Jewelry repair questions · Metals, plating & finishing
Can rhodium plating be removed from a ring?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- It can come off. Rhodium is applied as a thin electroplate, and Wikipedia notes the thin layer wears away with use. Anything that removes a surface, a polish included, removes rhodium with it.
- Three routes: polishing it off, stripping it electrically with a plating cell run in reverse, or letting it wear away, which takes about 1 to 3 years on a ring and 12 to 24 months on an engagement ring or wedding band worn daily.
- Not with acid. Rhodium is completely insoluble in nitric acid and dissolves only slightly in aqua regia, which dissolves gold readily. An acid strong enough to touch the rhodium attacks the ring first.
- What you'll see depends on what's underneath: yellow gold, white gold's own warm gray-white, sterling silver that will tarnish again, or, on fashion pieces, a base metal.
- Black rhodium comes off too. If you want bright white instead of bare metal, Rhodium Plating strips the piece back and re-plates it, from $69.
- Here: removing rhodium to bare metal isn't a separate menu item, so it starts with the $19 Mail-In Evaluation, credited in full toward the work.
Prices
| Service | Price | What's included |
|---|---|---|
| Mail-In Evaluation | $19 | Removing rhodium down to bare metal isn't a separate menu item, so it starts here. A jeweler examines the ring under magnification, confirms what's under the plating, checks stones, prongs and any two-tone areas, and sends an itemized quote with photos before any work; the removal method is chosen at the bench. |
| Rhodium Plating | from $69 | Strips the piece back, re-polishes it and lays down fresh rhodium. The route from black rhodium to bright white, or back to white if you change your mind: 14K white gold ring $79 ($69 + $8 + $2), 14K yellow gold ring $77 ($69 + $6 + $2); black rhodium +$24. |
| Jewelry Polishing | from $30 | Machine and hand polishing through progressively finer compounds. Polishing takes rhodium off with the surface; for reference, a 14K yellow gold ring is $55 ($30 + $17 + $8). The evaluation quote says which service applies to your ring. |
| Gold Plating | $186 white gold ring, flash plating | For a white gold ring you want yellow, which removal alone can't do: real yellow gold electroplated over it, $186 ($60 + $126 for a white gold base). A 1–2 micron layer for daily wear adds $250. |
| Metal Testing & Verification | $15 | Hallmarks checked and the metal and karat tested and documented, so you know whether white gold, yellow gold, silver or plated base metal is under the rhodium before you decide. |
What's under the rhodium, and why it matters
Rhodium is a hard, silvery, platinum-family metal, and because it is so costly it is almost always used as a plating. Wikipedia notes it is electroplated on white gold and platinum to give them a reflective white surface at the time of sale, and that sterling silver is rhodium plated to resist tarnishing. Taking it off doesn't change your ring; it shows you the ring you actually own.
- Yellow gold plated white. The yellow comes back. Check first that the whole ring is yellow gold: many yellow gold engagement rings hold the center stone in white metal prongs, which stay white. See why gold rings have platinum prongs.
- White gold. It's gold alloyed with white metals, usually nickel, silver, platinum or palladium, and Wikipedia notes its natural color can border on pale yellow, tinted brown or even very pale rose. GIA notes a white gold ring may start to look warm as its rhodium wears; unplated, it looks like that all over; see does white gold tarnish.
- Nickel underneath. Our rhodium plating cost guide explains that rhodium seals nickel-bearing alloys away from the skin, and the American Academy of Dermatology estimates that more than 18 percent of people in North America are allergic to nickel. Removing the plating removes that barrier; see whether you can be allergic to white gold or sterling silver.
- Sterling silver tarnishes again without it; see does rhodium-plated jewelry tarnish.
- Platinum. GIA notes some platinum rings are rhodium plated too; underneath is platinum's own gray-white.
- Fashion and plated pieces. Rhodium over brass or gold plating sits on another thin layer that removal can cut through as well; see removing gold plating from silver.
A seller should have told you a piece was plated: under the FTC's Jewelry Guides, failing to disclose a surface layer of rhodium on products marked or described as precious metal is unfair or deceptive. Not sure what your ring is? Metal Testing & Verification checks the hallmarks and tests the metal for $15.
How a jeweler takes rhodium off
There are three ways, and the choice depends on the ring's shape, its stones and what's under the plating:
- Polishing. Rhodium is hard, but the layer is thin, so a polish clears it; as our rhodium guide notes, any repair that involves polishing removes rhodium around the work. The cost is a little of the metal underneath. The Canadian Conservation Institute, writing about silver, notes that each polish takes away some underlying metal and leaves fine scratches, which a jeweler then refines with progressively finer compounds. On a plain band that's quick. On milgrain, engraving, filigree or pavé, plating hides in the low spots, and clearing it by hand without blurring the detail is slow, careful work.
- Electrical stripping. A plating cell can be run backward: Wikipedia describes electropolishing as the reverse of electroplating, using current to remove the outermost layer of a metal object. Once the rhodium is gone, the outermost layer is your gold or silver, so the process has to be watched and stopped at the right moment, and the surface finished afterward.
- Not chemistry alone. Rhodium is completely insoluble in nitric acid and dissolves only slightly in aqua regia. Gold resists nitric acid but dissolves in aqua regia, and nitric acid dissolves silver. So any acid that could touch the rhodium would attack the ring underneath first.
Stones change the plan too: pavé and channel settings hold plating where a wheel can't reach, and pearls and opals need protecting. That's why the method is chosen with the ring in hand.
Black rhodium, and changing your mind
Black rhodium is a dark, gunmetal-colored plating, and JewelryRepair.com lists it as a $24 option on Rhodium Plating. It is still a thin surface layer, so it comes off the same ways, and polishing clears the high points first, so a part-polished piece looks antiqued: dark in the recesses, bright on top.
If you want bright white rather than bare metal, skip the separate removal step. Rhodium Plating strips the piece back, re-polishes it and lays down fresh white rhodium in one job. And if you take the rhodium off a yellow gold ring and later miss the white, it can go back on.
Should you remove it? The alternatives
- You want yellow gold back on a ring that was plated white: removal is the direct route, once the jeweler confirms it's yellow gold underneath.
- You're tired of re-plating white gold: you can simply stop. Our rhodium guide puts plating life at 12 to 24 months on an engagement ring or wedding band worn daily, wearing first on the bottom of the band; removing it now just gives you an even color sooner.
- You want a white gold ring to look yellow: removal can't do it, because white gold is white all the way through. Gold Plating lays yellow gold over it; see whether white gold can be turned into yellow gold.
- Your skin reacts to some metals: keep the rhodium.
- A store warranty or care plan covers re-plating: check its terms with the seller first, because outside work can void that coverage.
Can I do it myself?
On a plain, inexpensive band, a polishing cloth made for gold will wear rhodium down slowly; as our rhodium guide puts it, abrasive pastes and polishing cloths for gold are designed to remove a layer of metal. Expect it to go patchy, high points first.
Skip everything stronger. Acids won't dissolve rhodium before they damage gold or silver, a home plating kit run in reverse has no reliable stopping point, and a rotary tool can cut through to bare metal in one spot or catch a prong. Keep all of it away from stone-set rings, where compound packs into the settings.
What it costs at JewelryRepair.com
Prices from the live repair pages, Nov 18, 2026. Every repair price includes a clean and polish and the 1-year workmanship guarantee; the evaluation and metal testing are diagnostic services. The configurator shows your exact total before checkout.
- Removing rhodium to bare metal: the Mail-In Evaluation, $19, credited in full. A jeweler confirms what's under the plating, chooses the removal method with the ring in hand and sends an itemized quote with photos; approve all, some or none of it.
- For reference, Jewelry Polishing on a ring: $30 in sterling silver, $55 in 14K yellow gold ($30 + $17 + $8), $63 in 18K yellow gold ($30 + $17 + $16), $60 in 14K white gold ($30 + $22 + $8) and $125 in platinum ($30 + $95).
- Back to bright white, or black to white: Rhodium Plating, $69 for a sterling silver ring, $79 for a 14K white gold ring, $77 for a 14K yellow gold ring; black rhodium adds $24, so $93 on a sterling silver ring.
- White gold to yellow: Gold Plating, $186 for a white gold ring with flash plating ($60 + $126 white gold base); a 1–2 micron layer adds $250, so $436 in all.
- Not sure what it's made of: Metal Testing & Verification, $15 per item.
- Rush: +$50 on eligible repairs ships it back 2 to 3 days sooner.
Before you ship
In your order notes, say what you want to see when the rhodium is gone, and whether the ring has white prongs or a white head you want kept white; on a yellow gold ring with white prongs, that decides where the jeweler stops. Photograph the ring before you seal the box, so you have your own record of the plated color.
Shipping is $30 round trip per order by UPS, with the prepaid label ready in your account. $100 of coverage is included each way; covering a $2,000 ring in full costs $47.50 (2.5% of the $1,900 above $100), one fee for both directions. Packing and coverage details are on the shipping and insurance page.
JewelryRepair.com sends your ring to the bench of Sky Jewelry, family jewelers on Lenox Avenue, with over 50,000 repairs since 1989. Your ring is photographed when it reaches the New York studio and again before it ships back; a bench jeweler does the work and a second jeweler checks it.
Questions
Can rhodium be removed from white gold?
Will removing rhodium plating damage my ring?
Can black rhodium be removed?
How can I tell if my ring is rhodium plated?
Does rhodium plating wear off on its own?
How much does it cost to remove rhodium plating?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list