Mail-in watch repair · Ball

Ball watch repair and service, by mail

JewelryRepair.com services Ball watches by mail at Sky Jewelry's New York studio: a full overhaul of a mechanical Ball is $295 and a documented water-resistance pressure test is $175, with every price set before anything ships. Shipping is $30 round trip with a prepaid UPS label, and the work comes from family jewelers with over 50,000 repairs since 1989.

$295mechanical overhaul
$175documented pressure test
$75crystal, or stem & crown
1 yearworkmanship guarantee

4.9 from 187 Google reviews (as of ) · Over 50,000 repairs since 1989

Prices

Service PriceWhat's included
Watch Overhaul $295 mechanical
$195 quartz
Ball's mechanical watches use the $295 mechanical price: movement taken apart, cleaned, lubricated, regulated and resealed. A vintage railroad watch starts with the Mail-In Evaluation.
Water-Resistance Pressure Test $175Documented pressure-chamber test against the depth rating on your Ball. Resealing is quoted if it fails.
Stem & Crown Replacement $75New stem and/or crown with a gasket; winding, setting and date tested.
Watch Crystal Replacement $75Cracked or scratched crystal replaced and the case resealed.
Watch Band & Strap Repair $95 metal
$45 rubber
$120 leather
Pins, collars, links and clasps on bracelets; stitching on leather straps. A replacement is quoted if the band can't be saved.
Link Removal & Addition $19 one link
$29 two or more
Bracelet sized to your wrist. Removed links come back with the watch.
Watch Cleaning & Detail $185Exterior clean and detail of the case and bracelet. The case back stays sealed.
Watch Appraisal $115Written insurance-replacement-value appraisal with photographs.
Mail-In Evaluation $19For a vintage Ball railroad watch, or if you're not sure what's wrong or there's more than one problem: a jeweler examines the watch and sends an itemized quote with photos. Credited in full toward approved work.

What Ball service involves

A railroad standard, now made in Switzerland. Webb C. Ball founded the company in Cleveland in 1891 and set the RR Standard for American railroad watches after a collision at Kipton, Ohio, that year; it allowed a gain or loss of no more than 30 seconds a week. Ball is now based in La Chaux-de-Fonds and produced 5,031 COSC chronometers in 2015.

  • Ball makes mechanical watches. Wikipedia describes its products as Swiss-made mechanical watches, so they take no battery and there's no battery service on this page. If your Ball stopped after sitting unworn, it has probably just run down: wear an automatic for a while, or wind a hand-wound watch at the crown, before booking anything.
  • A vintage Ball railroad watch doesn't fit a fixed-price order. Start with the Mail-In Evaluation ($19, credited in full): a jeweler examines it and sends an itemized quote with photos before any work.
  • Running fast, slow or stopping while worn: that's a Watch Overhaul ($295). The movement is taken apart, cleaned, lubricated, regulated and resealed. It brings the watch back to good timekeeping, but it doesn't issue a new chronometer certificate.
  • A crown that won't wind, set or seal: Stem & Crown Replacement ($75), with a new gasket. Pair it with the Water-Resistance Pressure Test ($175) if you wear the watch in water.

Ball's tritium gas tubes: what fades and what to do

Ball lights its dials with self-powered micro gas lights, which it calls 3H: tritium gas sealed in a mineral glass tube coated with luminescent material. Ball says they need no charging from light or any other power source and glow for up to 25 years. Ball's own manual adds that the brightness gradually declines over time and can be restored by replacing the dial.

  • A dim dial isn't a movement fault. The tritium ages on its own schedule, so an overhaul or a pressure test won't brighten it.
  • Dial replacement isn't a service on our menu, so we won't promise it. Ask Ball about it.
  • Glow is fine but something else is wrong, or you can't tell what: the Mail-In Evaluation ($19, credited in full toward the repair) gets you an itemized answer with photos before any work. If you decline, the watch comes home with nothing more to pay.

Before you ship your Ball

  • Insure the full value. $100 of UPS coverage is included each way. For a Ball you value at $2,000, full-value coverage is 2.5% x ($2,000 - $100) = 2.5% x $1,900 = $47.50, one fee covering both directions, up to $10,000 per package.
  • Plain box, nothing on the outside. Use a sturdy small box rather than the Ball presentation box, and wrap the watch so it can't shift. Nothing on the box or the label names the contents.
  • Drop it at any UPS location. Your prepaid label is waiting in your account minutes after checkout. Coverage runs from UPS's first scan until the package is signed for, and UPS needs a signature at our studio and at your door. US addresses only.
  • Photographed on arrival. Your watch is photographed before any work and again before it ships back, and the photos appear in your account.

A bench jeweler at Sky Jewelry's New York studio, 354 Lenox Avenue (Malcolm X Blvd), New York, NY 10027, does the work and a second jeweler checks it, backed by our 1-year workmanship guarantee. JewelryRepair.com is run by family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989. More on coverage: shipping and insurance. Questions before you book: (212) 597-2899.

Before you ship

  1. Choose your service Pick the repair, choose "Most brands" in the brand menu (Ball carries no brand charge) and select Mechanical as the movement type. The full price and your promised-by date show before checkout.
  2. Ship it in a plain box Leave the Ball presentation box at home. Tape the prepaid UPS label from your account to a plain, sturdy box and drop it at any UPS location; one $30 round trip covers the order.
  3. Photographed, serviced, checked Your Ball is photographed on arrival, before the case is opened. A bench jeweler does the work, a second jeweler checks it, and anything beyond your order waits for your approval.
  4. Signed for at your door Photographed again before it leaves, it ships back by UPS with a signature required and our 1-year workmanship guarantee from delivery.
Independent service. JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by BALL Watch Company. If your watch is still under the maker's warranty, send it to the maker first, because outside service can void it.

Questions

How much does a Ball watch service cost?
A full overhaul of a mechanical Ball is $295, plus $30 round-trip UPS shipping, and Ball carries no brand charge here. The movement is taken apart, cleaned, lubricated, regulated and resealed, with a 1-year workmanship guarantee. It restores good timekeeping, but it doesn't issue a new COSC chronometer certificate and it doesn't brighten the tritium tubes. A vintage Ball railroad watch starts with the $19 Mail-In Evaluation instead.
Does a Ball watch need a battery?
No. Ball's watches are mechanical, and its tritium tubes glow without any battery. If your Ball stops while you wear it every day, or keeps poor time, the fix is an overhaul ($295), not a battery. If it stopped after sitting in a drawer, it has probably just run down: wear an automatic for a while, or wind a hand-wound one at the crown. A vintage Ball railroad watch starts with the $19 Mail-In Evaluation.
Can you replace the tritium tubes on my Ball watch?
Not as a listed service. Ball's manual says fading tubes are restored by replacing the dial, and dial replacement isn't on our menu, so ask Ball about it. The tubes need no light or battery and Ball rates them for up to 25 years, so a dimmer glow is aging gas, not a movement fault, and an overhaul won't brighten it. For anything else wrong with the watch, the $19 Mail-In Evaluation gets you an itemized quote with photos.
How do I know if my Ball is still water-resistant?
Only a pressure test can tell you, because gaskets age after the watch leaves the factory. Our Water-Resistance Pressure Test ($175) checks the case in a pressure chamber against the depth rating on your Ball and documents the result; if it fails, resealing is quoted before any work. Book it whenever the case has been opened, or if you swim or dive with the watch.
Can you repair or replace my Ball watch strap or bracelet?
We repair them, and quote a replacement if a band can't be saved: Watch Band & Strap Repair is $95 for a metal bracelet, $45 for rubber and $120 for leather, covering pins, collars, links, clasps and stitching. Nothing beyond what you approve is charged. To size a Ball bracelet, Link Removal & Addition is $19 for one link or $29 for two or more, and the removed links come back with the watch.