Jewelry repair questions · Rings & sizing
Can a worn wedding or engagement ring be restored to look new?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Yes, most worn rings can be brought back. What it takes depends on the kind of wear: surface, color or structure.
- Surface: scratches and a dull finish polish out. That's Jewelry Polishing.
- Color: white gold that looks faintly yellow has lost its rhodium plating. Rhodium Plating brings the white back.
- Structure: prong tips worn flat and a band worn thin at the bottom are what lose stones and crack. They need new metal, not a shine.
- Not sure what yours needs? The Mail-In Evaluation examines the whole ring for $19, credited in full toward the work you approve.
Prices
| Service | Price | What's included |
|---|---|---|
| Jewelry Polishing | $55 14K yellow gold ring | Scratches and dullness worked out through progressively finer compounds to a mirror, satin or brushed finish, with milgrain and fine details done by hand. A 14K white gold ring is $60 ($30 + $22 + $8) and a platinum ring $125 ($30 + $95). |
| Rhodium Plating | from $79 14K white gold ring | For white gold that has turned faintly yellow: polished, cleaned and re-plated with rhodium. An 18K white gold ring is $83 ($69 + $8 + $6). |
| Prong Re-Tipping | from $29 | New metal laser-welded onto prong tips worn flat, then shaped and seated back over the stone. A six-prong head is in the 5 to 9 tier, $102 in 14K white gold ($57 + $45); 1 to 4 platinum prongs are $224 ($29 + $195). |
| Shank Repair | from $45 | A crack is soldered; a band worn thin is re-shanked with new metal. In 14K yellow gold: crack $57 ($45 + $7 + $5), half band $307 ($57 + $250), full band $432 ($57 + $375). In sterling silver: half band $120, full band $170. |
| The Anniversary Service | $199 | Yearly upkeep for an engagement ring: deep clean, magnified inspection, loose stones tightened as part of the service, re-rhodium on white gold and condition photos. Structural work beyond tightening is quoted separately. |
| Mail-In Evaluation | $19 | The whole ring examined under magnification, with an itemized quote and photos. Approve all, some or none; the $19 is credited in full toward approved work. |
How a ring wears, and what each kind of wear needs
A ring worn daily for years wears in a few predictable ways, and each has a different fix: some need a refresh, others a repair.
- Scratches and dullness. Thousands of hairline scratches scatter light, so the ring reads gray instead of bright. GIA notes that sterling silver is softer than gold and platinum and more prone to scratches and dents, and that higher-karat gold is softer than 14K or 18K. This is the easy part: polishing.
- Platinum patina. Platinum wears differently. Writing for Platinum Guild International, Jurgen Maerz explains that a scratch in platinum mostly pushes the metal aside into ridges instead of removing it, so a platinum band loses less metal and develops a soft, satiny patina. GIA says that patina can be polished away if you prefer shine. Keeping it harms nothing.
- White gold turning yellow. White gold's bright white comes from rhodium plating, and GIA notes that as the rhodium wears away, the ring may start to look warm in color; re-plating restores the white. Our rhodium plating cost guide puts it at about 12 to 24 months for engagement rings and wedding bands worn daily.
- Worn prongs. On a ring worn for decades, the claws over the center stone wear down with the band, which is why GIA's ring-settings guide recommends having prongs looked at from time to time. For how to tell when a stone is already at risk, see what to do if the diamond in your ring is loose.
- A band worn thin. The shank, the part of the band under your finger, takes the most contact. After many years it can be visibly thinner at the bottom than at the sides, flex when squeezed, or crack.
How a jeweler restores a worn ring, in order
Order matters: structure first, finish last. Welding and soldering leave marks that the polish then blends away, and rhodium copies every scratch beneath it. At the JewelryRepair.com studio in New York, run by Sky Jewelry, family jewelers on Lenox Avenue since 1989 with over 50,000 repairs since 1989, the sequence runs like this:
- Photograph and inspect. Your ring is photographed the day it arrives, before any work, then examined under magnification: every prong, every stone, the shank. If it needs more than you ordered, work pauses and you approve any change first.
- Rebuild what's thin. Worn prong tips get new metal laser-welded on through Prong Re-Tipping, and a snapped prong is raised again from its base through Prong Rebuild. A laser heats only the target spot, which is why, as a Ganoksin trade article on laser welders reports, jewelers can rebuild prongs close to stones that a torch could frost. A band worn thin gets half or all of its shank replaced with new metal through Shank Repair.
- Round it, and size it if needed. A band pushed oval is worked back to round on a steel mandrel and checked for cracks with Ring Reshaping. If your finger has changed over the years, Ring Resizing can be done on the same visit.
- Tighten the stones. Each stone is tested for movement, and loose ones are secured with Stone Tightening.
- Polish. The metal goes through progressively finer compounds to a mirror, satin or brushed finish, with milgrain and fine details worked by hand where a wheel would blur them.
- Re-plate white gold. Rhodium goes on last, over a flawless, thoroughly cleaned surface.
- Check and photograph again. A second jeweler checks the work, and the ring is photographed before it ships, so you can compare the intake and outgoing photos in your account.
What restoration can't do, and the alternatives
- Erase a deep gouge completely. A deep gouge can be softened until it blends in, but removing it entirely can take more metal than a band should lose, so the jeweler stops short.
- Bring back worn engraving. Polishing the inside of the band can fade a faint inscription further, so mention it in your order notes. A new inscription can be cut with Ring Engraving (from $60), and worn hand engraving can be re-cut through Hand Engraving (from $250, by free quote). More in whether a worn engraving can be re-engraved.
- Re-create milgrain or hand texture. Fine beaded edges worn smooth can't be polished back into existence. Ask about them on the Mail-In Evaluation; for an older heirloom, Antique & Heirloom Restoration quotes each step with photos before any work.
- Fix the stone itself. Polishing the metal doesn't touch a chip or scratch in a gem. Colored stones can be re-polished by a lapidary through Gemstone Polishing (from $65, by free quote); for diamonds, see whether a chipped diamond can be fixed.
- Keep the character you want. If you'd rather keep a patina or softened edges, say so in your order notes.
What ring restoration costs at JewelryRepair.com
These are typical restoration jobs, priced as the repair pages showed them on Nov 18, 2026. Each includes a clean and polish and the 1-year workmanship guarantee.
- A scratched 14K yellow gold band: $55 to polish ($30 + $17 for yellow gold + $8 for 14K). If it's also out of round, Ring Reshaping is $62 ($53 + $6 + $3), and the polish comes with it.
- A 14K white gold solitaire that looks yellow, with four prong tips worn flat: Prong Re-Tipping $57 ($29 + $23 + $5) plus Rhodium Plating $79 ($69 + $8 + $2), $136 together.
- A 14K yellow gold band worn thin at the bottom: half the band replaced for $307 ($45 + $7 + $5 + $250), or the full band for $432.
- A platinum band with a dull patina: $125 to polish ($30 + $95).
An engagement ring and wedding band can travel in one box on one $30 round-trip UPS label, and full value up to $10,000 can be covered for 2.5% of the value above $100: a $4,000 wedding set costs $97.50 to cover, both ways. More on the box and label in how to ship a ring safely.
Questions
How much does it cost to restore a wedding ring?
Can a wedding band that's worn thin be fixed?
Why does my white gold ring look yellow?
Does polishing a wedding ring make it thinner?
How often should a wedding or engagement ring be checked?
Can I restore my ring at home?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list