Jewelry repair questions · Watches
What happens during a watch service (overhaul), and how often does a watch need one?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- A service is maintenance for the movement. It comes out of the case, is taken apart and cleaned, checked for wear, re-oiled, put back together, regulated and resealed. It isn't a battery change and it isn't an exterior clean.
- Why it's needed: movements get dirty and their lubricants dry up. Seiko's manuals warn that contaminated oil lets parts abrade, which is how a maintenance job turns into a parts job.
- How often: follow your maker's manual for your model; published intervals run from about 2 years to 8.
- Don't wait for the calendar if the watch gains or loses time, stops, or (on a quartz watch) dies again soon after a new battery. Not sure whether it needs a battery or a full service? Through the Start a Repair wizard, a watch that stops or runs fast gets a free diagnosis first (battery from $30, overhaul from $195), and you approve any work.
- At JewelryRepair.com: a Watch Overhaul is $195 for quartz and $295 for mechanical with most brands. If the watch is still under the maker's warranty or a service plan, go to the maker first, because an outside overhaul can void it.
Prices
| Service | Price | What's included |
|---|---|---|
| Watch Overhaul | from $195 quartz from $295 mechanical | Movement removed and disassembled, every part cleaned ultrasonically, train, mainspring and jewels inspected under magnification, re-oiled, regulated, gaskets checked and the case resealed; exterior clean and inspection included. Worn parts flagged before anything proceeds. Can't be rushed. |
| Watch Battery & Pressure Check | from $30 | For a quartz watch whose only problem is a flat cell: new battery, gasket inspection and a pressure check. |
| Water-Resistance Pressure Test | from $175 | Documented pressure-chamber test against the watch's stated depth rating; resealing quoted if it fails. |
| Mail-In Evaluation | $19 | For a fault you can't pin down: examined under magnification, photographed and quoted item by item. Credited in full. |
At the bench, stage by stage
This is what a full service involves at the New York studio of JewelryRepair.com, and what each stage is for.
- Taking it apart. The case is opened and the movement removed and disassembled. Every part comes out, because old oil sits in the bearings and between moving surfaces where no brush can reach.
- Cleaning. Every component is cleaned ultrasonically to lift the thickened oil and the fine wear debris it has picked up. Oil that is old and dirty doesn't just stop protecting the parts; carrying grit, it wears them, which is the abrasion Seiko warns about.
- Inspection. The gear train, mainspring and jewels are checked under magnification. In a mechanical watch the mainspring stores the power, the gear train carries it to the escapement, and the escapement lets the train advance a fixed step with each swing of the balance wheel. The jewels are synthetic bearings chosen for their low, predictable friction. Anything worn is flagged to you with photos and an itemized price before work goes on.
- Reassembly and oiling. The movement goes back together with the correct oil at each point, since different pivots take different oils. On a jeweled bearing, a small cup in the jewel holds the oil against the pivot by capillary action.
- Regulation. The rate is adjusted for accuracy, so the watch keeps time as consistently as its movement allows.
- Casing and sealing. The movement is cased and the gaskets are checked so the seal is sound. Seiko notes that tired gaskets let perspiration and moisture in.
- Finishing and checks. The outside gets a professional clean and inspection, a second jeweler checks the work, and the watch is photographed again before it ships back.
How often does a watch need a service?
There is no universal number. Makers set intervals for their own movements, and they differ:
- Seiko: its manuals give about every 2 to 3 years for many calibres, such as the 4R automatics, and about every 3 to 4 years for the 5R65 and 5R66 Spring Drive calibres.
- Omega: a complete service every 5 to 8 years, and the water resistance checked once a year.
If your maker publishes an interval for your model, use it. Three things matter in practice. Lubricants dry up with time, so a watch that has spent years in a drawer is not fresh just because nobody wore it. Water resistance runs on its own clock: Omega advises a yearly check, and Seiko notes that opening the case back, even for a battery, can reduce water resistance, so a test afterward is worth asking for. And symptoms beat the calendar: a watch that gains or loses noticeably, stops while you wear it, or (if quartz) stops again soon after a fresh battery needs service now, whatever the date.
Quartz watches need it too. Their quartz crystal vibrates 32,768 times a second; a circuit counts those vibrations and sends one pulse a second to a small stepping motor, which still turns the hands through a train of gears. When that train gums up, a new battery won't fix it.
Quartz or mechanical: why the price differs
A mechanical watch, hand-wound or automatic, is all moving parts: mainspring, gear train, escapement and balance, each with its own wear points and oils. A quartz watch has far fewer. That is why the overhaul here is $195 for quartz and $100 more for mechanical, so $295 with most brands; hand-wound and automatic watches are both priced as mechanical. Not sure which yours is? Choose "Don't know" when you book. The movement is confirmed when the watch arrives, and if the price changes you approve it before work begins.
Some brands carry a surcharge on top of these prices; the watch service cost answer lists every one, and each brand has its own page under watch repair by brand.
What the bench doesn't touch during a service, and why
- Worn parts aren't swapped on the jeweler's own say-so. Inspection is where wear shows up, but a part that needs replacing is flagged with photos and an itemized price, and nothing beyond what you approve is charged. If you decline, the watch comes back with nothing more to pay. On older movements, which parts still exist can limit the options.
- The outside gets a professional clean and inspection. The service is about the movement; deep scratches or dents in the case or bracelet are quoted separately (free quote).
- The seal is checked, not certified. Gaskets are inspected when the case is closed, but a measured result against the depth rating needs its own chamber test, the Water-Resistance Pressure Test. Other faults such as a cracked crystal or a broken crown are separate repairs on the watch services list.
- The process isn't rushed. Overhauls can't be rushed. For a watch type not on the service list, ask for a free quote or book the $19 Mail-In Evaluation, credited in full.
Sending a watch in for service
Book the overhaul on the repair page, where the price and a "Back in your hands by" date show before you pay. An overhaul takes longer than the roughly three weeks most repairs take, and the date includes UPS transit both ways. The prepaid label is in your account; pack the watch so it can't shift, in a plain box with nothing on the outside naming the contents, and drop it at any UPS location. Shipping is $30 round trip with $100 of coverage each way. Full value up to $10,000 costs 2.5% of the value above $100, so covering a $3,000 watch is $72.50 (2.5% of $2,900), both directions, from the first UPS scan until it is signed for.
JewelryRepair.com is the mail-in service of Sky Jewelry, family jewelers on Lenox Avenue since 1989 with over 50,000 repairs since 1989. It is an independent repair service, not affiliated with, authorized by or endorsed by any watch brand, and it doesn't promise factory parts. The overhaul carries the 1-year workmanship guarantee from the day the watch is delivered back. For how this compares with the maker's own service, see independent watch repair vs a brand service center.
Questions
Is a watch service the same as a battery change?
Do automatic watches need servicing if I wear them every day?
What happens if you never service a watch?
How long does a watch service take?
Will servicing my watch somewhere else void the warranty?
Does a watch service include polishing the case?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list