Jewelry repair questions · Rings & sizing

How can I keep my engagement ring and wedding band together without soldering them?

Use something that holds the rings without joining them: a ring guard sized to cover both shanks, sizing beads inside each ring so neither spins, a snug matching size, or a jacket or contoured band made to nest. All of it can be undone. JewelryRepair.com adds sizing beads from $40 per ring; a fitted jacket starts with a $10 estimate.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$40Ring Sizing Beads in one sterling silver ring
$62Ring Sizing Beads in one 14K yellow gold ring ($40 + $17 + $5)
$10estimate for a custom jacket, contoured band or connector
50,000+repairs since 1989 by the family behind Sky Jewelry

The short version

  • A ring guard covering both shanks holds two bands side by side with no work on either ring. It's cheap, but it shows and has to fit.
  • Sizing beads in each ring stop both from spinning, so the set stays lined up without being joined, and each ring can still be worn alone.
  • The right size fixes the most common cause: a set that turns because it's loose.
  • A ring jacket, wrap or contoured band made for your engagement ring holds it from both sides or nests against it. It's a custom piece, quoted first.
  • At JewelryRepair.com: Ring Sizing Beads from $40 per ring, Ring Resizing from $45, Custom Work from a $10 estimate.

Prices

Service PriceWhat's included
Ring Sizing Beads from $40Two small beads soldered inside the bottom of one ring's band, at roughly four and eight o'clock, so it stays upright and still passes the knuckle; they can be removed later. Per ring: $40 in silver, $62 in 14K yellow gold ($40 + $17 + $5), $67 in 14K white or rose gold ($40 + $22 + $5), $221 in platinum ($40 + $181). The page also lists a Set (2+ rings) style at +$75; if you're unsure which style fits your pair, ask for a free quote first.
Ring Resizing from $45For a set that spins because it's simply too big: sized with sizing stock matched to the ring's karat and color. One size smaller is $65 for a 14K yellow gold band ($45 + $13 + $7) and $76 for a 14K white gold engagement ring ($45 + $24 + $7). Most rings go about 2 to 3 sizes either way.
Custom Work & Modifications $10A ring jacket or wrap made for your engagement ring, a band contoured to nest against it, or a connector between the shanks. A jeweler reviews your photos and quotes the work line by line before anything ships; existing gold can be reused or credited.
Solder Rings Together from $62For comparison, the permanent route: two rings joined into one, $62 in silver, $72 in 14K yellow gold ($62 + $6 + $4), $136 in platinum ($62 + $74). Separating them later is Ring Unsoldering, from $55.

Why two rings drift apart

An engagement ring is top-heavy: its head outweighs its shank, so it tips toward the next finger while a plain band turns at its own pace. Each shift rubs one band against the other, which wears both down over time; the fixes below stop the movement without a join.

The most common culprit is fit. Jewelers Mutual, the jewelry insurer, notes that rolling often happens when a ring was sized larger to get over the knuckle. The other is shape: a straight band against a curved profile or a low-set center stone leaves a gap, and the band slides into it; see the gap between an engagement ring and wedding band.

So name the problem first. Rings that spin together point to fit; rings that separate and leave a space point to alignment.

Every option, compared

  • A ring guard over both shanks. Jewelers Mutual describes ring guards as inexpensive plastic strips that attach to the underside of a ring, and notes some people find them unattractive. Asked how to hold a band and engagement ring together without joining them, a bench jeweler on Ganoksin's Orchid forum suggested a cheap guard-type product that covers both shanks. Pros: nothing is done to either ring. Cons: it shows, makes the fit a little tighter, and must be sized to both bands' combined width.
  • Sizing beads in each ring. Two small beads inside the bottom of the band grip the underside of your finger, keep a top-heavy ring upright and still pass the knuckle. With beads in both rings, neither spins. Pros: hidden when worn, removable, and each ring can be worn alone. Cons: the rings can still drift apart slightly. Jewelers Mutual lists sizing beads among the alternatives to soldering.
  • The right size. Pros: it fixes the cause. Cons: a ring snug at the base of the finger can be hard to get over a large knuckle, which is when beads are the better choice; see ring options for arthritis or large knuckles.
  • A ring jacket or insert. Wikipedia describes an insert ring as a split, double band with a gap for a solitaire to slide into, and a wrap ring as a contoured band around the center stone; both are ring enhancers. Pros: holds the engagement ring from both sides. Cons: it's a new piece made for your exact head and band width.
  • A contoured, nesting band. Jewelers Mutual describes nested rings that fit together like puzzle pieces, mimicking the steadiness soldering gives. Cons: it usually means a new or reworked band.
  • Mechanical connectors. In the same Ganoksin thread, jewelers described a two-plate clip held by a tiny screw that needed no changes to the rings, and another participant thought a similar device, the Ever-Fit ring guard, was still made; a ball-and-socket or T-key on the shanks; and tiny magnets set into drilled holes. All but the clip modify the rings.
  • Tape. One jeweler in the thread suggested flexible bandage-type tape as a simpler alternative to the clip, which he found fussy to put on and take off.

Which fix for which problem

  • The whole set spins: that's fit. Size the rings, or bead each one if a large knuckle is why they were sized big.
  • The engagement ring tips and the band wanders: beads in each ring keep both upright and in line.
  • The band slides away and leaves a gap: a guard over both shanks, or a contoured band or jacket.
  • Three rings, engagement ring in the middle: the bands on each side steady it; a guard wide enough for three shanks, or beads in the center ring, does the rest.
  • You sometimes wear the band alone: beads or a guard, nothing that joins or hinges the rings.
  • A platinum engagement ring with a gold band: beads go into each ring in its own metal. If you're considering soldering a mixed pair, ask for a free quote through the contact page or book the $19 Mail-In Evaluation first.
  • Emeralds, opals or other heat-sensitive stones: a guard or jacket involves no heat. GIA warns that excessive heat and sudden temperature changes can fracture some gems, so if you choose beads, say which stones the ring holds and the jeweler confirms the method first.

What it costs at JewelryRepair.com

Prices from the live repair pages, Nov 18, 2026, each with a clean and polish and the 1-year workmanship guarantee:

  • Ring Sizing Beads, per ring: $40 in sterling silver, $62 in 14K yellow gold, $67 in 14K white or rose gold or 18K yellow gold ($40 + $17 + $10), $221 in platinum. The page also lists a Set (2+ rings) style at +$75; if you're not sure which style to pick for a pair, ask for a free quote before ordering.
  • Ring Resizing, one size smaller: $65 for a 14K yellow gold band ($45 + $13 + $7); $76 for a 14K white gold engagement ring ($45 + $24 + $7).
  • A jacket, wrap or contoured band: Custom Work, from a $10 estimate. To see it first, 3D Design & Rendering starts at $150, credited toward fabrication.
  • The permanent route, for comparison: Solder Rings Together from $62, or $72 in 14K yellow gold; Ring Unsoldering from $55.

Before you ship

Send both rings, even if only one gets beads, so the jeweler can see how they sit together, and say in the order notes which ring goes on first. The $30 round-trip UPS shipping is the same for one ring or three, and the prepaid label is ready in your account. Each box carries $100 of coverage each way; covering a $5,000 set in full is $122.50 (2.5% of the $4,900 above $100). Packing and coverage rules are on the shipping and insurance page.

Both rings are photographed when they reach the New York studio and again before they ship back. A bench jeweler does the work and a second jeweler checks it. JewelryRepair.com is the mail-in repair service of Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.

Questions

What's the best way to keep wedding rings together without soldering?
It depends on why they separate. If the set spins because it's loose, size it or add sizing beads; if the band drifts away from the engagement ring, a guard covering both shanks or a contoured band holds them side by side. Beads in each ring are the least visible fix and keep both upright. At JewelryRepair.com beads start at $40 per ring and resizing at $45.
Do ring guards work on two rings at once?
They can, if the guard is sized to cover both shanks. Asked how to hold a band and engagement ring together without joining them, a bench jeweler on Ganoksin's Orchid forum suggested a cheap guard-type product that covers both shanks. Expect it to show a little and to make the fit slightly tighter, since it sits inside the band. Jewelers Mutual calls guards inexpensive but notes some people find them unattractive.
Will sizing beads keep my rings together?
They keep each ring from spinning, which keeps the set lined up, but they don't join the rings. Two small beads inside each band grip your finger and hold a top-heavy engagement ring upright, and each ring can still be worn alone. At JewelryRepair.com, Ring Sizing Beads are $62 per ring in 14K yellow gold ($40 + $17 + $5) and can be removed later.
How do I keep three rings together without soldering?
Let the two bands steady the engagement ring between them, then stop the stack turning. A guard wide enough to cover all three shanks holds them side by side, and sizing beads in the center ring, or in all three, keep them upright. At JewelryRepair.com beads start at $40 per ring in silver, and a jacket made for your set starts with a $10 estimate.
Is there a clip that holds an engagement ring and wedding band together?
Possibly, though it isn't a common item. Bench jewelers on Ganoksin's Orchid forum described a two-plate clip held by a tiny screw that needed no changes to the rings, and one participant thought a similar device, the Ever-Fit ring guard, was still made. The practical choices are a ring guard covering both shanks, sizing beads, or a jacket or connector made for your rings, quoted from a $10 estimate at JewelryRepair.com.
Can I keep a platinum engagement ring and a gold band together?
Yes, without joining the two metals. Sizing beads go into each ring in its own metal, so neither spins: $221 for a platinum ring ($40 + $181) and $62 for a 14K yellow gold band at JewelryRepair.com. A guard covering both shanks needs no work at all. If you're weighing soldering instead, ask for a free quote or book the $19 Mail-In Evaluation first.