Jewelry repair questions · Metals, plating & finishing

Can you gold plate or rhodium plate jewelry at home, and will it last?

You can, with an electroplating kit or a plating pen, but most home results are a thin flash coat that wears quickly: adhesion depends on spotless preparation, and thickness depends on time and control. The solutions can be toxic or corrosive, too. JewelryRepair.com gold plates jewelry by mail from $60 and rhodium plates from $69.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

0.175 micronsFTC minimum for "gold electroplate" (2.5 for heavy gold electroplate)
$60gold plating a silver ring or pendant, flash coat, yellow gold
$69rhodium plating a sterling silver ring, polish included
50,000+repairs since 1989

The short version

  • Home plating uses the same principle as a professional bath: an electric current deposits metal from a solution onto the piece.
  • Preparation decides whether it sticks. Even a trace of oil can stop the new layer bonding.
  • Thickness decides how long it lasts, and home kits and pens rarely build much of it.
  • The chemicals are the real risk. Gold plating salts can be cyanide compounds, and rhodium solutions are corrosive.
  • Fine for costume pieces and practice; a poor choice for heirlooms, pieces with pearls or soft stones, earrings for sensitive ears, or anything you'll sell as "gold plated."

Prices

Service PriceWhat's included
Gold Plating $60 silver ring, flash
$310 silver ring, 1–2 microns
Base metal polished, cleaned ultrasonically and by steam, and activated so the gold bonds metal to metal; stainless steel and copper get an underlayer first. Yellow, rose (+$52) or white (+$65) gold, from a flash coat up to 4+ microns (+$250 to +$475). Item and base metal set the rest.
Rhodium Plating from $69The piece is stripped back, polished to a flawless surface, cleaned until chemically clean and re-plated. Earrings or a bracelet add $20, a necklace $40; white gold adds $8 and 14K $2. Black rhodium, black antiquing and oxidation are add-ons.
Metal Testing & Verification $15Not sure what's under the old plating? Hallmarks checked and the metal tested and documented, so the plating plan and price fit the real base metal.

How plating works, and where home kits fall short

In electroplating, the jewelry is wired as the negative electrode and hung in a solution of dissolved metal; current carries that metal onto every surface. The longer and more evenly it runs, the thicker the layer. The "gold plating solution" or "gold electroplating solution" sold with a kit is that electrolyte: a dissolved gold salt that deposits only while current flows. A plating pen is a small version of brush plating, in which a brush or wick saturated with solution is the other electrode and is stroked over the piece. Wikipedia's article on electroplating notes that brush plating takes more operator involvement and has trouble achieving as great a plate thickness, which is exactly the limit of a pen on jewelry.

Thickness is the whole question when you ask whether it will last. Wikipedia's article on gold plating says thickness determines how long gold plating lasts with use, and that the jewelry trade calls a layer under 0.5 microns flash or washed gold. The FTC's Jewelry Guides set the US labeling lines: to be called gold electroplate, the layer must be at least 10 karat and at least 0.175 microns of fine gold, about 7 millionths of an inch, and "heavy gold electroplate" needs 2.5 microns. Unless you can measure what you deposited, assume a home coat is a flash coat.

Preparation: the part kits make look easy

Wikipedia's article on electroplating is blunt about it: cleanliness is essential, because molecular layers of oil can prevent adhesion. Plating also copies whatever lies beneath it, so every scratch, pit and patch of tarnish shows through the new color. That's why the professional sequence spends most of its time before the bath:

  • Polish first. At our bench the base metal is polished to a clean, bright surface; for rhodium, to a flawless one, because rhodium reproduces every scratch.
  • Clean until chemically clean. Ultrasonic and steam cleaning remove compound and skin oil. Soap has to be rinsed off completely, since soap residue can hide contamination.
  • Activate the surface so the plating bonds metal to metal rather than sitting on residue.
  • Add an underlayer where the metal needs one. Stainless steel and copper resist plating and get an underlayer first.

Silver raises a separate chemistry question. Wikipedia's gold plating article notes that silver atoms diffuse into a gold layer and tarnish it, and that plating chemists often put a barrier of nickel or rhodium between the two. Home kits that follow that advice raise a skin question. The American Academy of Dermatology estimates that more than 18 percent of people in North America are allergic to nickel, and names earrings and earring backs among the biggest culprits. If a kit's instructions call for a nickel layer, think twice before using it on earring posts; see rhodium plating earrings for sensitive ears.

Safety: what's in the bottle

  • Gold solutions. Potassium dicyanoaurate, a gold cyanide salt, is often used in gold plating; Wikipedia notes that swallowing gram quantities can be fatal. Non-cyanide gold baths, usually sulfite- or chloride-based, also exist. Read the safety data sheet before you buy, not after.
  • Rhodium solutions. Rhodium plating uses a dissolved rhodium salt, and rhodium salts can be seriously hazardous: rhodium(III) sulfate, for example, carries the GHS corrosive pictogram and the signal word "Danger." Handle any rhodium solution by its safety data sheet, as a chemical, not a craft supply.
  • Pen and brush plating. Electroplating solutions in general are often toxic, Wikipedia notes, and a pen holds the same kind of chemistry in a smaller bottle.
  • Rhodium "dips." Rhodium is applied by electroplating, so a so-called rhodium dip still needs current running through the piece, and dipping metal that hasn't been polished and chemically cleaned leaves a patchy coat.
  • Work like it matters: gloves and eye protection, good ventilation, nowhere near food, children or pets, and never down the drain. Follow the safety data sheet and your local hazardous-waste rules for disposal.
  • Keep stones out of the bath. GIA warns that everyday chemicals such as cosmetics can permanently damage the surface of pearls and porous gems like turquoise, and that heat can crack opals and dull their play-of-color. A plating bath brings both chemicals and, often, heat. Glued-in stones and foil-backed glass don't belong in a plating bath either.

Will it last?

Plating wears where the piece rubs: the palm side of a ring, the edges of a bangle, the clasp end of a chain, earring posts. Even professionally applied rhodium, done over a polished and fully cleaned surface, lasts about 1 to 3 years on a ring, and toward the short end, 12 to 24 months, on engagement rings and wedding bands worn every day, according to our rhodium plating cost guide. A thinner home coat has less to wear through, and any gap in the preparation weakens the bond, so expect it to go sooner, especially on rings.

Signs a plated piece has worn through: a different color at an edge or on the back of a ring, patchy color after polishing, or dark spots on gold-plated silver where the silver is tarnishing through a thin spot. For gold specifically, see how long gold plating lasts.

When home plating makes sense, and when to send it out

  • Reasonable at home: refreshing costume pieces, practicing on scrap, finishing your own craft findings, and accepting that you'll redo it.
  • Send it out: heirlooms and solid gold you're changing color on; pieces with pearls, opal, turquoise or glued stones; earrings for sensitive ears; and white gold that's turning yellow, where Rhodium Plating includes the polish: $79 for a 14K white gold ring ($69 + $8 + $2).
  • Selling what you plate? The FTC's guides apply to how you describe it: calling a piece gold electroplate is misleading unless the layer is at least 10 karat and at least 0.175 microns thick. A home flash coat may not reach that, so don't use the term unless you can measure it.
  • Not sure of the base metal? Brass, copper, silver and steel each need different preparation. Metal Testing & Verification is $15 per item.
  • The honest math on fashion jewelry: re-plating can cost more than an inexpensive piece did new, so professional plating makes most sense for something you love or can't replace.

What it costs at JewelryRepair.com

Prices from the live repair pages, Nov 18, 2026, each including the preparation and our 1-year workmanship guarantee, which covers plating that wears prematurely:

  • Gold Plating, silver base, yellow gold flash coat: $60 for a ring or pendant, $85 for earrings ($60 + $25), $95 for a bracelet ($60 + $35), $110 for a necklace ($60 + $50).
  • Thicker layers for daily wear: a silver ring at 1–2 microns is $310 ($60 + $250), at 2–3 microns $385 ($60 + $325), at 4+ microns $535 ($60 + $475).
  • Other colors: rose gold adds $52 and white gold $65, so a silver ring in rose gold flash is $112.
  • Other base metals: a brass ring is $173 ($60 + $113), brass earrings $198 ($60 + $25 + $113), a stainless steel ring $211 ($60 + $151), a copper ring $240 ($60 + $180).
  • Rhodium Plating: $69 for a sterling silver ring or pendant, $89 for silver earrings ($69 + $20), $74 for a gold-plated or fashion ring ($69 + $5), $79 for a 14K white gold ring. Black rhodium adds $24.

Shipping is $30 round trip per order by UPS, the same however many pieces are in the box, with the prepaid label in your account and $100 of coverage each way. We photograph each piece as it arrives, worn plating and all, and again in its new finish before it goes back in a plain box. A bench jeweler plates it and a second jeweler checks the color and coverage. JewelryRepair.com is the mail-in service of Sky Jewelry's New York studio: family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.

Questions

Do gold plating pens work on jewelry?
They work for small touch-ups, not for a lasting finish. A pen is a form of brush plating, which Wikipedia notes has trouble reaching as great a plate thickness as a bath, so you get a thin, uneven layer that wears quickly on rings and bracelets. Results depend on cleaning the metal perfectly first. For costume pieces it's a reasonable experiment; for anything you wear daily, a professional bath lasts longer.
How long does home gold plating last?
There's no reliable figure, because it depends on how thick a layer you built and how well it bonded, and a home coat is usually a flash coat. Thickness determines how long gold plating lasts with use, and the jewelry trade calls anything under 0.5 microns flash or washed gold. Expect a ring's palm side to wear first. Professional thicknesses here run from flash to 4+ microns.
Is gold plating solution dangerous?
It can be. Potassium dicyanoaurate, a gold cyanide salt often used in gold plating, is toxic, and Wikipedia notes that swallowing gram quantities can be fatal. Some kits use non-cyanide sulfite or chloride solutions instead. Either way, read the safety data sheet first, wear gloves and eye protection, ventilate, keep it away from food, children and pets, and dispose of it as hazardous waste.
Can I rhodium plate white gold at home?
You can buy a kit, but rhodium salts such as rhodium(III) sulfate are classed as corrosive, the plating still needs current, and rhodium reproduces every scratch and trace of oil underneath, so the polish and cleaning have to be flawless. Even professional rhodium lasts about 1 to 3 years on a ring, by our cost guide's estimate. At JewelryRepair.com, Rhodium Plating a 14K white gold ring is $79 ($69 + $8 + $2), polish included.
Can you plate over old, worn plating?
Not well. New plating copies whatever is underneath, so worn patches, tarnish and residue show through or stop the new layer bonding. The old surface has to be polished back to sound, clean metal first. That preparation is most of the professional job: Gold Plating at JewelryRepair.com includes the polish, ultrasonic and steam cleaning and activation, from $60 for a silver ring.
Will home plating hide tarnish on sterling silver?
Only briefly, if at all. Tarnish is a surface layer, and plating over it means bonding to residue instead of metal, so the new layer can peel or spot. Clean and polish the silver back to bright metal first. Even then, Wikipedia notes that silver atoms diffuse into a gold layer over time, which is why plated silver can darken again unless a barrier layer sits between them.