Jewelry repair questions · Metals, plating & finishing
Does rhodium-plated jewelry tarnish?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Rhodium doesn't tarnish. It is inert against corrosion and most aggressive chemicals and doesn't normally form an oxide, even when heated.
- Rhodium-plated jewelry can, once the plating wears through and the metal underneath meets air, sweat and sulfur.
- The color tells you the base. Dark gray or black spots mean silver; brown or green means brass or copper; a warm, yellowish tone means white or yellow gold.
- Washing can't fix exposed metal. Re-plating can.
- Polishing cloths wear plating, and dips attack exposed silver. Use soap and water.
Prices
| Service | Price | What's included |
|---|---|---|
| Rhodium Plating | from $69 | Polished to a flawless surface, cleaned ultrasonically and with steam, then re-plated. Sterling silver: ring or pendant $69, earrings or bracelet $89, necklace $109, necklace with pendant $124. 14K white gold ring $79; gold-plated or fashion ring $74. Black rhodium adds $24: $93 for a sterling silver ring ($69 + $24). |
| Metal Testing & Verification | $15 | Find out whether the base under the plating is sterling, white gold or brass before you spend on re-plating. |
| Mail-In Evaluation | $19 | For a piece with pitting, green corrosion or flaking under the plating: a jeweler examines it under magnification and quotes with photos. Credited in full. |
What happens on each base metal
- Sterling silver. Rhodium is plated over sterling to protect it from tarnish, and it works while the layer is intact. Where it wears through, the silver is exposed to sulfur compounds such as hydrogen sulfide and forms black silver sulfide, the same tarnish as on unplated sterling. It shows as dark spots or gray edges on an otherwise bright piece.
- Brass. Brass is an alloy of copper and zinc; its copper reacts with sulfur to form a brown, then black, copper sulfide, which can weather to a green-blue copper carbonate patina. Brass also corrodes in the presence of moisture, chlorides and some acids, so plated brass shouldn't go swimming or into the shower.
- White gold. Gold doesn't tarnish the way silver does. As the rhodium wears, GIA notes the ring may start to look warm in color: that's the alloy's natural tone, not corrosion. Our answer on white gold tarnish covers the exceptions.
- Black rhodium. A dark gray rhodium-based plating. Like regular rhodium plating it wears at edges and high points, where the brighter metal underneath shows, and on black-rhodium silver those bare spots can then tarnish.
A seller should tell you a piece is plated. Under the FTC's Jewelry Guides, it is unfair or deceptive to fail to disclose a surface layer of rhodium on products marked or described as precious metal.
Tarnish or worn plating? How to tell
- Dull and cloudy all over: lotion, soap and skin oil. It washes off.
- Dark spots that leave a gray or black smudge on a white cloth: tarnish on silver where the rhodium has worn through.
- Green or brown at edges, clasps or the back of a ring: brass or copper showing.
- Warm or yellowish on the palm side of a ring: white gold showing through worn rhodium.
- Flaking, blistering or pitting: the plating has lost its bond or the base metal is corroding beneath it. That's beyond cleaning, and re-plating over pits reproduces them.
Normally, rhodium wears off by rubbing rather than tarnishing or peeling (flaking means something went wrong with the bond or the base), so look first where the piece takes contact: the palm side and bottom of a ring, the back of a pendant, the clasp end of a chain, earring posts and the edges of a bracelet. Our rhodium plating cost guide puts plating life at about 1 to 3 years on a ring, and lists hand creams, chlorine, sweat and sulfur-containing products among the things that wear it faster.
Cleaning without stripping the plating
Rhodium is hard, 6 on the Mohs scale against 2.5 for silver and gold, but the layer is thin, so anything that removes a surface removes the plating. That rules out the usual tarnish tricks:
- Silver polishing cloths and polishes are made to take off a surface layer. The Canadian Conservation Institute notes that polishes remove silver along with tarnish; on a plated piece they remove rhodium too, and widen the bare patch.
- Silver dips are acidic; CCI advises exposing silver to them as little as possible to avoid pitting.
- Toothpaste and metal polish: GIA warns that the abrasives in some of them can erode metal.
Warm water, a drop of mild dish soap and a soft brush are enough for the plating itself. If dark spots remain after washing, they're on exposed silver, and the lasting fix is a new layer.
When re-plating can't fix it, and the alternatives
Re-plating is mostly preparation: the jeweler polishes the piece to a flawless surface and cleans it ultrasonically and with steam before the rhodium goes on, because rhodium reproduces every scratch and trace of oil beneath it. That makes it a good fix for worn silver and white gold, and a harder one for fashion pieces whose brass has pitted or gone green under the plating. If the jeweler finds damage like that on arrival, you get photos and an explanation, and the scope changes only with your approval.
- Sterling or white gold: re-plate it; the base metal is sound.
- A plated fashion piece: re-plating a ring is $74 here. Weigh that against what the piece means to you.
- Tired of re-plating sterling? Leave it unplated and let it tarnish and polish like ordinary silver; our answer on keeping sterling from tarnishing shows how to slow it.
What it costs at JewelryRepair.com
Re-plating is a routine bench job at Sky Jewelry, family jewelers on Lenox Avenue since 1989 with over 50,000 repairs since 1989, and JewelryRepair.com is how it takes that work by mail. Rhodium Plating as priced on the live repair page, Nov 18, 2026:
- Sterling silver ring or pendant: $69. Earrings or a bracelet: $89 ($69 + $20). Necklace: $109 ($69 + $40). Necklace with its pendant: $124 ($69 + $55).
- White gold ring: $77 in 10K, $79 in 14K ($69 + $8 + $2), $83 in 18K.
- Gold-plated or fashion ring: $74 ($69 + $5).
- Black rhodium: add $24, so $93 for a sterling silver ring.
- Rush: $50, ships it back 2 to 3 days sooner.
The arrival photos taken at the New York studio record exactly where the old plating had worn through, and the photos before it ships back show the fresh, even white, so you can compare the two in your account. A second jeweler checks the finish for missed spots. Our 1-year workmanship guarantee covers plating that wears prematurely; gradual wear from daily use is normal. Round-trip UPS shipping is $30 per order.
Questions
Does rhodium-plated sterling silver tarnish?
Does black rhodium tarnish?
Can I shower or swim with rhodium-plated jewelry?
Does rhodium-plated brass turn green or rust?
How do I clean tarnished rhodium-plated silver?
Does rhodium plating fade or wear off?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list