Jewelry repair questions · Watches

Is my watch magnetized, and how is it fixed?

Possibly, if a mechanical watch that kept good time suddenly gains minutes a day after a night near a phone, speaker or magnetic clasp; a strongly magnetized one can also lose time or stop. A watchmaker can demagnetize it without opening the case, then recheck the rate. At JewelryRepair.com a watch that runs fast or stops gets a free diagnosis first.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

4,800 A/mthe field an ISO 764 anti-magnetic watch must withstand, about 60 gauss, staying within 30 sec a day
10 cm(about 4 in): the distance Seiko's Spring Drive manual sets from phones, adapters and magnetic clasps for a watch with no anti-magnetic mark
$295mechanical Watch Overhaul, most brands, if the watch needs regulating or a service as well ($195 + $100)
50,000+repairs since 1989

The short version

  • The classic sign: a mechanical watch that kept steady time suddenly runs fast by minutes a day, often right after a night beside a phone, laptop, speaker or a bag with a magnetic clasp.
  • It can also run slow or stop. Seiko's manual lists gaining, losing time and stopping as effects of a magnetic field.
  • A home compass test is only a hint. A compass also reacts to ordinary steel.
  • The fix is quick when it's only magnetism: the watch is demagnetized, then the rate is checked on a timing machine.
  • Prevention is distance. Keep a watch with no anti-magnetic mark more than 10 cm (about 4 in) from phones and tablets, AC adapters, speakers, shavers, radios and magnetic bag buckles or tablet case clasps.

Prices

Service PriceWhat's included
Mail-In Evaluation $19For a watch that suddenly runs slow, or any symptom the wizard doesn't route to a free diagnosis: examined under magnification, photographed and quoted item by item before any work, and credited in full toward the repair. A watch that runs fast or stops gets the wizard's free diagnosis instead.
Watch Overhaul from $195 quartz
from $295 mechanical
Only when the rate is still off after the magnetism is dealt with, or the watch is due anyway: movement taken apart, cleaned ultrasonically, inspected, re-oiled, regulated for accuracy and resealed. Worn parts are flagged for your approval first. Can't be rushed.

Why magnetism throws a watch off

A mechanical watch keeps time with a balance wheel that swings back and forth several times a second, its pace set by a hair-fine coiled spring. When a strong field reaches a movement with steel parts, the balance spring can become magnetized; a watchmaker on Omega Forums describes the coils as getting bunched up. That throws off the spring's regular breathing, and the usual result is a watch that suddenly gains time.

Fast is the most common result, not the only one. Seiko's manual says a watch near a magnetic field may temporarily gain or lose time or stop, and a watchmaker on Omega Forums notes that a heavily magnetized balance spring can leave a watch barely running. The magnetism can stay in the parts after the source is gone, which is why a watch can keep misbehaving long after it was moved away from the phone or speaker. That Seiko manual covers its Spring Drive calibers, whose regulator contains a magnet, so treat its figures as a guide rather than a rule for every mechanical watch.

How anti-magnetic watches resist it

Wikipedia's entry on anti-magnetic watches describes two defenses: balance parts made from alloys that magnetism barely affects, and a soft-iron inner case that keeps fields away from the movement. Its balance spring article adds that silicon springs are not susceptible to magnetization. The ratings:

  • ISO 764 "anti-magnetic": the watch must withstand 4,800 A/m and afterwards keep within 30 seconds a day of its earlier rate. That's about 60 gauss (4,800 A/m × 4π × 10⁻⁷ = 0.006 tesla), enough for everyday life but not for a strong magnet held right against it.
  • Japanese JIS marks: Seiko's Spring Drive manual sets the safe distance by marking: more than 10 cm for a watch with no anti-magnetic mark on the case back, more than 5 cm (about 2 in) for JIS level 1, and more than 1 cm for level 2.
  • High-resistance watches: some are rated to 1,000 gauss (80,000 A/m), and watches certified to the METAS standard are tested at 1.5 tesla (15,000 gauss) and must deviate by no more than 5 seconds a day afterwards.

How to tell if your watch is magnetized

  • Look at the pattern. Time the watch against an exact source such as NIST's time.gov for a few days. A watch that was steady and is suddenly minutes a day off, with no knock to explain it, fits magnetism. A drift that has crept up over years points to aging oil instead; that's the subject of why a watch runs slow or fast.
  • Try the compass test, but don't trust it alone. Bring the watch slowly toward a compass or a phone's compass app. If the needle swings toward it, the movement may be magnetized, but watchmakers on Omega Forums point out that unmagnetized steel, such as a steel case, can move the needle too.
  • The bench test is decisive. A watchmaker measures the rate on a timing machine, demagnetizes the watch and measures again. If the rate changes, it was magnetized. If not, the cause lies elsewhere, such as oil or dirt on the balance spring.

How a watchmaker fixes it

Demagnetizing doesn't require opening the case. A demagnetizer produces an alternating magnetic field; with it switched on, the watch is held on or just above the device, then drawn slowly away to about arm's length before the field is switched off. Pulling away too quickly, Omega Forums watchmakers note, can leave the job undone.

Then the rate is measured again. If magnetism was the whole problem, the watch returns to its usual accuracy and nothing else is needed. If it's still off, the balance may need regulating or the movement may be due for service, and regulating a dirty movement only hides the symptom for a while.

Can I demagnetize a watch myself?

You can. Inexpensive demagnetizers are sold for exactly this, the watch stays closed, and a watchmaker on Omega Forums says demagnetizing won't harm a watch. Place the watch on the pad, hold the button down, lift the watch slowly away as far as your arm reaches before releasing, then time it for a day or two. Two limits: one forum member warns never to demagnetize a balance and balance spring taken out of a watch, and if the rate doesn't change after a few careful passes, stop, because the problem isn't magnetism.

What it costs at JewelryRepair.com

Demagnetizing isn't listed as a separate service on our menu, so a watch you suspect is magnetized starts with a diagnosis, and you see the price of anything it needs before any work:

  • Runs fast or has stopped: the Start a Repair wizard sends it to a free diagnosis first.
  • Runs slow, or you'd rather book directly: the Mail-In Evaluation, $19, credited in full toward the repair.
  • Still off after the magnetism is dealt with: regulation is part of the Watch Overhaul, $295 for a mechanical watch of most brands ($195 + $100) and $195 for quartz. Brand charges are shown on the product page.

The only other cost is UPS shipping, $30 round trip per order with the prepaid label in your account; full-value coverage is explained on the shipping and insurance page. JewelryRepair.com, the mail-in service of Sky Jewelry (over 50,000 repairs since 1989), is an independent repair service, not affiliated with, authorized by or endorsed by any watch brand; if your watch is under the maker's warranty or a service plan, check with the maker first, because outside service can void it.

Questions

Can a magnetized watch run slow?
Yes, though running fast is more common. Seiko's manual says a watch near a magnetic field may temporarily gain or lose time or stop, and a watchmaker on Omega Forums notes that a heavily magnetized balance spring can leave a watch barely running. If yours started losing time suddenly after sitting near a magnet, a demagnetizer and a timing check settle it; if it has slowed gradually over years, see why a watch runs slow or fast.
Can my phone magnetize my watch?
It can. Seiko lists smartphones and tablets, through their speakers and cover magnets, among everyday sources that can make a watch gain or lose time or stop, and advises keeping a watch with no anti-magnetic mark more than 10 cm (about 4 inches) away. Avoid leaving it beside a phone overnight. If it now runs fast or slow, a timing check before and after demagnetizing shows whether magnetism is the cause.
Does magnetism permanently damage a watch?
Usually not. Magnetism leaves the balance spring's coils bunched up, as a watchmaker on Omega Forums puts it, and throws off the rate, but once the movement is demagnetized, a healthy watch normally returns to its usual accuracy. If it doesn't, something else is wrong, such as aging oil or a knock, and the watch needs regulating or a full service. At JewelryRepair.com that starts with a diagnosis, and a mechanical Watch Overhaul is $295 for most brands.
How much does it cost to demagnetize a watch?
At JewelryRepair.com demagnetizing isn't sold as a separate menu item. A watch that runs fast or stops goes to a free diagnosis through the Start a Repair wizard, or you can book the $19 Mail-In Evaluation, credited in full; either way you see the price before any work. If the watch also needs regulating or servicing, the mechanical Watch Overhaul, which includes regulation, is $295 for most brands.
Is the compass test for a magnetized watch reliable?
Only as a hint. A compass needle that swings toward a watch brought slowly up to it suggests a magnetized movement, but watchmakers point out that a compass also reacts to ordinary, unmagnetized steel, so a steel case can move the needle on its own. The reliable test happens on a timing machine: measure the rate, demagnetize the watch, then measure again. A clear change in rate confirms it was magnetized.