Jewelry repair questions · Metals, plating & finishing
Can scratches be polished out of a ring?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Fine scratches on gold, sterling silver and platinum rings and wedding bands polish out completely.
- Deep gouges can be softened, but erasing them may take more metal than a band can spare.
- Brushed and satin finishes are restored by re-cutting the texture.
- Scratched white gold is usually best re-plated, which includes the polish.
- Tungsten, titanium, cobalt, tantalum, black zirconium and palladium aren't on our polishing menu: send them for an evaluation.
Prices
| Service | Price | What's included |
|---|---|---|
| Jewelry Polishing | from $30 | Worked through progressively finer compounds on the wheel, with details and milgrain done by hand, to a mirror, satin or brushed finish. Ring: $30 in sterling silver, $55 in 14K yellow gold, $60 in 14K white or rose gold, $125 in platinum, $50 in stainless steel. |
| Rhodium Plating | from $69 | For scratched white gold: polished, cleaned and re-plated so the white returns with the shine. White gold ring: $77 in 10K, $79 in 14K, $83 in 18K. |
| Mail-In Evaluation | $19 | For tungsten, titanium, cobalt, palladium or a deep gouge: a jeweler examines the ring under magnification and sends an itemized quote with photos. The $19 is credited in full toward the repair. |
What polishing does to a scratch
A scratch is a groove. To make it disappear, a jeweler lowers the surface around it until it is level with the bottom of the groove, working through progressively finer compounds on the polishing wheel so each step erases the marks of the one before. The result is the original surface, minus a very thin layer of metal.
That thin layer sets the limit. Every metal loses a little each time it is polished, so a fine scratch costs almost nothing to remove, while a deep gouge in a thin band may only be softened. Platinum wears a little differently: Platinum Guild International says a scratch in platinum pushes metal aside rather than flaking it off, so the surface slowly turns satiny, a look called a patina. Polishing that patina back to a mirror still takes off a small amount of metal; at JewelryRepair.com it costs $125 for a platinum ring.
What to expect, metal by metal
- Yellow and rose gold polish beautifully. A 14K ring is $55 in yellow gold ($30 + $17 + $8) and $60 in rose; 18K yellow is $63.
- White gold is often plated with rhodium, and polishing out scratches takes some of that plating with it, which can leave the ring faintly yellow. Rhodium Plating polishes the ring first and then re-plates it: $79 for a 14K white gold ring ($69 + $8 + $2), against $60 for polishing alone.
- Platinum is $125 for a ring ($30 + $95). Expect the satin patina to return with wear; that metal is mostly displaced rather than lost, according to the Platinum Guild International.
- Sterling silver is soft, scratches easily and polishes easily: $30 for a ring. The Canadian Conservation Institute notes that some silver is lost each time tarnish is cleaned off, so don't polish more often than you need to.
- Tungsten carbide rates about 9 to 9.5 on the Mohs scale and can only be polished with abrasives harder than it, such as diamond or cubic boron nitride. Titanium, cobalt, tantalum, black zirconium and palladium aren't listed metals for Jewelry Polishing either. For any of these, book the Mail-In Evaluation ($19, credited) and a jeweler will tell you honestly what can be done.
Brushed, satin and matte finishes
A textured band shows scratches differently: a mark that crosses the grain stands out, while one that runs with it nearly disappears. Polishing that ring to a mirror would erase the scratches and the finish with them, so the jeweler refinishes it instead, re-cutting the texture in its original direction. Jewelry Polishing covers mirror, satin and brushed finishes at the same price; say which finish your ring has in the order notes. Polishing also lowers the surface slightly and rounds sharp edges, which matters most on signet rings: mention any engraving or crest you want kept crisp.
Can I polish a ring at home?
For light haze, yes. Wash the ring first in warm, soapy water, because grit left on the surface turns into an abrasive once you start rubbing; Jewelers Mutual gives the same advice before polishing brass. Then use a soft polishing cloth with light pressure, in one direction. That brightens the surface and softens hairline marks. It won't remove a scratch you can catch with a fingernail.
- Skip toothpaste and baking soda. Both are abrasives, and Jewelers Mutual warns they scratch softer metals, so you trade one set of scratches for a finer, wider one.
- Skip rotary tools, which remove metal fast and unevenly and round off edges and prong tips.
- Don't polish plated rings. The Canadian Conservation Institute warns that polishing can damage thin silver plating or remove it entirely, and gold plating, vermeil and rhodium are just as thin: the cloth takes the color off.
When polishing isn't the fix
- A band worn thin: Shank Repair replaces half the band with new metal, $120 in sterling silver ($45 + $75) or $307 in 14K yellow gold ($45 + $7 + $5 + $250). A crack alone is repaired from $45.
- Dents or an oval shape: Ring Reshaping, from $53, rounds the ring on a mandrel, checks it for cracks and polishes it.
- Old engraving you want gone: Engraving Removal, from $40, with the surface refinished.
- An engagement ring and wedding band scratching each other: GIA notes that a diamond can scratch any of the precious metals used for settings, so rings worn together keep marking each other. Soldering the set together stops them spinning against each other.
- A scratched stone rather than metal: see whether a gemstone can be repolished.
What it costs at JewelryRepair.com
Polishing at JewelryRepair.com is done at the bench in our New York studio by Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989. A clean and polish is included with every repair, so a ring coming in for resizing or a re-tip goes home polished; on its own, Jewelry Polishing starts at $30. Round-trip UPS shipping is $30, with a prepaid label in your account and $100 of coverage each way. Name the finish you want back in the order notes: mirror, satin or brushed are all the same price, and details and milgrain are finished by hand.
Questions
Can deep scratches be removed from a gold ring?
Is it normal for a wedding band to scratch, and can it be polished?
Can you polish a tungsten ring?
Does polishing a ring remove metal?
How do I get scratches out of a sterling silver ring at home?
Will polishing my white gold ring make it look yellow?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list