Jewelry repair questions · Watches
Why is my watch running slow (or fast)?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Measure before you worry. Check it against an exact time source for a few days. A steady few seconds a day is normal for a mechanical watch; minutes are not.
- Quartz losing time: rule out the battery first. A healthy quartz watch drifts about 15 seconds a month, so losing minutes means something is wrong. A fresh battery and an inspection is the cheap first step; if the timekeeping doesn't recover, the movement needs service.
- Mechanical watch suddenly far off? Think magnetism (phones, tablet covers, bag clasps, speakers) or a recent knock.
- Slowly getting worse over the years? It is probably due for service. Omega suggests a service every 5 to 8 years, and Seiko's manual for its 5R Spring Drive calibers about every 3 to 4.
- Still under the maker's warranty? Take it to the maker first, because outside service can void the warranty.
Prices
| Service | Price | What's included |
|---|---|---|
| Watch Battery & Pressure Check | from $30 | The first step for a quartz watch that has started losing time: the case back opened with the correct tool, contacts and movement inspected, a fresh silver-oxide cell of the size the caliber specifies, gaskets checked and a pressure check. Dual battery +$30, solar cell +$85; some brands add a charge (Omega $45, Longines $50). |
| Watch Overhaul | from $195 quartz from $295 mechanical | The repair that treats drift at its cause: movement removed and taken apart, every part cleaned ultrasonically, train, mainspring and jewels inspected under magnification, re-oiled with the correct oil at each point, regulated for accuracy and resealed. Worn parts are flagged before anything proceeds, and if the scope changes, you approve it first. Can't be rushed. Under the maker's warranty? Go to the maker first. |
| Mail-In Evaluation | $19 | For a watch that runs erratically, or one you suspect is magnetized or was knocked: examined under magnification, photographed and quoted item by item before any work. Credited in full toward the repair. |
First, measure the drift: it tells you a lot
Before anyone opens the case, find out how far off the watch is and whether the error is steady.
- Set it exactly to an official source such as NIST's time.gov, second hand on the mark.
- Check it at the same time every day for three to five days and write down how many seconds it has gained or lost.
- Note which way it lay overnight, then divide by the days for a daily rate.
Then compare it with what the watch should do. Wikipedia's quartz clock entry puts ordinary quartz watches at roughly 15 seconds per 30 days, which is half a second a day. A quartz watch losing two minutes a week is losing about 17 seconds a day (120 ÷ 7), more than 30 times its normal drift. For mechanical watches, the strict end of the scale is the COSC chronometer test: an average of −4 to +6 seconds a day, checked in five positions and at 8, 23 and 38 °C. Many everyday automatics are specified more loosely, so check the rate your manual states.
The pattern matters as much as the number. A steady small error points to regulation. A sudden large change points to magnetism or a knock. An error that keeps growing, or a watch that stops and starts, points to a movement that needs service.
Quartz watch running slow: the usual causes
- Rule out the battery. A quartz watch that loses noticeable time or stops should get a fresh battery and an inspection first. Many quartz watches warn you when the cell is nearly empty: Omega says its second hand then moves in 4-second jumps, and the watch keeps running for a few more days. Replace it promptly, because Omega notes a leaking cell could damage the movement.
- A digital watch works the same way: Seiko's manual for one digital caliber says that once the battery warning icon lights, it may stop within 2 to 3 days.
- A fresh battery didn't fix it. Then the movement needs a closer look: dirt or old oil in the gear train, or hands touching each other, the dial or the crystal. That is a movement service, not a battery job.
- Cold, heat and age: small effects. A quartz crystal works best at about 25 to 28 °C. Wikipedia's figures show that running 10 °C away from that costs about 110 seconds a year, roughly a third of a second a day, and crystals drift most in their first year. Real, but far too small to explain minutes.
- A quartz watch running fast is less common and usually isn't explained by the battery, so it needs a closer look, which is what the evaluation is for.
Mechanical or automatic watch running slow or fast
A mechanical watch keeps time with a balance wheel swinging back and forth several times a second, driven by a mainspring. Anything that changes how evenly it swings changes the rate.
- Magnetism. Seiko's manual for its 5R Spring Drive calibers says that near a magnetic field the watch may temporarily gain or lose time or stop, lists smartphones and tablet covers, AC adapters, bags with magnetic buckles, electric shavers, speakers and magnetic necklaces, and says a watch without an anti-magnetic marking should be kept more than 10 cm from them. Omega adds refrigerators and handbag clasps. Even the ISO 764 anti-magnetic standard only asks a watch to resist 4,800 A/m and stay within 30 seconds a day of its earlier rate. A sudden, large change after a day beside a laptop or phone is the classic pattern; see is my watch magnetized?
- A low wind. The mainspring's force falls as it unwinds, and most movements run between 36 and 72 hours on a full wind. An automatic worn only a few hours a day may spend its life near empty and lose time. Wind it fully by the crown if your movement allows hand-winding; see how to wind an automatic or manual watch.
- Position. Friction at the balance pivots changes with orientation, so a watch runs at slightly different rates dial up, dial down and crown down. The way a watch rests overnight can nudge the next day's reading.
- Temperature or a knock. The same Seiko manual's troubleshooting page lists a watch left in extreme heat or cold, and one that was dropped, hit or worn for active sports. Bring it back to normal temperature and reset it; if accuracy doesn't return, it needs a watchmaker.
- Aging oil and wear. A movement runs in oil, and oil doesn't last forever, which is why makers publish service intervals (Omega: every 5 to 8 years). Gradually worsening accuracy, or stopping overnight, is the usual sign it's due.
- A brand-new automatic running slow outside its stated accuracy is a warranty matter for the maker or seller.
- A pocket watch is mechanical too and drifts for the same reasons. An old or unfamiliar one starts with the Mail-In Evaluation.
How a watchmaker finds and fixes it
Regulating a watch means adjusting how fast the balance swings. On a traditional regulator, shortening the working length of the balance spring makes it stiffer, so the watch runs faster; lengthening it slows the watch down. That suits a clean, healthy movement; on one with dried oil or a magnetized part, it only hides the symptom for a while.
That is why, at JewelryRepair.com, the fix for drift at its cause is the Watch Overhaul. The movement comes out of the case and is taken apart, every component is cleaned ultrasonically, and the train, mainspring and jewels are inspected under magnification. Worn parts are flagged before anything proceeds. The movement is then reassembled, lubricated with the correct oil at each point, regulated for accuracy and resealed. Regulation and demagnetizing aren't listed as separate services on our menu.
For a quartz watch the first step is cheaper: Watch Battery & Pressure Check fits a fresh cell of the size the caliber specifies, then checks the gaskets and pressure-tests the case. If the watch still loses time on a new battery, the next step is a quartz overhaul.
Can I fix it myself?
- Yes, the free checks. Reset it, wind it fully, change its overnight resting position and keep it away from magnets for a few days, then measure again.
- A quartz battery, with care. Possible with the right case tool, but Seiko notes that opening the case back can reduce water resistance and recommends a water-resistance test at each battery change for watches rated 10 bar or more.
- Not the movement. Moving the regulator or demagnetizing at home means opening the case and working beside the balance spring, the most delicate part of the watch.
What it costs at JewelryRepair.com
Prices from the live repair pages, Nov 18, 2026, for most brands:
- Quartz, probably the battery: Watch Battery & Pressure Check, $30. A dual-battery watch is $60 ($30 + $30) and a solar cell $115 ($30 + $85).
- Quartz that still loses time on a new battery: Watch Overhaul, $195.
- Mechanical or automatic: Watch Overhaul, $295 ($195 + $100). With a brand charge, Omega is $310 ($195 + $100 + $15) and Rolex $495 ($195 + $100 + $200). Worn parts are flagged before anything proceeds, if the scope changes you approve it first, and an overhaul can't be rushed.
- Not sure what's wrong: in the Start a Repair wizard, a watch that runs fast or stops goes to a free diagnosis first, and you approve any work. A free quote through the on-site chat or contact page and the Mail-In Evaluation ($19, credited in full) are the other routes.
A watch ships for $30 round trip per order by UPS, with the prepaid label ready in your account and $100 of coverage each way. Insuring a $2,000 watch at full value costs $47.50 (2.5% of the $1,900 above $100), both directions, from the first UPS scan until it is signed for. It is photographed when it arrives at our New York studio and before it ships back, and the work carries the 1-year workmanship guarantee.
JewelryRepair.com is run by Sky Jewelry, family jewelers on Lenox Avenue since 1989 with over 50,000 repairs since 1989, and is an independent repair service, not affiliated with, authorized by or endorsed by any watch brand. Under the maker's warranty or a service plan? Check with the maker first, because outside service can void it.
Questions
How many seconds a day should an automatic watch gain or lose?
Can a magnet make my watch run fast?
Does a quartz watch run slow when the battery is dying?
Why does my automatic watch lose time when I don't wear it much?
Should I get my watch regulated or fully serviced?
Can I send a watch that's still under warranty?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list