Repair questions · Engraving & appraisals

How does jewelry engraving work, and can I mail in a piece I already own?

Engraving cuts lettering or a design into the metal itself, using a machine-guided diamond stylus, a laser or a hand graver. You can mail in a piece you already own: JewelryRepair.com engraves bracelets from $35, pendants, lockets and rings from $60, and watch case backs from $70 ($85 in stainless steel), with hand engraving by quote from $250.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$35Watch & Bracelet Engraving, a sterling silver bracelet
$60Necklace & Pendant Engraving or Ring Engraving, in silver
+$50for a custom image or font
50,000+repairs since 1989 by Sky Jewelry's family of jewelers

The short version

  • Engraving marks lettering or a design into the surface of the metal. What changes is the tool: a diamond guided by a machine, a laser beam, or a steel graver pushed by hand.
  • You can engrave what you already own. Pendants, bar necklaces, dog tags, lockets, bracelets, bangle interiors, clasps, watch case backs and rings are all listed services here, by mail.
  • The surface sets the layout. Letter height and how many characters fit depend on the size and curve of the area. If your inscription won't fit legibly, you're contacted before anything is cut.
  • Prices start at $35 for a bracelet, $60 for a pendant or ring and $70 for a watch case back ($85 in stainless steel); a custom image or font adds $50.
  • Chains and plated pieces need a check before you book.

Prices

Service PriceWhat's included
Necklace & Pendant Engraving from $60Pendants, bar necklaces, dog tags and lockets, machine-engraved in script or block lettering.
Watch & Bracelet Engraving from $35Bracelets, bangle interiors and clasps from $35; a watch case back adds $35.
Ring Engraving from $60Inside or outside the band, including tungsten and titanium; gold-plated and fashion rings +$32.
Hand Engraving from $250Graver-cut lettering or ornament, and re-cutting worn antique engraving, by free quote.
Engraving Removal from $40An old inscription taken out and the surface refinished to match.

Machine, laser or hand: which method this is

Metal can be engraved by machine, by laser or by hand with a graver; the three are compared side by side in laser vs machine vs hand engraving. Wikipedia's engraving article notes that in most commercial markets hand engraving has given way to computer-controlled machines, that the small engravers in retail jewelry and award stores use a single interchangeable diamond head, and that in diamond drag, the most common method, the diamond is pushed into the surface and dragged along to scratch a fine, even line. Inscriptions at JewelryRepair.com are machine-engraved in script or block lettering, guided for consistent depth and spacing, and ring inscriptions are cut with a diamond stylus. Laser engraving isn't offered here, and graver-cut Hand Engraving starts at $250 by free quote.

How a mail-in engraving order works

  • You type the inscription on the repair page at checkout, choose script or block lettering, and say where it goes: inside or outside a band, the front or back of a pendant, a case back, a bangle's inner face.
  • The engraver lays it out on the real surface. A slim bar pendant takes a different letter height and spacing than a round locket back, curved surfaces and dog tags each need their own setup at the machine, and case backs are rarely perfect circles, so the text is centered on the area that can actually be engraved.
  • If it won't fit legibly, you hear first. Nothing is cut until the layout works on your piece.
  • It's cut at an even depth: deep enough to stay readable through years of polishing and wear, and shallow enough to leave the piece's strength alone.
  • It's proofed and photographed. Your piece is photographed when it arrives and again before it ships back. The layout is checked on your piece before cutting, a second jeweler at Sky Jewelry's New York studio proofs the finished inscription against your order, and the work is covered by the 1-year workmanship guarantee.

What you can engrave by mail, and what needs a check first

  • Pendants and necklaces: pendant fronts and backs, bar necklaces, dog tags and lockets, under Necklace & Pendant Engraving.
  • Bracelets and watches: bracelets, bangle interiors, bracelet clasps and watch case backs, under Watch & Bracelet Engraving. See engraving the back of a watch.
  • Rings: inside or outside the band, including tungsten and titanium, under Ring Engraving. See getting a ring engraved.
  • Chains. A chain's links aren't a listed engraving surface, so chain engraving starts with a free quote through the on-site chat or the contact page. If what you want is a name or date on a necklace, a bar, tag or pendant hanging from the chain is a listed surface.
  • Gold-plated and fashion pieces. Only Ring Engraving lists a gold-plated option (+$32). Plating is thin: the FTC's Jewelry Guides set 0.175 microns of fine gold as the minimum for gold electroplate and 2.5 microns for heavy gold electroplate, so an engraved cut can go through the plating and show the base metal inside the letters. For a plated pendant or bracelet, ask for a free quote first.

Engraving a necklace or pendant: front, back or inside

Necklace and pendant engraving is where most mail-in orders need the clearest instructions, because the same piece can often take text in more than one place. The order form has a location field; use it.

  • Bar necklaces. The text runs along the bar, and letter height is set by the bar's width, so a long line on a slim bar means small letters. Coordinates, a name or a date fit best.
  • Dog tags. A flat, open surface that takes several short lines; dog tags get their own setup at the machine.
  • Lockets. Say whether you want the outside front, the outside back or the inside. A name inside a locket is one of the listed uses, and an inscription on the back stays out of sight against the chest.
  • Pendants set with stones or with a textured front. Engraving needs smooth metal, so the plain back is usually the place. If you're not sure your piece has room, describe it in the order notes; if the text won't fit legibly, you're contacted before anything is cut.
  • Engraving at a store versus by mail. Many jewelry and award stores have their own engraving machines, as noted above. By mail you can send a piece you already own from anywhere in the US, the layout is fitted to your actual piece rather than a template, and the trade-off is time: about three weeks door to door.

What it costs at JewelryRepair.com

Each engraving service is priced live by metal, with a karat charge for gold. A few totals:

  • Sterling silver pendant, bar or dog tag: $60. In 14K yellow gold: $68 ($60 + $6 + $2). In 14K white gold: $70 ($60 + $8 + $2). In stainless steel: $75 ($60 + $15).
  • Sterling silver bracelet or bangle: $35. In 14K yellow gold: $43 ($35 + $6 + $2).
  • Stainless steel watch case back: $85 ($35 + $35 + $15). An 18K yellow gold case back: $82 ($35 + $35 + $6 + $6).
  • Ring in 14K yellow gold: $68 ($60 + $6 + $2). In platinum: $113 ($60 + $53). A gold-plated or fashion ring: $92 ($60 + $32).
  • A custom image or font adds $50, so a silver pendant with a custom image is $110 ($60 + $50). Removing an existing engraving first adds $21.
  • Graver-cut work is quoted free from $250, with ornamental work +$50 and black antiquing +$50.

Rush Service (+$50) ships an eligible order back 2 to 3 days sooner. Shipping is $30 round trip per order, however many pieces share the box, so engraving a pair of pendants or a set of bracelets costs one shipping fee.

Before you order: getting the inscription right

  • Proofread exactly what you type. The inscription is cut as entered, and because engraving removes metal, a mistake can only be undone by removing it. Engraving Removal, from $40, cuts the surrounding surface down past the deepest point of the lettering and refinishes it to match.
  • Fewer characters, larger letters. A ring band or a slim bar holds a short line at a readable size; initials and a date read more clearly than a long sentence.
  • Think about wear. Engraving on the outside of a ring or the face of a pendant meets daily contact, and every polish takes a little metal off around it, so outside inscriptions soften faster than inside ones.
  • Plan around other repairs. Resizing cuts the band at the bottom, which can interrupt an inscription there; see whether an engraved ring can be resized. Wording ideas are in what to engrave on a wedding ring.

Questions

How long does jewelry engraving take?
By mail, about three weeks door to door; the engraving itself takes minutes. Wikipedia notes a simple item can be machine-engraved in under ten minutes, and the promised-by date on each engraving page includes the bench queue and UPS transit both ways. Rush Service, $50, ships an eligible order back 2 to 3 days sooner.
Can you engrave a necklace chain?
Not as a listed service. Chain links aren't one of the engraving surfaces priced here, so chain engraving starts with a free quote through the on-site chat or contact page. If you want a name or a date on a necklace, a pendant, bar, dog tag or locket on the chain is engraved under Necklace & Pendant Engraving, from $60 in silver.
Can gold-plated jewelry be engraved?
Sometimes, but the plating is the limit. Under the FTC's Jewelry Guides, a piece sold as gold electroplate needs only 0.175 microns of fine gold, so an engraved line can cut through to the base metal and show a different color inside the letters. Ring Engraving lists a gold-plated or fashion option, a $32 charge on the $60 base. A plated pendant or bracelet starts with a free quote instead.
Is engraving permanent?
Yes, it's cut into the metal, but it isn't immune to wear. Each polish takes a little metal off the surface, and outside inscriptions meet more knocks than those inside a band, so shallow lettering softens over the decades. Worn engraving can be re-cut by hand with Hand Engraving, from $250 by quote, and engraving you no longer want can be removed, from $40.
Can I get a drawing or handwriting engraved?
Yes, as a custom image, which adds $50 to the engraving price: a sterling silver pendant with a custom image is $110 ($60 + $50). The design has to work at jewelry scale, and if it won't fit legibly on your piece you're contacted before anything is cut. For ornamental or traditional script work cut by hand, Hand Engraving starts at $250 by free quote.