Jewelry repair questions · Watches

Why won't my watch date change, and why are the hands loose?

Check the setting first: a stuck date is frequently a setting problem, such as time set 12 hours off, a watch that stopped before midnight, or a date changed during the maker's no-set hours. Loose or slipping hands usually follow a knock and need the case opened. JewelryRepair.com quotes the fix first: a $19 evaluation, overhauls from $195.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$19Mail-In Evaluation for a stuck date or loose hand, credited in full toward the repair
12 hourshow far off the time is when the date changes at noon
$195 / $295Watch Overhaul, quartz / mechanical, most brands
50,000+repairs since 1989, family jewelers on Lenox Avenue

The short version

  • Date changes at noon? The time is set 12 hours off. Seiko's fix: advance the hands by 12 hours.
  • Date didn't change overnight? Check whether the watch stopped before midnight. An automatic that ran down, or a quartz watch with a dying battery, never reaches the change. Wind or check it, set it, and watch it through one midnight.
  • Shows 31 on the first of the month? That's normal: a simple date needs correcting after February and 30-day months.
  • Date sticks halfway, skips or jumps two days on a watch that runs and is set right: calendar parts need looking at.
  • A hand is loose, misaligned or has fallen off: stop wearing the watch, keep it dial-up and have it opened. A loose hand can scratch the dial or catch the others.
  • Still under the maker's warranty? Go to the maker first, because outside service can void it.

Prices

Service PriceWhat's included
Mail-In Evaluation $19For a date that sticks, skips or won't advance, or a hand that's loose, misaligned or has fallen off: the watch examined and photographed, with an itemized quote before any work. Credited in full toward the repair.
Watch Overhaul from $195 quartz
from $295 mechanical
When the date or hands fail because the movement is dirty, dry or worn: disassembly, ultrasonic cleaning, inspection under magnification, fresh oils at each point, regulation and reseal. Worn parts are flagged for your approval first. Can't be rushed. Under the maker's warranty? Go to the maker first.
Stem & Crown Replacement from $75When the crown spins, won't click into the date position or won't set anything: a new stem cut to the length your case requires, a matched crown with a fresh gasket where the design calls for one, and winding, setting and the date tested. TAG Heuer $195, Rolex $275.
Watch Battery & Pressure Check from $30When a quartz watch's hands stalled on a weak cell and the date never reached midnight: a fresh cell of the size the movement specifies, contacts and movement inspected, gasket checked and the case pressure-checked.

Why the date won't change

A date display is advanced by the movement once every 24 hours. Seiko's troubleshooting page for its 4R automatic movements names a common surprise: if the date changes at 12 o'clock noon, AM and PM aren't properly set. Work through these in order:

  • The time is 12 hours off. Advance the hands a full 12 hours and the date will change at midnight again.
  • The watch stopped. An automatic that wasn't worn enough runs down, and Seiko's first answer to a stopped 4R watch is that the mainspring hasn't been wound. A quartz watch with a weak battery may stall. If the hands weren't moving at midnight, the date didn't move either; see why did my watch stop working?
  • It was set in the no-set window. Seiko's date-setting instructions for its 4R calibers say not to set the date between 9:00 p.m. and 1:00 a.m., because it may fail to change the next day, and that doing so may cause damage; windows differ by movement, and when not to change the date on a watch covers setting it safely.
  • It's the end of a short month. A simple date counts to 31 every month, and Seiko notes it is necessary to adjust the date at the end of February and 30-day months. Annual and perpetual calendars are complications built to handle this; an ordinary date isn't.
  • The crown isn't in the date position. On Seiko's 4R35 the date is set with the crown pulled to the first click and turned counterclockwise, and a screw-down crown has to be unscrewed first. If the crown spins without clicking into its positions, or never moves the date, the stem may be broken or disengaged; see watch crown or stem broken?
  • The date sticks halfway or skips. When the window shows half of two numbers, or the date jumps two days or not at all on a watch that runs and is set correctly, part of the calendar mechanism is worn, dirty or damaged, for example after a date set during the no-set window or a hard knock. That needs the case opened.

Why hands come loose

The hands sit on a stack of thin tubes at the center of the dial. In a watch's motion work, as Wikipedia describes it, the center wheel drives the cannon pinion through a friction coupling; the minute hand rides on that hollow shaft, and the hour hand on the hour wheel fitted over it. The hands are pressed onto those tubes, and friction is what holds the whole stack, which is why a knock matters:

  • A hand that flops or points the wrong way after a drop has slipped on its tube. Longines notes that shocks can block gears or damage components.
  • The seconds hand runs but the time falls behind: that friction coupling may be slipping, so the minute and hour hands aren't carried round with the movement.
  • The watch stops at the same time each day: hands catching on each other, on the dial or on the crystal can stall the movement.
  • The date changes at an odd hour even though AM and PM are right: the hour hand may have been knocked or refitted out of line with the wheel that drives the date.
  • A hand has fallen off and rattles under the crystal. Stop wearing the watch, keep it dial-up, and don't keep winding or setting it.

A chronograph hand that won't return to zero is a different problem; see why won't my chronograph hand reset to zero?

How a watchmaker fixes it, and how we quote it

If the checks above don't fix it, don't open the case or tap the watch to shift a hand back; both problems live inside the case. To reach the hands or the calendar parts, a watchmaker usually takes the movement out of the case and the hands and dial off the movement. A loose hand is refitted in line with the others, or replaced if it's bent; worn or damaged calendar parts are cleaned or replaced, where parts for that movement exist.

At JewelryRepair.com we don't promise a fix before seeing the watch. A loose hand or a stuck date isn't a single menu item, so it starts with a quote:

  • Free quote first: describe the problem through the on-site chat or the contact page, and a jeweler replies with an itemized quote within 1 business day, before anything ships.
  • Or the Mail-In Evaluation, $19: the watch is examined and photographed and you get an itemized quote, with the $19 credited in full toward the work you approve.
  • If the watch has stopped, book it through Start a Repair: a watch that stops gets a free diagnosis first.
  • If the movement is dirty, dry or worn, the repair is the Watch Overhaul, with worn parts flagged for your approval before anything proceeds.
  • If the crown or stem is at fault, Stem & Crown Replacement tests winding, setting and the date before the case is closed.

Any part to replace, such as a hand or a date wheel, is photographed and quoted for your approval first; we don't promise factory parts. If you decline, the watch comes back with nothing more to pay, because the round-trip shipping covers the return.

What it costs at JewelryRepair.com

Each price includes a clean and polish and the 1-year workmanship guarantee:

  • Mail-In Evaluation: $19, credited in full; with $30 round-trip shipping, $49 to have the watch examined and quoted.
  • Watch Overhaul, most brands: $195 for quartz and $295 for mechanical ($195 + $100). Omega $210 / $310, Longines $215 / $315, Rolex $395 / $495. Overhauls can't be rushed and take longer than the roughly three weeks most repairs take.
  • Stem & Crown Replacement: $75 for most brands, TAG Heuer $195 ($75 + $120), Rolex $275 ($75 + $200).
  • Watch Battery & Pressure Check: $30 for most brands, Omega $45, Rolex $230.

JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by Seiko, Longines, Omega, TAG Heuer, Rolex or any other watch brand; brand names identify makers' published guidance and the watches customers send. If your watch is still under the maker's warranty or a service plan, check with the maker first, because outside service can void it. Every brand's prices are under watch repair by brand.

Before you ship

  • If a hand has come off, keep the watch dial-up and pad it so it can't be shaken around in transit.
  • Push the crown fully home, screwing it down if it's that type, and don't set the date again before it ships.
  • On the order, note when the date actually changes (noon, midnight, another hour or never), whether the watch is running, and what happened before the problem started.
  • Pack it in any sturdy small box with nothing on the outside naming the contents, and drop it at any UPS location with the prepaid label from your account. Shipping is $30 round trip per order with $100 of coverage each way and a signature both ways, US addresses only; full value up to $10,000 is 2.5% of the value above $100 for both directions, so $17.50 for an $800 watch ($700 × 2.5%).

Your watch is photographed when it reaches the New York studio and again before it ships back. Sky Jewelry, family jewelers on Lenox Avenue, runs JewelryRepair.com and has completed over 50,000 repairs since 1989.

Questions

Why does my watch date skip or jump two days?
Usually because part of the calendar mechanism is worn, dirty or damaged, often after a knock or a date set during the no-set hours. First rule out a setting slip: check that AM and PM are right and that the watch runs through midnight. If it still skips, the case has to be opened. JewelryRepair.com quotes it after the $19 Mail-In Evaluation, credited in full, and a dirty movement is a Watch Overhaul, from $195.
Why won't my quartz watch date change?
Most often because the watch slowed or stopped before midnight on a weak battery, or the time is 12 hours off. Check that the seconds hand is moving and that the date changes at midnight rather than noon. If the watch runs and the date still won't move, the crown, stem or calendar parts need checking. A Watch Battery & Pressure Check at JewelryRepair.com is $30 for most brands.
Why is my watch date stuck halfway?
It usually means part of the calendar mechanism is worn, dirty or damaged, so the date can't finish its jump. It can follow a date change made during the no-set hours, or a knock. First rule out a watch that simply stopped mid-change; if it runs and still sticks, the case has to be opened. JewelryRepair.com quotes it after a $19 Mail-In Evaluation, credited in full.
What should I do if a hand falls off my watch?
Stop wearing it, keep it dial-up and don't keep winding or setting it. A loose hand under the crystal can scratch the dial or catch the other hands. Don't open the case yourself: the hand has to be refitted in line with the others, usually with the movement out of the case. JewelryRepair.com quotes it free through the contact page, or after a $19 evaluation.
How much does it cost to fix a watch date?
It depends on the cause. A setting problem costs nothing to put right. A crown or stem fault is Stem & Crown Replacement at JewelryRepair.com, $75 for most brands, and a dirty or worn movement needs a Watch Overhaul, $195 for quartz or $295 for mechanical with most brands. A broken calendar part is quoted after the $19 Mail-In Evaluation, credited in full.
Can I fix a loose watch hand myself?
It isn't worth the risk. Refitting a hand means opening the case, lifting the hand off a tiny tube and pressing it back on in line with the others without marking the dial. A slip bends the hand or scratches the dial, and an opened case needs resealing to keep water out. Send it to a watchmaker; JewelryRepair.com quotes it before any work.