5% of the $1,400 above $100, or $35, one fee for both directions, up to $10,000.
JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by any watch brand, and we don't promise factory parts. If a modern pocket watch is still under a maker's warranty or service plan, check with the maker first, because outside service can void it. Sky Jewelry has been repairing watches and jewelry on Lenox Avenue since 1989, over 50,000 repairs since 1989, and JewelryRepair.com brings that New York bench to you by mail.
When it can't be fixed, and the alternatives
- Decline the quote. If a part can't be sourced, or the cost is more than the watch means to you, approve none of it. The watch ships back with the photos and findings, and the $30 round trip already covers the return.
- Approve part of it. A new crystal protects the dial now; the movement can wait.
- Keep it as an heirloom. Store it dry and keep the chain, key, box and papers with it.
- Ask before you ship. Send photos through the on-site chat or the contact page for a free quote; a jeweler replies within 1 business day, and nothing ships until you've seen the price.
Questions
How much does it cost to repair a pocket watch?
How much does it cost to clean a pocket watch?
My pocket watch winds but won't run. What's wrong?
How do I set the time on an old pocket watch?
Can a key-wind pocket watch be repaired?
Is my pocket watch case solid gold?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list