Jewelry repair questions · Earrings & pendants

How do you stop stud earrings from spinning or turning around?

Start with a snug back that presses on the lobe, such as a disc or screw back. If a heart, bar or cross still turns, its post isn't at the balance point, so the heavy side swings down. A jeweler can move the post or add an omega clip; omega conversions start at $100 a pair in sterling silver.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$100omega back conversion, sterling pair ($40 + $60)
$70screwback conversion, sterling pair ($40 + $30)
$19evaluation to move a post, credited in full
50,000+repairs since 1989

The short version

  • Why it spins: the post is a round axle in a round hole, and if it isn't at the earring's balance point, the heavier side turns down.
  • Shapes show it: hearts, initials, crosses, bars, clusters and climbers.
  • First fixes: seat the back properly, or use a disc or screw back that presses on more of the lobe.
  • If it still turns, the post needs to move to the balance point, or the earring needs a second point of contact, such as an omega clip.
  • Never glue a back or a post in place.

Prices

Service PriceWhat's included
Earring Back Conversion from $100 omega, sterling silver pair
from $70 screwback, sterling silver pair
Changes the fitting while leaving the earring itself untouched. Screwbacks clamp the lobe more firmly than friction backs, and an omega's hinged loop braces the earring against the back of the lobe. A leverback suits only earrings that can take a loop at the top; the jeweler confirms that before work.
Earring Post Repair from $30For a post that's loose at its base, bent or worn: the old post is removed flush, the pad cleaned to bare metal, and a new post soldered or laser-welded on straight, never glued. One earring is $10 less.
Mail-In Evaluation $19Moving a post to the earring's balance point depends on what's on the back, so a jeweler examines the pair under magnification and sends an itemized quote with photos before any work.
Hinge Repair from $45For hinged hoops and huggies whose hinge or catch has worn, so they flop, turn or open on their own. 14K gold earrings $62 ($45 + $11 + $6).

Why stud earrings spin

A stud's post passes straight through the piercing and is held behind the lobe by a removable friction back. A round post in a round hole is an axle: nothing in its shape stops it turning. The only thing resisting rotation is friction, where the front of the earring and its back press against your lobe.

Gravity supplies the turning force. A stud hangs from its post, so if the post isn't at the earring's balance point, the heavier side swings down, and a heart ends up on its side or a cross upside down. (The same physics flips pendants; see why a pendant keeps flipping.) Whether the earring actually turns comes down to how much that off-balance pull outweighs the friction at the lobe.

Why a post ends up off balance:

  • Placed at the visual center, not the weight center: the middle of a heart's outline isn't its balance point, and an initial like J or L carries its weight to one side.
  • Uneven stones: a cluster with its biggest stone off-center, or a bar stud with a stone at one end.
  • Long shapes such as crosses, bars and climbers, where a small error in the post's position acts on a long lever.
  • One of a pair differs: a post set slightly off, or bent, so only one earring turns.

And why the friction side fails: a friction back whose curls have spread, a thin post in a stretched piercing, or a post that has worked loose at its solder joint and turns inside the earring itself.

How to tell what's causing it

  • The balance test. Hold the post level between two fingertips, very lightly, and let the earring settle. If the side that swings down is the side that ends up at the bottom on your ear, the post is off balance.
  • The back test. Try a new back made for that post. If the turning stops, the old back was worn.
  • The post test. Gently try to turn the post. If it turns or wobbles at its base, the joint has failed, and no back will fix it.
  • Compare the pair. Lay both face down. Posts in different places, or one at an angle, explain why only one spins.
  • Turning and tipping forward? See earring backs for heavy, drooping earrings.

Fixes to try at home

  • Seat the back properly. Push a friction back on until it settles into the post's notch and sits close behind the lobe without squeezing it. A back left halfway down the post lets the earring rock and turn.
  • Use a bigger back. Disc or pad backs press on more of the lobe, which adds friction. Soft plastic and silicone grip well at first but stretch with use, so replace them when they loosen.
  • Screw backs on a threaded post can be turned until they're snug against the lobe. They only fit posts that are threaded.
  • Match the metal. The American Academy of Dermatology names earrings and earring backs among the biggest sources of nickel exposure, so choose backs in the same metal as the post.
  • Don't glue, tape or bend. Glue fails and makes a proper repair harder. A post bent to point the earring the right way gets harder and more brittle each time it's bent, and eventually snaps at its base.

What a jeweler can change

  • Move the post to the balance point. Whether it can move depends on what's on the back: a gallery, stones, hollow construction or enamel may sit exactly where the post would need to go. Moving a post isn't a menu item, so it starts with the $19 Mail-In Evaluation, credited in full, with an itemized quote and photos before any work.
  • Add a second point of contact. An omega back is a hinged loop on the earring that swings up and clamps behind the lobe around the post. It braces the earring over a far wider area than a clutch, so it resists turning better: $100 a pair in sterling silver on Earring Back Conversion.
  • Switch to screw backs, which clamp the lobe more firmly than friction backs: $70 a pair in sterling silver.
  • Let it hang instead. Where the earring can take a loop at its top, a leverback turns it into a short drop that hangs the same way up every time: $80 a pair in sterling silver. Not every stud has room for a loop or balances well as a drop, so the jeweler confirms this from the earring before any work; if you're unsure, start with the $19 evaluation.
  • Replace a loose or bent post. Earring Post Repair removes the old post flush, cleans the pad to bare metal and solders or laser-welds a new post on straight, never glued: $30 a pair in sterling silver.

Hoops and huggies that turn

A hoop opens to pass through the piercing, so the whole ring can rotate in the hole; it only shows on a hoop with stones across the front, or a huggie hinged on one side. A huggie that sits close to the lobe has less room to roll than a larger hoop, and turning can't be stopped completely without changing how the hoop is made. If a hinged hoop also flops or keeps opening, its hinge or catch is worn: Hinge Repair starts at $45 for earrings in sterling silver.

What it costs at JewelryRepair.com

Prices from the live repair pages, Nov 18, 2026, per pair unless noted. Each includes a clean and polish and the 1-year workmanship guarantee.

  • Earring Back Conversion in gold: omega $166 in 14K yellow gold ($40 + $55 + $11 + $60), $172 in 14K white or rose gold ($40 + $61 + $11 + $60), $188 in 18K yellow gold ($40 + $55 + $33 + $60).
  • Earring Post Repair: $20 for one earring in sterling silver; $40 a pair in 14K yellow gold ($30 + $6 + $4), or $55 with screwback posts (+$15).
  • Rush: +$50 ships them back 2 to 3 days sooner.

Before you ship

Send both earrings, even if only one spins, so posts and fittings come back matched, and seal the pair and every back you use in a small bag. In your order notes, say which earring turns and which way up it should sit. Shipping is $30 round trip per order by UPS, with the prepaid label in your account; coverage and packing are explained on shipping and insurance.

At the New York studio your earrings are photographed on arrival and before they ship back, and a second jeweler checks the bench jeweler's work. JewelryRepair.com is the mail-in repair service of Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.

Questions

Why do my stud earrings keep turning upside down?
Because the post isn't at the earring's balance point. A stud hangs from its post, and anything hung from one point turns until its center of mass is below that point, so the heavier side swings down. A worn back makes it worse by letting the earring turn freely. A snugger back helps; moving the post to the balance point fixes it, quoted after the $19 Mail-In Evaluation.
Do disc backs stop earrings from spinning?
They help. A disc or pad back presses on more of the lobe, adding friction that resists turning, and it's the cheapest thing to try first. It won't fully stop a stud whose post is well off its balance point, and soft plastic or silicone discs stretch and lose grip over time. For a stud you wear often, an omega or screwback conversion holds better: $100 or $70 a pair in sterling silver.
Can a jeweler move an earring post?
Often, yes, if there's clear metal at the balance point. The jeweler finds that point by hanging the earring, removes the old post flush, refinishes the spot so it doesn't show, and solders or laser-welds a new post, never glue. On a pair, both posts are set to match so the earrings sit alike. At JewelryRepair.com it starts with the $19 Mail-In Evaluation, credited in full, with photos and an itemized quote before any work.
Do screw back earrings spin?
They can, but less. A screw back can be turned until it's snug against the lobe, which clamps the earring more firmly than a friction back. It doesn't change where the post is, so an off-balance stud may still creep round. Screw backs need a threaded post; converting a pair is $70 in sterling silver or $136 in 14K yellow gold ($40 + $55 + $11 + $30) at JewelryRepair.com.
Why does only one of my earrings spin?
Usually because the two aren't identical where it matters. One post may be set slightly off, bent or loose at its base, or one back may be worn. Lay both face down and compare the posts, then swap the backs between them. If the same earring still turns, its post is the problem: Earring Post Repair is $30 a pair, or $20 for one earring, in sterling silver.