Mail-in jewelry repair · Kirk Kara

Kirk Kara ring repair and resizing, by mail

JewelryRepair.com repairs Kirk Kara rings by mail, hand engraving included: worn engraving is re-cut by hand where enough metal remains, from $250 on a quote set from your photos. Shipping is $30 round trip. JewelryRepair.com is run by Sky Jewelry in New York, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.

$250worn hand engraving re-cut, from (quoted from photos)
$19evaluation before sizing an engraved or filigree shank, credited in full
$125platinum ring polished, milgrain edges by hand
50,000+repairs since 1989

4.9 from 187 Google reviews (as of ) · Over 50,000 repairs since 1989

Prices

Service PriceWhat's included
Prong Re-Tipping from $29Kirk Kara holds each diamond with four solid prongs; when their tips wear flat, new metal is laser-welded on and shaped back over the stone: up to four prongs is $224 in platinum, $65 in 18k white gold, $61 in 18k yellow gold. Five to nine prongs add $45.
Stone Tightening from $50The small peek-a-boo diamonds on the sides of a Kirk Kara head tested for movement under 10x magnification and the loose ones secured, up to eight stones per order: $85 in platinum, $60 in white gold, $55 in yellow gold.
Diamond Setting from $5A missing peek-a-boo or side diamond measured and matched to the stones beside it, then set after you approve the stone and its price. Setting labor for one prong-set side diamond is $178 in platinum, $57 in 14k white gold.
Hand Engraving from $250Graver-cut work done by hand, including re-cutting engraving that wear has softened, where enough metal remains. Quote-only: a jeweler reviews your photos and sets the exact price before anything ships.
Rhodium Plating from $69All-white gold Kirk Kara rings polished to an even surface, deep-cleaned and re-plated with fresh rhodium: $79 for 14k white gold, $83 for 18k. Two-tone rings are evaluated first; all-rose or all-yellow rings are polished instead.
Jewelry Polishing from $30Worked through progressively finer compounds back to the original finish, with milgrain edges and recesses done by hand where a wheel would blur them: $125 for a platinum ring, $63 for 18k yellow gold.
Ring Resizing from $45Kirk Kara rings with a plain lower shank sized with stock matched to the karat and color, soldered, polished and stone-checked: $565 to size a platinum ring down, $92 for 18k white gold; a band 4mm or wider adds $46. Engraved or filigree shanks are evaluated first.
Mail-In Evaluation $19For engraving or filigree that runs around the band, two-tone rings with rose or yellow gold accents, worn milgrain, eternity bands or anything you can't name: a jeweler photographs the ring, examines it under magnification and sends an itemized quote. Credited in full toward the repair.

Common repairs for Kirk Kara pieces

Hand engraving, four generations in. Kirk Kara traces its craft to a workshop Kirk Karaguezian's grandfather opened in 1890. The family later worked in Beirut, came to the United States in 1983, and renamed the business Kirk Kara, after Kirk, when his daughters joined it. The brand's signatures are exactly the details a jeweler has to respect at the bench: delicate scroll and wheat patterns engraved by hand, hand-carved filigree, milgrain beading along the edges, and small peek-a-boo diamonds along each side of the head. Kirk Kara sets every diamond by hand under a microscope and holds it with four solid prongs, and says a single ring can take 6 hours of engraving. Its rings come in platinum and in 14k or 18k yellow, white or rose gold.

  • Prongs that catch. Prong Re-Tipping laser-welds new metal onto each worn tip and shapes it back over the stone: $224 for up to four prongs in platinum ($29 + $195), $65 in 18k white gold ($29 + $23 + $13) and $61 in 18k yellow gold ($29 + $19 + $13). A halo head with five to nine prongs adds $45, so $269 in platinum. A prong that has snapped off is rebuilt from its base under Prong Rebuild at the same prices, and our prong repair cost guide breaks down the numbers.
  • Peek-a-boo and side diamonds. The small diamonds set into the sides of the head take the everyday knocks a ring gets. Stone Tightening tests every stone for movement under 10x magnification and secures the loose ones, up to eight stones per order: $85 in platinum ($50 + $35), $60 in white gold, $55 in yellow gold. If one is already gone, Diamond Setting matches a replacement to its neighbors. Kirk Kara says it selects diamonds GH or higher in color and VS2 to SI2 or higher in clarity, which gives the jeweler a range to match. Setting labor for one prong-set side diamond is $178 in platinum ($5 + $158 + $15) or $57 in 14k white gold ($5 + $33 + $4 + $15), plus the diamond, which you approve first.
  • All-white gold that has turned warm. White gold gets its bright white from rhodium plating, which wears through with daily wear. Rhodium Plating polishes, deep-cleans and re-plates the ring: $79 for 14k white gold ($69 + $8 + $2), $83 for 18k ($69 + $8 + $6).
  • Two-tone rings. Kirk Kara says that on rings with rose or yellow gold accents, each metal is cast separately, the parts are soldered together, and the ring is plated to match each color before a final hand polish. Our rhodium is white or black only, so a ring with rose or yellow gold accents starts with the Mail-In Evaluation ($19, credited in full), and a jeweler plans the plating before any work.
  • All-rose or all-yellow rings. These are refreshed under Jewelry Polishing: $63 for an 18k yellow gold ring ($30 + $17 + $16) or $68 for 18k rose gold ($30 + $22 + $16). Polishing removes any color plating that's left, so the ring shows its gold alloy's own color. If you want a plated color back, say so in your order notes and ask about Gold Plating, which comes in a yellow, rose or white finish.
  • Platinum that has gone soft gray. Kirk Kara alloys its platinum with ruthenium and says its rings take on a patina over time. If you like that look, leave it; our answer to does platinum tarnish? covers it in more detail. If you want the bright finish back, Jewelry Polishing is $125 for a platinum ring ($30 + $95); the jeweler works through progressively finer compounds and does milgrain edges and recesses by hand, where a wheel would blur them.

Worn engraving, filigree and milgrain: what can be restored

Engraving and polishing pull in opposite directions. Every polish takes a little metal off, and on a hand-engraved ring the first thing to soften is the crisp edge of each cut. Kirk Kara notes that hand-cut engraving varies slightly in style, depth and spacing from ring to ring, and that if you want engraving copied from an existing piece, it asks for that piece as a reference so its engravers can come as close to the style as they can. That leaves you a few honest routes:

  • Ask Kirk Kara first. If you want the maker's own hand on the ring, ask Kirk Kara or your retailer whether it re-cuts worn engraving.
  • Re-cut here. Hand Engraving, from $250, is graver-cut work done by hand, including re-cutting engraving that wear has softened; where enough metal remains, the engraver follows the lines that are still there. It's quote-only: send photos through the contact page and a jeweler sets the exact price before anything ships. Re-cut work is our engraver's hand, not Kirk Kara's, and it's never presented as Kirk Kara's work.
  • Milgrain worn flat. Restoring milgrain beads isn't a menu service here, so it starts with the Mail-In Evaluation ($19, credited in full), which returns photos and an itemized quote.
  • Bent or cracked filigree. Filigree is open metalwork, and a crack in it is structural. That's an evaluation too, before any metal is cut or heated.
  • Just a clean? Every repair price includes a clean and polish. If you'd rather the engraved surfaces be cleaned but not polished, say so in your order notes; a jeweler confirms the plan when the ring arrives, and any change in scope waits for your approval.

Sizing a Kirk Kara ring, and Kirk Kara's own sizing offer

Kirk Kara's FAQ says most of its rings can be resized and some cannot, and that once anyone other than Kirk Kara or its retail partners has sized or repaired a ring, it can no longer honor its limited warranty; our answer on whether resizing voids a warranty covers the general question. For rings bought on kirkkara.com, it offers one complimentary resize within 12 months of purchase, usually by no more than one full size, and it says its eternity bands can't be resized at all. You ship and insure the ring to Kirk Kara after receiving a return authorization (RA) number, and Kirk Kara pays return shipping within the US. Rings already resized or altered by another jeweler may no longer qualify, so inside that first year, ask Kirk Kara first.

After that, Ring Resizing cuts the shank at the bottom of the ring and adds or removes metal there, with sizing stock matched to the karat and color. For a Kirk Kara ring with a plain lower shank, it's $565 to size a platinum ring down ($45 + $520), $92 for 18k white gold ($45 + $24 + $23) and $81 for 18k yellow gold ($45 + $13 + $23); a band 4mm or wider adds $46, so $611 in platinum or $138 in 18k white gold. Sizing up adds $5, plus $35 for each full size beyond the first, and most rings can move about 2 to 3 sizes either way.

  • Engraving or filigree at the bottom of the band. If the pattern runs all the way around, the sizing cut goes through it, and the new metal is blank until it's engraved by hand. Those rings start with the Mail-In Evaluation ($19, credited in full), so you see photos and options before any metal is cut; our answer on whether an engraved ring can be resized explains the trade-off.
  • The name inside. Kirk Kara engraves its name in a ring only after it passes all ten of its quality tests. If that mark or the metal stamp sits near the bottom of your band, mention it in your order notes.
  • Eternity bands. Kirk Kara says its eternity bands can't be resized, because the diamonds run all the way around, and asks owners to contact its Customer Care about options. Send one here only through the evaluation, and a jeweler tells you plainly what, if anything, can change its fit.

Kirk Kara's warranty, and when to use us

Kirk Kara gives all its items a 1-year manufacturer warranty against workmanship defects; it doesn't cover misuse, neglect, abuse or general wear and tear. To keep it, Kirk Kara asks you to take the ring and its authenticity card to a Kirk Kara retailer and have the retailer send it to Kirk Kara for service, and it asks owners not to mail repairs to it without prior written approval. Its FAQ adds that once a third-party jeweler has repaired or sized the ring, Kirk Kara can no longer honor that warranty, and that repairs after the first year go back to Kirk Kara for evaluation and pricing.

So which route? Inside Kirk Kara's 1-year warranty, or for anything that looks like a defect, go through a Kirk Kara retailer, because outside work can void that coverage. We fit when the warranty year has passed, the ring was inherited or bought without its card, or the job is ordinary wear you want fixed now. Every piece is photographed on arrival and again before it ships back, and those photos stay in your account as a record of what was done.

Before you ship your Kirk Kara ring

  • Check your coverage first. If the ring is inside Kirk Kara's warranty year or eligible for its complimentary resize, use those before booking anything here.
  • Read the stamp inside the band. It tells you the metal and karat to choose on the repair page. If you can't read it, choose the not-sure option and the metal is tested at no charge, with the exact price set once it's confirmed.
  • Insure the full value. $100 of coverage is included each way. Full value costs 2.5% of the value above $100, one fee for both directions: $197.50 for an $8,000 ring (2.5% x $7,900), up to $10,000 per package. Over $10,000, contact us before shipping. The details are on shipping and insurance; for the safety question in full, see is it safe to mail jewelry?
  • Booking an appraisal? A Jewelry Appraisal, from $105, is a written replacement value with photographs, not a lab grading report. Send copies of the center diamond's grading report and the Kirk Kara authenticity card if you have them.
  • Plain box, signature both ways. Leave the ring box at home and pad the piece so it can't shift in a plain, sturdy box, with nothing on the outside naming the contents. The prepaid UPS label is waiting in your account, not your email; drop the box at any UPS location. US addresses only; coverage runs from UPS's first scan until it's signed for, and a signature is required at our studio and at your door.

JewelryRepair.com is run by Sky Jewelry at 354 Lenox Avenue (Malcolm X Blvd), New York, NY 10027: family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989. A bench jeweler does the work, a second jeweler checks it, and the repair carries a 1-year workmanship guarantee. Nothing we fit is presented as a Kirk Kara part. Questions first: (212) 597-2899.

Before you ship

  1. Pick the repair and your metal Choose the service and the metal: platinum, or 14k or 18k white, yellow or rose gold. The full price and your promised-by date show before checkout. Engraved or filigree shanks that need sizing, and two-tone rings, start with the $19 Mail-In Evaluation.
  2. Ship with the prepaid label Your prepaid UPS label is in your account within minutes. Pack the ring in a plain, sturdy box, add full-value coverage before checkout if you need it, and drop it at any UPS location. US addresses only.
  3. Photographed, repaired, checked Your ring is photographed the day it arrives at our New York studio, engraving and inside marks included. A bench jeweler does the work and a second jeweler checks it.
  4. Back by UPS, signed for It's photographed again before it ships, comes back with a signature at your door, and carries a 1-year workmanship guarantee from the day it's delivered.
Independent service. JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by Kirk Kara. If your piece is covered by the brand's own warranty or service program, check with the brand first.

Questions

Can a Kirk Kara engagement ring be resized?
Usually, if the bottom of the band is plain. Ring Resizing at JewelryRepair.com is $565 to size a platinum Kirk Kara ring down and $92 for 18k white gold, plus $46 for a band 4mm or wider, with sizing stock matched to the metal. Where engraving or filigree runs around the bottom of the band, start with the $19 Mail-In Evaluation, credited in full. Inside the first 12 months, check Kirk Kara's own free resize first.
Does Kirk Kara offer free resizing?
Yes, once, for rings bought on kirkkara.com: one complimentary resize within 12 months of purchase, usually by no more than one full size, and not for eternity bands. Get a return authorization (RA) number from Kirk Kara before shipping; you ship and insure the ring there, and Kirk Kara pays the return within the US. A ring already resized or repaired by another jeweler may no longer qualify.
Can a Kirk Kara eternity band be resized?
Kirk Kara says no: its eternity bands can't be resized, because the diamonds run all the way around, and it asks owners to contact its Customer Care to review options. For a second look, send the band through JewelryRepair.com's $19 Mail-In Evaluation, credited in full; a jeweler photographs it, examines it under magnification and tells you plainly what, if anything, can change its fit, before any work.
Can worn hand engraving on a Kirk Kara ring be restored?
Usually, if enough metal remains, by re-cutting it by hand, quoted from photos first. Hand Engraving at JewelryRepair.com starts at $250 and is quote-only: a jeweler reviews your photos and sets the exact price before anything ships. The re-cut lines are our engraver's hand, not Kirk Kara's. For the maker's own hand, ask Kirk Kara or your retailer whether it re-cuts worn engraving.
Will outside repair void my Kirk Kara warranty?
Yes, while the warranty year is running. Kirk Kara's FAQ says that if any repair or sizing is done by jewelers other than its own retail partners, it can no longer honor its limited warranty, which covers workmanship defects for one year and is serviced through a Kirk Kara retailer with the ring's authenticity card. Inside that year, or for a suspected defect, start there. JewelryRepair.com is an independent repair service and is not affiliated with Kirk Kara.
Why does my Kirk Kara platinum ring look dull or gray?
Most likely it's patina, and that's normal. Kirk Kara alloys its platinum with ruthenium and says its rings develop a patina over time. If you prefer the bright finish, Jewelry Polishing restores it for $125 on a platinum ring at JewelryRepair.com, with milgrain edges worked by hand. On a heavily engraved ring, say in your order notes how much of the engraved surface you want polished.