Jewelry repair questions · Watches

Why doesn't my watch glow in the dark anymore, and can the lume be redone?

Usually it isn't getting enough light: modern lume stores light and fades within hours. Older tritium or radium lume has run down, and only a relume, which means opening the watch, brings the glow back. Relume isn't on the JewelryRepair.com price list, so the first step is the $19 Mail-In Evaluation, credited in full, which says what can be done.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

12.33 yearshalf-life of tritium, the glow source in self-powered watch lume before modern pigments
3 to 5 hoursof glow from a 10-minute charge above 500 lux, Seiko's published figure for its Lumibrite
$19Mail-In Evaluation, credited in full; relume isn't on the price list
50,000+repairs since 1989 by Sky Jewelry's family of jewelers

The short version

  • Modern lume stores light. Strontium aluminate pigments such as Super-LumiNova and Lumibrite charge in light and fade over a few hours, so a watch kept under a sleeve or in a drawer starts the night nearly empty.
  • Older lume runs down for good. Tritium paint halves its activity every 12.33 years, and radium paint's phosphor has broken down.
  • A relume means opening the watch and replacing original lume by hand.
  • Never open a radium watch.
  • At JewelryRepair.com, relume isn't on the price list, so the first step is the $19 Mail-In Evaluation, credited in full.

Prices

Service PriceWhat's included
Mail-In Evaluation $19The first step for a dial or hands that no longer glow: a jeweler examines the watch under magnification and sends photos and an itemized quote saying what the bench can and can't do for your dial and hands. Approve all, some or none; credited in full toward approved work.
Watch Overhaul from $295 mechanical
from $195 quartz
If the watch is due a service anyway: the movement comes out of the case for disassembly, cleaning, lubrication, regulation and reseal. It doesn't include lume work; for the dial and hands, start with the Mail-In Evaluation. Can't be rushed.

First, find out what kind of lume you have

  • Light-charged pigment (most watches made since the late 1990s). Wikipedia describes Super-LumiNova as strontium aluminate pigment that is non-radioactive and nontoxic, based on LumiNova pigments invented in 1993 as a safe replacement for radium-based paint. Light excites the pigment and it gives the energy back as a glow.
  • Tritium paint (roughly the 1960s to the late 1990s). Self-powered: tritium's radiation makes a phosphor glow without any charging. Wikipedia's Super-LumiNova article says tritium was used on almost all Swiss watches from 1960 to 1998. It fades whatever you do.
  • Radium paint (early 1900s to about 1970). Radium mixed with luminous zinc sulfide. The EPA says radium was no longer used on watch and clock dials by the 1970s.
  • Tritium gas tubes. Some watches carry tiny sealed glass tubes of tritium gas instead of paint. Luminox says its tubes are self-powered, need no light to charge, keep a constant glow for the first ten years and stay visible for up to 25 years; Wikipedia puts the useful life of the average tube at 10 to 20 years.

The age of the watch is the best clue. If you aren't sure, the evaluation can tell you; if there's any chance the dial is radium, leave the case closed.

Why a modern watch stops glowing

  • It isn't charged. Seiko says Lumibrite exposed to more than 500 lux for about 10 minutes glows for 3 to 5 hours, fading gradually. Its reference table puts an average room, 3 meters from a 40-watt daylight fluorescent lamp, at only about 500 lux, the threshold rather than above it. A watch under a cuff all evening, or in a dim room, starts the night nearly empty.
  • The light is the wrong kind. Wikipedia gives strontium aluminate's excitation range as about 200 to 450 nanometers, ultraviolet through violet and blue, so daylight and bright white light charge it best.
  • Your eyes haven't adjusted. Seiko notes that moving from a bright place to a dark one takes the eyes time to adapt, so a dial can look dark for the first moments even when it's glowing.
  • It's damaged. Lume can crack, flake off the hands or markers, or be spoiled by moisture; the Super-LumiNova article names prolonged contact with water or high humidity as the main long-term risk. Fog or droplets under the crystal are urgent: see why a watch fogs up inside.

A quick test: leave the dial in daylight or under a bright white lamp for 10 minutes, go into a dark room and give your eyes a minute. A modern dial that is still dark, or glows only in patches, has a lume problem rather than a charging problem.

Why old dials go dark, and stay dark

Self-powered lume needs no charging, but it runs down on its own clock, and no amount of light brings it back:

  • Tritium halves every 12.33 years. That's the rate Wikipedia gives for tritium's beta emissions. A dial painted in 1985 has been through about 3.3 half-lives by 2026 (41 ÷ 12.33), leaving roughly a tenth of its original activity (0.5 multiplied by itself 3.3 times is about 0.1).
  • Radium dials lose their glow, not their radioactivity. Radium-226 has a half-life of about 1,600 years. Wikipedia explains that the light fades because the crystal structure of the luminous zinc sulfide breaks down, so a dark radium dial is still radioactive.

So a tritium or radium watch that doesn't glow isn't faulty: it's old. The only way to make it glow again is new lume, and that's a decision about originality as much as repair.

What a relume involves, and what to weigh first

  • Opening the watch. The case is opened, the hands come off and the dial usually comes out, so the seals have to be restored and the case checked afterward.
  • New compound by hand. Fresh luminous compound is applied to each marker and hand under magnification, matched so dial and hands glow and look alike, then the hands are refitted and the case sealed.

Before anyone starts:

  • Originality. A relume replaces original material that can't be put back. On a collectible watch, decide whether glow or originality matters more to you.
  • Radium. The EPA says not to take radium watches apart; Wikipedia's radium dial article, citing the agency, warns that flaking paint can be inhaled or swallowed. That is specialist work, not general repair.
  • Tritium tubes aren't relumed with paint; a dimming tube is a question for the watch's maker.
  • Warranty. If the watch is under its maker's warranty or a service plan, check with the maker first, because outside service can void it.

Can I relume a watch myself?

Kits exist, but it's one of the riskier home jobs:

  • The hands have to come off and go back on without bending them or marking the dial.
  • Every speck of dust or lint that gets in while the case is open ends up under the crystal, where you'll see it every day.
  • Opening the case disturbs its seals, and a watch closed at home without a pressure check should be treated as no longer water resistant.
  • A dial from before about 1970 may be radium. Don't open it, and don't scrape it.

On an inexpensive watch you're happy to experiment with, a careful hobbyist can try. On anything valuable or sentimental, don't.

What it costs at JewelryRepair.com

Prices from the live repair pages, Nov 18, 2026. Relume, dial refinishing and dial replacement aren't on the JewelryRepair.com price list, so this page doesn't promise them.

  • Start here: the Mail-In Evaluation, $19, credited in full toward approved work. A jeweler examines the watch under magnification and sends photos with an itemized quote saying what the bench can and can't do for your dial and hands; approve all, some or none.
  • Due a service anyway: Watch Overhaul, $195 for quartz and $295 for mechanical ($195 + $100) with most brands; Omega $210 / $310. It services the movement only and doesn't include lume work.
  • Only the outside needs attention: Watch Cleaning & Detail, $185 for most brands, keeps the case back sealed, so it never touches the dial or the lume.

Shipping is $30 round trip per order by UPS with $100 of coverage each way; full-value cover for a $3,000 watch is $72.50 for both directions (2.5% of the $2,900 above $100). JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by any watch or pigment brand named here. It's run by Sky Jewelry, family jewelers on Lenox Avenue since 1989. The New York studio has completed over 50,000 repairs since 1989.

Questions

How do I make my watch glow again?
Charge it first. Modern lume stores light: Seiko says its Lumibrite glows for 3 to 5 hours after about 10 minutes above 500 lux, so put the dial in daylight or under a bright white lamp. If it still won't glow, the lume has aged or been damaged, and only a relume brings it back. Relume isn't on JewelryRepair.com's price list; its $19 Mail-In Evaluation says what can be done.
How long does watch lume last?
It depends on the type. Modern strontium aluminate lume doesn't wear out from charging; Wikipedia says it theoretically keeps its afterglow properties indefinitely, though water and humidity can spoil it. Self-powered lume runs down: tritium paint halves its activity every 12.33 years, and tritium gas tubes last roughly 10 to 25 years by Wikipedia's and Luminox's figures. Radium dials stopped glowing long ago.
Is the glow paint on my old watch radioactive?
It may be. Radium paint was used on watch dials from the early 1900s until about 1970, and radioactive tritium paint was common after that until the late 1990s. The EPA says intact radioactive antiques are usually not a health risk, but radium watches shouldn't be taken apart. Don't scrape or open an old dial; a dark radium dial is still radioactive.
Does a relume lower a vintage watch's value?
It can, because it changes what the watch is. A relume replaces original lume that can't be put back, so a watch valued for its untouched condition stops being untouched. If originality matters to you, or might matter to a future owner, decide before anyone starts. At JewelryRepair.com the $19 Mail-In Evaluation gives you photos and options first, with nothing done until you approve it.
How much does it cost to relume a watch?
There's no set price at JewelryRepair.com, because relume isn't on the price list. The $19 Mail-In Evaluation, credited in full, is the first step: a jeweler examines the watch and sends photos and an itemized quote saying what can and can't be done. A Watch Overhaul ($195 quartz, $295 mechanical, most brands) services the movement only, not the lume.
Why does my watch only glow for a few minutes?
Usually because it was barely charged, or the lume is thin or damaged. Seiko's Lumibrite glows 3 to 5 hours after 10 minutes above 500 lux, but an average room 3 meters from a fluorescent lamp is only about 500 lux, so daylight or a lamp closer than that charges it better. If a full daylight charge still fades within minutes, the lume may need redoing.