Jewelry repair questions · Rings & sizing

Why is there a gap between my engagement ring and wedding band, and can it be fixed?

Usually because part of the engagement ring sticks out past its band: a low-set stone, a halo, or prongs overhanging the shank stop a straight band from touching. It's common, not a defect. A band shaped to fit or a setting change can close it; at JewelryRepair.com both start with a $10 Custom Work estimate.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$10Custom Work estimate for a fitted band or a setting change
$62two rings soldered together, sterling silver
$57re-tipping 1 to 4 worn prongs in 14K white gold ($29 + $23 + $5)
50,000+repairs since 1989

The short version

  • Why it happens: where the rings meet, something on the engagement ring is wider than its band: a low-set stone, a halo, the basket, prongs or a bezel, or flared shoulders. A straight band touches that first and stops short.
  • Is it a problem? Not in itself; it becomes one when the rings rub, scratch or slide out of line, or the band rides against the prongs.
  • Lasting fixes: a band contoured or notched to fit, or a change to the setting. Both are custom work, quoted first.
  • Soldering holds the rings in line but doesn't fill the gap.
  • At JewelryRepair.com: fitting and setting changes start with the $10 Custom Work estimate; Solder Rings Together is from $62.

Prices

Service PriceWhat's included
Custom Work & Modifications $10A band contoured or notched to fit, or a change to the engagement ring's setting: a jeweler reviews your photos and quotes the work line by line before anything ships.
Solder Rings Together from $62 two rings, sterling silver
$72 two rings, 14K yellow gold
The rings are seated as you wear them, tacked at two or three contact points and soldered along the join. It holds the set in line but doesn't fill a gap. 14K yellow gold $72, 14K white gold $77, platinum $136.
Prong Re-Tipping from $29 1 to 4 prongs, sterling silver
$57 1 to 4 prongs, 14K white gold
New metal laser-welded onto prong tips worn down by a band riding against them, shaped and seated back over the stone. 14K white gold $57.
Mail-In Evaluation $19Both rings examined under magnification, with an itemized quote and photos, when you're not sure what's causing the gap or what to do about it.

Why a wedding band won't sit flush

A band sits flush only when the side of the engagement ring facing it is no wider than the band, all the way around. Most engagement rings are slim at the back and widest at the top, where the stone is held, and that's where gaps start:

  • A low-set center stone. Jewelers Mutual notes that on a low-set ring the stone sits closer to the finger and may extend slightly beyond the band. The stone or its setting meets the wedding band before the two shanks can.
  • A halo. GIA describes a halo as a ring of smaller accent stones around the center stone, so the head is wider than the shank by design.
  • The basket, prongs or bezel under and around the stone can overhang the side of the shank even when the stone itself doesn't.
  • Cathedral shoulders. GIA describes a cathedral setting as arches of metal that rise from the shank to support the center setting. Depending on how far the arches spread, a band either slides neatly under the stone or meets the arches and stops.
  • Split, bypass and curved shanks widen or bend near the center.
  • Mismatched profiles. A knife-edge or domed band against a flat-sided one meets at a point rather than along a face.
  • Different sizes. A band half a size looser than the engagement ring drifts on the finger, so the gap opens and closes through the day.

To see which yours is, put both rings on and look from the side, then from above: where light shows through is what a fitting quote starts from.

Is a gap a problem?

Often it isn't. A gap is a result of the setting, not a fault, and plenty of people wear one for years. Jewelers Mutual, writing about ring stacks, says it's fine if there are gaps between styles. What turns a gap into a problem is movement:

  • Rubbing. Jewelers Mutual recommends that an engagement ring and wedding band sit flush to avoid scratching, discomfort and potential damage. Rings that shift against each other grind away metal, engraving and, eventually, prongs.
  • A band that slides under the head. On a low setting, the band can ride against the basket or the prongs. A prong worn flat, or lifted just enough to catch on sweaters, should be re-tipped before a stone goes missing; see the prong repair cost guide.
  • Rings that won't stay lined up. A top-heavy engagement ring tips while the band turns at its own pace.

The fixes, from least to most work

  • Change how you wear them. When rings don't sit well together, Jewelers Mutual suggests a ring spacer, soldering them together, or wearing them on separate hands.
  • A new band shaped to fit. A band that dips around the stone or is notched where the prongs sit closes the gap from the band's side and leaves the engagement ring untouched. In a Ganoksin thread on fitted wedding bands, bench jewelers describe taking the engagement ring's profile by pressing the gently warmed ring into wax or tracing its outline, carving the wax a little at a time where the rings touch, and casting a new band from that pattern. They warn that heat-sensitive stones such as pearls have to come out first and that wax must be cleaned out of every setting afterward. Notching an existing band is a separate, case-by-case judgment made in the Custom Work quote.
  • Change the engagement ring's setting. A different head or setting can sometimes let a straight band slide underneath, but it changes the look of the ring and depends on the stone, so it's assessed only in the Custom Work quote. Lowering a high setting works the other way and can create a gap; see whether a high setting can be lowered.
  • Solder them together. Soldering joins the rings where they touch and stops them moving, but doesn't fill a gap; see should I solder my wedding rings together and how to keep rings together without soldering.
  • Leave it and keep an eye on it. If the gap doesn't bother you, have the prongs and band checked when the ring is cleaned.

How it works at JewelryRepair.com

  • Order the $10 Custom Work estimate and add photos: both rings on your hand from the side and from above, and each ring on its own. Say whether you'd like a band shaped to fit, a setting change, or advice. Nothing ships yet.
  • A jeweler reviews them and quotes the work line by line, with any trade-offs, such as how a setting change alters the look.
  • If you go ahead, send both rings together. They're photographed on arrival at the New York studio, the plan is confirmed in hand, and any change is yours to approve first. A bench jeweler does the work and a second jeweler checks it.
  • Not sure what's going on? The $19 Mail-In Evaluation examines both rings under magnification and is credited in full toward approved work.

Two cautions. If the engagement ring is under a seller's warranty or care plan, check its terms first, because outside work can void that coverage. And say which stones the rings hold: GIA warns that heat can damage emeralds and that high heat or sudden temperature changes can fracture opal.

What it costs at JewelryRepair.com

Prices from the live repair pages, Nov 18, 2026. Each repair includes a clean and polish and the 1-year workmanship guarantee.

  • Custom Work & Modifications: $10 estimate; the fitting or setting change is then quoted line by line.
  • Solder Rings Together, two rings: $62 in sterling silver, $72 in 14K yellow gold ($62 + $6 + $4), $77 in 14K white or rose gold ($62 + $11 + $4), $136 in platinum ($62 + $74).
  • Prong Re-Tipping, 1 to 4 prongs: $29 in sterling silver, $57 in 14K white gold ($29 + $23 + $5).
  • Mail-In Evaluation: $19, credited in full.

Shipping is $30 round trip per order by UPS, the same for one ring or both. $100 of coverage is included each way; covering a $3,000 set in full costs $72.50 (2.5% of the $2,900 above $100), one fee for both directions. JewelryRepair.com is the mail-in repair service of Sky Jewelry, family jewelers on Lenox Avenue with over 50,000 repairs since 1989.

Questions

Should there be a gap between an engagement ring and wedding band?
There doesn't have to be, but it's common and not a defect. A gap appears when part of the engagement ring, such as a low-set stone, a halo or the prongs, is wider than its band. It only needs fixing if the rings rub, scratch, slide out of line or bother you; Jewelers Mutual recommends rings sit flush to avoid scratching and damage.
Can a jeweler make my wedding band sit flush?
Often, yes. A jeweler can make a band shaped to follow the engagement ring, dipping around the stone and prongs, and sometimes a change to the engagement ring's setting lets a straight band slide under it. What works depends on the rings. At JewelryRepair.com both start with a $10 Custom Work estimate: send photos, and a jeweler quotes before anything ships.
Can you solder rings that have a gap between them?
Yes, where they touch, but soldering won't fill the gap. Solder joins the rings at their contact points and stops them moving against each other, so a gap at the stone stays. If the rings meet at the head and shoulders, they can be joined there in line. At JewelryRepair.com, soldering two rings is $62 in sterling silver and $72 in 14K yellow gold.
What kind of wedding band fits a low-set engagement ring?
Usually a contoured, curved or notched band, or an open one. Jewelers Mutual notes that a low-set stone sits closer to the finger and may extend slightly beyond the band, so a straight band can't reach the shank. A band that curves around the stone, or an open band, avoids that. Bring the engagement ring when you choose.
Does a gap between my rings damage them?
The gap itself doesn't; movement does. Rings that shift and rub wear away metal, engraving and eventually prongs, and a band that slides under a low setting can ride against the basket or prongs. Check the prongs regularly, since worn tips catch on sweaters. At JewelryRepair.com, re-tipping 1 to 4 prongs starts at $29 in sterling silver and is $57 in 14K white gold.