Jewelry repair questions · Chains, clasps & bracelets

Can a broken rosary be fixed?

Usually, yes. Most rosaries break at a jump ring holding the crucifix or centerpiece, and that ring can be soldered shut, from $19 in sterling silver at JewelryRepair.com. Broken bead links, cord rosaries and missing beads are quoted after a $19 Mail-In Evaluation, credited in full.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

59beads on a standard five-decade rosary: count them before you ship
$19Jump Ring Repair in sterling silver, soldered shut so it can't pull open
$30UPS round trip per order, with $100 of coverage each way
50,000+repairs since 1989

The short version

  • Most breaks are small. The crucifix or centerpiece usually comes off because a jump ring pulled open, and a soldered ring can't pull open again: Jump Ring Repair is $19 in sterling silver.
  • Bead links, cords and missing parts are quoted after a jeweler has looked at the rosary, through the $19 Mail-In Evaluation, credited in full.
  • Plated and cast base-metal parts often can't be soldered, and are usually replaced instead.
  • A blessed rosary can be repaired. Whether to have it blessed again is a question for your parish priest.
  • Keep every bead and part, and count them: a standard five-decade rosary has 59 beads.

Prices

Service PriceWhat's included
Jump Ring Repair from $19The ring holding the crucifix or the centerpiece soldered closed, or replaced with a heavier one. Sterling: one ring $19, two $39 ($19 + $20); 14K yellow gold, one ring $31 ($19 + $7 + $5).
Chain Soldering from $30A break in the chain between beads on a silver or gold rosary, soldered and polished flush. Sterling $30; 14K yellow gold $41 ($30 + $7 + $4); a second break adds $17.
Bail Repair from $39A solid silver or gold crucifix or medal whose top loop has cracked or worn thin: soldered, rebuilt or replaced so it hangs straight. Sterling $39; 14K yellow gold $63 ($39 + $20 + $4).
Mail-In Evaluation $19Broken bead links, missing beads, cord or thread rosaries, plated or cast parts, inherited or very old rosaries, or more than one problem: examined under magnification and photographed, with an itemized quote. Credited in full toward approved work.

How a rosary is built, and where it breaks

A rosary is a loop of beads with a short strand hanging from it that holds a crucifix or cross. A standard five-decade rosary has 59 beads in all; the hanging strand carries five of them and joins the loop at a center medal, a knot or a large bead. Early rosaries were strung on thread, often silk; modern ones are more often built as a chain of linked beads.

In a linked rosary each bead sits on a short wire pin with a small loop at each end, and the loops join bead to bead or to short lengths of chain. The Sisters of Carmel, who make wire rosaries by hand, note that many makers use pre-formed eye pins, and that jump rings at the centerpiece and crucifix are easily opened and stretched out of shape, making that the spot where rosaries most often break. Bead loops, chain sections, frayed cord and worn crucifix loops are the other weak points.

What can be repaired, and how

  • An opened jump ring is closed with solder, so it physically cannot pull open again, or replaced with a heavier ring if it's thin or stretched. That's Jump Ring Repair.
  • A broken chain section on a silver or gold rosary is soldered and polished flush under Chain Soldering.
  • A crucifix or medal whose top loop has cracked is soldered, rebuilt or given a new loop under Bail Repair, so it hangs straight.
  • An opened or snapped bead link means re-forming or replacing the wire loop on that bead to match its neighbors. It isn't a menu item, so it's quoted after the evaluation.
  • A cord or thread rosary is quoted after the evaluation too. Pearl Restringing ($15 + $4 per inch, with a Beads option) prices a straight strand; a rosary's loop, hanging strand and crucifix make it more than that. See how beaded strands are restrung.
  • A missing crucifix, centerpiece or bead needs a replacement: a crucifix you choose can be attached with a jump ring soldered shut, and whether a bead can be matched is part of the quote, not something to promise sight unseen.

The metal and the beads decide the method

  • Sterling silver and gold take solder well, and solder is matched to the metal, so a repaired jump ring or link is hard to spot.
  • Plated base metal is common on inexpensive rosaries. Solder heat can damage plating, so the Start a Repair wizard sends plated pieces that need solder work to a quote first.
  • Cast crucifixes and centerpieces on budget rosaries are often pot metal, a low-melting, mainly zinc alloy that is not easily glued, soldered or welded, so a broken casting is usually replaced.
  • Glass, wood and plastic beads can be damaged by a torch's heat, one reason a rosary is examined before it's quoted.
  • Old and inherited rosaries go through the same $19 evaluation, with each step then quoted item by item under Antique & Heirloom Restoration.

Is it all right to repair a blessed rosary?

Canon law asks that sacred objects designated for worship by blessing be treated reverently and not put to inappropriate use, even when privately owned (Canon 1171), and a careful repair that lets a rosary be prayed with again fits that. Father Eduardo Hayen Cuarón of Juárez, Mexico, quoted by ChurchPop on caring for damaged blessed objects, said a broken rosary "can be recovered," noting that his own rosaries have broken at a link that had opened slightly.

Whether to have it blessed again is a question for your parish priest; under canon law any priest can impart blessings, apart from those reserved to bishops or the Pope (Canon 1169). If a rosary truly can't be repaired, the same priest advised burying or burning a damaged blessed object, or taking it to a parish to be disposed of properly, rather than throwing it away. Keep a silver crucifix or family medal first: it can go onto a new rosary with a jump ring soldered shut.

Can I fix a rosary myself?

A small break, as a stopgap. On a rosary the wire loops sit right against the beads, so work slowly and hold the bead, not the wire. A loop or ring closed by hand still has an open seam and can pull apart again; the method, and why soldering is the lasting fix, is in can a necklace jump ring be soldered shut? Don't glue a crucifix back on, and don't try to solder a cast or plated part with a hobby iron: pot metal resists solder, and the heat can mark the plating and crack nearby beads.

What it costs, and before you ship

Rosaries are repaired at the New York studio of Sky Jewelry, on Lenox Avenue since 1989 with over 50,000 repairs since 1989. Each price carries the 1-year workmanship guarantee:

  • Jump rings: one in sterling silver $19; two, such as the crucifix and the centerpiece, $39 ($19 + $20); one in 14K yellow gold $31 ($19 + $7 + $5).
  • Chain break: sterling $30; 14K yellow gold $41 ($30 + $7 + $4).
  • Crucifix or medal loop: Bail Repair, $39 in sterling.
  • Bead links, cord rosaries, plated or cast parts, missing pieces: the $19 Mail-In Evaluation, credited in full; approve all, some or none of the quote.

Before you ship, lay the rosary out, count the beads against the 59 of a standard five-decade rosary, and bag every loose bead, the crucifix and the centerpiece together with a note of where each belongs. UPS shipping is $30 round trip per order; for an heirloom, full value is insurable at 2.5% of the value above $100, so a $500 rosary costs $10 to cover ($400 × 2.5%). More in how jewelry shipping insurance works.

Questions

Can a broken rosary still be used?
Yes, though a rosary missing its crucifix or a run of beads is easy to lose more from, so keep every part and stop carrying it until it's mended. Most breaks are an opened jump ring or bead link, and both are repairable. At JewelryRepair.com a jump ring soldered shut starts at $19 in sterling silver; anything less clear-cut starts with a $19 evaluation, credited in full.
Does a repaired rosary need to be blessed again?
That's a question for your parish priest rather than a jeweler. Asking for a fresh blessing is simple, since under canon law any priest can impart blessings apart from those reserved to bishops or the Pope. Canon law also asks that blessed objects be treated with reverence, and a careful repair that lets the rosary be prayed with again is in keeping with that.
How much does it cost to fix a rosary?
At JewelryRepair.com, the most common repair, a jump ring soldered shut where the crucifix or centerpiece hangs, is $19 in sterling silver, or $39 for two. A chain break is $30 in sterling, and a cracked crucifix loop is $39 under Bail Repair. Bead links, cord rosaries and plated or cast parts are quoted after the $19 Mail-In Evaluation, credited in full. Shipping is $30 round trip per order.
Can a rosary with missing beads be repaired?
Often, if you have the beads or a match can be found. Loose beads can usually go back on new wire links or cord in their original places, so send every one you have, sealed in a small bag. If a bead is lost, a replacement has to be found, and whether a match is possible is part of the quote. At JewelryRepair.com this starts with the $19 Mail-In Evaluation, credited in full.
Can you restring a rosary?
Yes, if it's strung rather than linked. Rosaries were originally strung on thread, often silk, and cord rosaries are still made; restringing replaces the cord and keeps the beads in order. At JewelryRepair.com a strung rosary starts with the $19 Mail-In Evaluation, credited in full, because its loop, hanging strand and crucifix make it more than the straight strand Pearl Restringing prices.