Repair questions · Chains, clasps & bracelets
Can a broken ball (bead) chain be fixed, and how do you fix it?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Usually fixable. A ball chain fails at the snap-on connector, or at a joint where a short wire pulls out of a ball.
- A connector is a home fix. It snaps over the end balls without tools; buy one in the matching ball size.
- A mid-chain break has two answers: cut back to sound balls and add a connector, or have a jeweler rejoin it so the chain keeps its length.
- The metal decides whether a jeweler is worth it. A steel or plated dog tag chain usually costs less to replace; a sterling or gold chain, or one with a story, is worth repairing.
- Keep every piece. Loose balls, the connector and both ends help match the repair.
Prices
| Service | Price | What's included |
|---|---|---|
| Chain Soldering | from $30 | Ball chain is a listed chain type at no extra charge. One break rejoined so the chain keeps its length; hollow chains are laser-welded (the hollow option adds $20). Gold, extra breaks and other metals add to it. |
| Chain Shortening | from $44 | Links removed at the clasp end and the clasp re-soldered, for a chain that's too long or damaged near a soldered clasp; the removed links come back to you. |
| Clasp Replacement | from $48 | For ball chains that end in a spring ring or lobster: a new clasp sized to the chain, soldered on and action-tested. Snap-on connectors aren't a listed clasp. |
| Chain Lengthening | from $54 | Matching length added at the clasp end, for a chain that came up short after a break. |
| Mail-In Evaluation | $19 | Not sure what broke or what the metal is: examined under magnification, itemized quote with photos, credited in full. |
How to fix a ball chain yourself
On a base-metal chain, a connector fix takes a few minutes:
- 1. Find the break. A chain that falls open at the ends has a worn or spread connector, or a dented end ball. A wire poking out of a ball, or a flattened or split ball, means a damaged joint mid-chain.
- 2. Measure a ball. Connectors are sold by ball diameter, so measure one ball across in millimeters. Wikipedia puts standard steel ball chain at about 2.4 mm and sterling silver jewelry ball chain at about 1 mm to 2.2 mm.
- 3. Buy the matching connector in that size, and in the chain's metal if you can.
- 4. Cut out the damage. With flush cutters, snip the wire between balls so a whole, undamaged ball is left at each end. Cut the wire, never the ball.
- 5. Snap it closed. Press one end ball into each side of the connector until it seats, then tug gently to test it.
The chain ends up a ball or two shorter. The risks: squeezing a hollow ball with pliers crushes it, and a connector one size too large slips off under a light tug. On sterling or gold, a base-metal connector won't match. If in doubt, stop before the first cut and send it in.
How a ball chain is built, and why it breaks
A ball chain isn't made of links. As Wikipedia describes it, the balls are hollow, each with two small holes on opposite sides, and they're joined by short pieces of wire whose ends are deformed like rivets inside the balls. Each joint swivels freely, which is why ball chain resists kinking, but the same article notes the chain has relatively low strength.
There's no solid link to close, so the weak points are the riveted wire ends and the thin walls of the balls: a hard tug can pull a wire out through its hole, and a crushed ball loses its grip on the wire. Some ball chains close with a snap-on connector that clicks over the last ball at each end; Wikipedia notes these need no tools and are reusable. Others, often in silver and gold, end in a spring ring or lobster clasp, and when that fails it's a clasp repair, not a chain repair.
How a jeweler repairs a ball chain
On arrival, the jeweler also checks nearby balls and wires for damage. The route depends on where it is:
- A break in the middle. Chain Soldering lists ball chain as a chain type and rejoins the break so the chain keeps its length. Hollow chains can't take a torch's heat without collapsing, so they're laser-welded instead.
- Damage near a soldered clasp, or a chain that's too long anyway. Chain Shortening removes links at the clasp end and re-solders the clasp, and the removed links come back to you. It doesn't take out damage from the middle of the chain.
- A failed spring ring or lobster. Clasp Replacement fits a new one sized to the chain.
- A snap-on connector chain. Connectors aren't a listed clasp, so for a new connector, or to swap one for a lobster, start with a free photo quote through the contact page or the Mail-In Evaluation.
Your chain is photographed when it arrives and again before it ships. At the New York studio of Sky Jewelry, family jewelers on Lenox Avenue with over 50,000 repairs since 1989, a bench jeweler rejoins the chain and a second jeweler checks the joint; the repair carries a 1-year workmanship guarantee. If more damage turns up, work pauses until you approve photos and an itemized update.
What it costs at JewelryRepair.com
Chain Soldering starts at $30 for one break in sterling silver, and ball chain adds nothing for the chain type. Gold adds its metal and karat charge:
- Sterling silver, one break: $30.
- 14K yellow gold, one break: $41 ($30 + $7 + $4).
- 14K white gold, one break: $48 ($30 + $14 + $4).
- Hollow chains: the form asks whether the chain is hollow. Yes adds $20 (silver, one break: $50). If you can't tell, choose not sure, which adds nothing; a jeweler confirms everything on arrival, and any change in scope is yours to approve before work begins.
- More than one break: two breaks add $17, three add $35.
- Shortening: $44 in sterling silver or 10K yellow gold; 14K yellow gold $50 ($44 + $6); a 2.0 mm chain adds $5.
- A new spring ring or lobster: from $48 in silver; a small 14K yellow gold lobster is $67 ($48 + $19).
- Adding length back: Chain Lengthening, from $54.
Not sure which applies? The Mail-In Evaluation is $19, credited in full toward the repair. The chain soldering cost guide explains how chain repairs are priced.
Is it worth repairing, and before you ship
Run the numbers first. Shipping is $30 round trip per order, so a $30 repair on a plain steel or plated ball chain, the kind used for dog tags and keychains, almost always costs more than a new chain. Repair makes sense when the chain is sterling or gold, when it belonged to someone, such as a service member's dog tag chain, or when you're sending other repairs anyway, since one $30 charge covers everything in the box. For steel or plated chain, ask for a free photo quote first; steel pieces needing solder work go to a quote.
- Bag every piece together: both ends, the connector or clasp, any pendant and any loose balls.
- Note the metal if you know it; if not, choose not sure and it's tested at no charge.
- Ship it plainly. The prepaid UPS label is ready in your account after checkout. Use a sturdy small box with nothing on the outside naming the contents and drop it at any UPS location. $100 of coverage is included each way, from UPS's first scan until it's signed for, with a signature both ways.
Questions
How do you fix a ball chain clasp?
Can a ball chain be soldered?
Can you shorten a ball chain?
Are ball chains strong?
Can a broken dog tag chain be fixed?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list