Jewelry repair questions · Watches
Can a damaged watch case, case back or bezel be repaired or replaced?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Often fixable after inspection: small dings on a solid case, a case back that's hard to open or won't reseal, tired gaskets, a stiff or gritty bezel.
- Sometimes fixable: bent or cracked lugs, damaged case-back threads or screws, a cracked display back, a bezel that slips or won't click, a broken insert.
- Hardest: a cracked case body, corrosion eaten into the metal, plating worn through, or a part that's no longer made.
- Case back replacement depends on finding a back that fits the case; laser welding is a trade method for steel that's hard to solder, judged case by case.
- Water resistance is the hidden casualty of any case damage.
- Under the maker's warranty or a service plan? Check with the maker first, because outside service can void it.
Prices
| Service | Price | What's included |
|---|---|---|
| Mail-In Evaluation | $19 | The watch is photographed and examined under magnification, then you get an itemized quote with photos; approve all, some or none. Credited in full toward approved work. A declined watch ships back with the photos and findings; the $30 round-trip shipping already covers the return. |
| Water-Resistance Pressure Test | from $175 | Documented pressure-chamber test against the watch's stated depth rating, checking the crown, case back and crystal seals; resealing quoted if it fails. Some brands carry a charge. |
| Watch Battery & Pressure Check | from $30 | Quartz watches only: battery, gasket inspection and pressure check. A new case back gasket is a $25 add-on, so $55 for most brands. A mechanical watch with a case-back seal problem starts with the Mail-In Evaluation or the pressure test. |
| Watch Crystal Replacement | from $75 | When the damage is the crystal on the front rather than the case: acrylic, mineral or sapphire crystal replaced and the case resealed. |
| Stem & Crown Replacement | from $75 | When a knock has bent the stem or broken the crown: new stem and/or crown with a gasket; winding, setting and date tested. |
| Engraving Removal | from $40 | An old inscription removed from a watch case back and the surface refinished; $70 on stainless steel ($40 + $30). |
Case back repair or replacement: four ways a watch opens
Wikipedia's watch article lists four ways into a case, each with its own failures:
- Snap-off (press-on) backs press on. Pried with the wrong tool they get nicked; bent, they may no longer snap home or seal.
- Screw-down (threaded) backs rotate off. Forced on at an angle, they damage the threads; one that won't turn may be stuck with dirt or corrosion.
- Screw backs are held on by tiny screws. A slipped driver can strip a screw head or its hole, and a lost screw leaves the seal uneven.
- Unibody cases have no back; the way in is through the crystal.
A back that's lost, cracked or too damaged to seal is replaced rather than repaired, if a back that fits the case can be found; availability varies by brand, model and age. A cracked display (exhibition) back is a seal problem, not just a cosmetic one. Any back that has been forced, dented or cross-threaded is a seal problem too: Seiko's instructions note that a watch's original water resistance may deteriorate when the case back is closed again after opening, and ask for a water-resistance test at every battery change on watches rated 10 bar or more.
Dents, lugs, laser welding and the case itself
- Dents and dings. On a solid steel or gold case, a shallow ding can sometimes be blended by refinishing, depending on its depth and where it sits. On gold-plated or PVD-coated cases the color is a thin skin, and working a dent can cut straight through it; see can a scratched watch case be polished?
- Bent or cracked lugs. A lug knocked out of line may no longer hold the spring bar, and the strap can fall off. Straightening a thin lug is delicate; a crack is a bigger job.
- Laser welding broken metal. Stainless steel is hard to solder, one reason jewelers turned to laser welders (Ganoksin); trade reports there describe them rejoining stainless steel bracelet links and rebuilding missing metal on rings. Whether a particular case can be rebuilt that way depends on its metal, its finish and how close the damage sits to the gaskets, crystal and movement, which is why it's judged in hand.
- Damage near the crown can bend the stem or stop a screw-down crown seating; see Stem & Crown Replacement.
The bezel
The bezel is the ring around the crystal. On dive and GMT watches it rotates, with a scale on an insert. Typical faults:
- Stiff or gritty rotation, often from dirt packed into the gap between bezel and case.
- A bezel that spins freely, skips or won't click, which points to a worn or broken part underneath.
- A cracked, faded or scratched insert.
- A loose or missing bezel, which leaves the edge of the crystal exposed; keep the watch dry until it's fixed.
A scratched crystal is a separate question, answered in can a scratched watch crystal be polished?
Why case damage matters even if the watch still runs
Water enters through the gasket-sealed openings: case back, crystal and crown. A dent at the case-back seat or a cracked display back can open a path. Wikipedia's summary of water-resistance standards notes that whether a watch survives water depends on the age of its sealing material and on past damage, among other things, and that most makers advise testing a dive watch annually or every two to three years, with seals replaced. Moisture inside turns a case repair into an overhaul.
After case work that touches a seal, the last step is a Water-Resistance Pressure Test, $175 for most brands: the watch is tested against its own stated depth rating, and resealing is quoted if it fails. Fog under the crystal? Keep it dry and read why is my watch fogged up inside?
What JewelryRepair.com can do, and what it costs
Case, case-back and bezel repair isn't a single catalog service at JewelryRepair.com, so there's no fix or price promised sight unseen:
- Start with the Mail-In Evaluation, $19. You get photos and an itemized quote; approve all, some or none. The $19 is credited in full toward approved work, and a declined watch ships back with the photos and findings; the $30 round-trip shipping already covers the return.
- Related fixed-price work, most brands: for a quartz watch having its battery changed, a new case back gasket is a $25 add-on to the Watch Battery & Pressure Check ($30 + $25 = $55), while a mechanical watch goes to the evaluation or the pressure test; Watch Crystal Replacement is $75; Stem & Crown Replacement is $75; the Water-Resistance Pressure Test is $175.
- An inscription you want gone: Engraving Removal takes watch case backs back to clean metal, $70 on stainless steel ($40 + $30).
- Water already inside: a Watch Overhaul is $195 for quartz and $295 for mechanical on most brands.
JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by any watch brand, and we don't promise factory parts for a case, case back or bezel. If your watch is still under the maker's warranty or a service plan, check with the maker first, because outside service can void it; see independent repair vs a brand service center.
Before you ship
- Keep it dry, and bag any loose bezel, insert, back or screws with the watch.
- Pack it plain, wrapped so it can't move, with nothing on the outside naming the contents. The prepaid UPS label is in your account; drop the box at any UPS location. Shipping is $30 round trip per order, US addresses only.
- Cover the full value. $100 of coverage is included each way. Full value up to $10,000 is 2.5% of the value above $100, one fee for both directions: a $1,500 watch costs $35 (2.5% × $1,400). Coverage runs from the first UPS scan until the package is signed for, and a signature is required both ways.
- Photographed on arrival and before it ships back; a bench jeweler does the work, a second checks it, with a 1-year workmanship guarantee.
Watches go to Sky Jewelry's New York studio at 354 Lenox Avenue (Malcolm X Blvd), New York, NY 10027: family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.
Questions
Is laser welding used to repair watch cases?
Can a dented watch case be fixed?
Can a stripped screw-down case back be repaired?
Can I replace a lost watch case back?
Can a watch bezel be repaired?
Can a cracked display case back be replaced?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list