Chains & clasps

Earring backs

Stud earring in a holder beside clip, lever and screw backs for conversion

Earring backs are the fittings that keep a pierced earring in the ear. The most common is the friction or butterfly back, a small clutch that grips the post by spring tension. Screw backs thread onto a threaded post, while lever and omega backs are hinged closures built into the earring itself.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

What earring backs are, type by type

Every pierced earring has two halves: the post or wire that passes through the piercing, and the back that stops it sliding out. The back is the part people lose down sink drains, and it is usually the first part to wear.

  • Friction backs (also called butterfly, push-back or scroll backs). A small clutch with two curled tabs that pinch the post. Many posts have a shallow notch near the tip where the tabs settle. Quick to put on, but they rely on spring tension alone.
  • Screw backs. A small nut that threads onto a post cut with a matching thread. Slower to fasten, and a common choice for valuable studs because the back can't simply slide off.
  • Lever backs. A curved ear wire with a hinged lever that snaps shut behind the lobe. The closure is part of the earring, so there is no loose piece to drop.
  • Omega backs. A hinged loop, named for its shape, that swings up around the post and clamps behind the lobe.
  • Clip-ons. No piercing at all: a hinged clip presses the earring against the lobe.

How earring backs wear and fail

Friction backs fail slowly. Each time a back is pushed on and pulled off, its curled tabs open a little, until the back slides along the post with no resistance and a scarf or a phone call is enough to knock the earring out. The post wears too: its notch flattens, and a thin post bends easily, which leaves even a new back with nothing to catch.

Screw threads strip when a back is forced on at an angle. Lever and omega backs fail at the hinge: a worn pin, a tired spring or a bent loop means the closure no longer snaps shut. Stuller, a jewelry findings supplier, describes the lever back's spring-loaded hinge as a precision assembly that binds once its lubrication wears off. Stuller notes that a leverback that has only started to stiffen or bind often just needs a tiny drop of light oil worked into the hinge. If it still won't snap shut, or the pin or loop is worn or bent, the fitting needs replacing, and because it is part of the earring, the fix is new hardware rather than a new back. Heavy drop earrings on friction backs tend to tilt forward, because the clutch grips the post but does nothing to carry the weight.

How to tell what needs fixing

  • The back slides on with no grip, but the post is straight with a crisp notch: only the back is worn. A new pair of backs in the same metal is the simple fix and doesn't need a repair.
  • The post is bent, wobbles at its base, has snapped off or has worn smooth: that's an Earring Post Repair. The old post is removed flush, the pad is cleaned to bare metal and a new post is soldered or laser-welded on.
  • The back works, but you no longer trust the system: an Earring Back Conversion changes the mechanism, for example friction to screwback, or clip-on to pierced.
  • A leverback or omega that still won't snap shut after a drop of oil, or has a worn pin or bent loop: that's also an Earring Post Repair, with Leverback or Omega chosen as the current post style. The worn fitting is replaced with new hardware in your metal: $60 a pair in silver for leverbacks ($30 + $30), $65 for omegas ($30 + $35). More in fixing a leverback earring.
  • A hinged hoop won't close: that's a Hinge Repair, from $45.

Send both earrings when you can, so the posts and backs come back matched. Not sure? Ask in the on-site chat for a free quote or book the $19 Mail-In Evaluation.

Earring backs vs earring posts

People often say "the back is broken" when the post is the real problem, and the two are fixed differently. The earring post is the wire fixed to the earring that passes through your ear; the back is the removable piece behind the lobe. A quick test: push a fresh back onto the post. If it grips and holds, the old back was worn out. If a fresh back still slides, or the post is bent or loose at its base, the post needs work.

Screw backs tie the two together. A screw back only works on a threaded post, so switching from friction backs means replacing the post as well, which is exactly what a conversion does.

Earring backs and sensitive ears

If your ears react to a pair, look at the backs as well as the posts. A gold stud worn with a base-metal back still holds that back against your skin all day, so the back should be the same metal as the post. On gold, platinum or silver earrings, replacement posts and fittings are made in the same metal as the earring. If a plated or fashion pair is what irritates your ears, mention it in the on-site chat before you order, because a new post in the same plated metal may not help.

What it costs here

The configurator shows your exact total before checkout, a clean and polish and the 1-year workmanship guarantee included.

  • Earring Post Repair: $30 a pair in sterling silver with stick posts, or $20 for one earring. In 14K yellow gold a pair is $40 ($30 + $6 gold + $4 for 14K). Screwback posts add $15, wire $20, leverback $30 and omega $35.
  • Earring Back Conversion: $40 in silver to a stick (friction) post; to screwbacks $70 ($40 + $30), leverbacks $80 ($40 + $40) or omega backs $100 ($40 + $60). In 14K yellow gold the friction-post price is $106 ($40 + $55 gold + $11 for 14K), and a screwback conversion is $136 ($106 + $30).
  • Hinge Repair for a hinged hoop: from $45 in silver.

Not sure whether it's the back, the post or the hinge? The Mail-In Evaluation is $19, credited in full toward the repair. Shipping is $30 round trip by UPS per order, however many pairs are in the box. Your earrings are photographed when they reach the New York studio of Sky Jewelry, the family jewelers behind JewelryRepair.com, with over 50,000 repairs since 1989.

Prices at a glance

Service Price What's included
Earring Post Repair from $30 A bent, snapped or worn post, or a hinge-worn leverback, replaced with new hardware in your metal by soldering or laser welding, never glue. Leverback fittings add $30 and omega $35 ($60 or $65 a pair in silver); gold, platinum, screwback and wire posts also add to the price.
Earring Back Conversion from $40 Clip-on to pierced, or a new back style: screwback or wire +$30, leverback +$40, omega +$60. Yellow gold adds $55, white or rose gold $61, plus the karat charge.
Hinge Repair from $45 A hinged hoop that no longer closes: a worn or bent pin replaced, crushed or misaligned knuckles trued or rebuilt, a torn hinge tube re-soldered.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

What are the different types of earring backs?
The main types are friction backs (also called butterfly or push-backs), screw backs, lever backs, omega backs and clip-ons. Friction backs grip a straight post by spring tension, often catching on a small notch near its tip; screw backs thread onto a threaded post; lever and omega backs are hinged closures built into the earring; and clip-ons need no piercing. To switch types, Earring Back Conversion starts at $40 in sterling silver.
Why do my earring backs keep falling off?
Usually because the backs themselves have worn out. Each time a friction back is pushed on and pulled off, its two curled tabs open a little, until they barely pinch the post and a snag can pull the earring free. A new pair of backs in the same metal as the post is the fix, and it needs no repair. If a fresh back still slides, the post is at fault, and Earring Post Repair starts at $30 a pair in silver.
What is the most secure type of earring back?
Screw backs and hinged closures (lever and omega backs) are more secure than friction backs, because they don't depend on spring tension alone. A screw back needs a threaded post, so switching from friction means replacing the post: an Earring Back Conversion to screwbacks is $70 in sterling silver ($40 + $30) or $136 in 14K yellow gold. Leverback and omega conversions add $40 and $60 instead.
Can clip-on earrings be converted to pierced?
Yes. Earring Back Conversion removes the clip mechanism at its mounting point, dresses the surface back to smooth metal and solders on a post for pierced ears. It starts at $40 in sterling silver with a friction post; gold and platinum add a metal charge, and screwback, leverback or omega fittings cost more. Send both earrings so the new posts match.
Can I change the backs on heavy earrings that tilt forward?
Yes. Earring Back Conversion swaps the fitting and leaves the earring itself untouched, and heavy drops that tilt forward on friction backs are one of the most common reasons people book it. In sterling silver, a screwback conversion is $70 ($40 + $30), leverback $80 ($40 + $40) and omega $100 ($40 + $60). A jeweler confirms the plan when the pair arrives, and any change in scope needs your approval first.
Can earring backs cause an allergic reaction?
They can. The American Academy of Dermatology counts earring backs, along with earrings and watches, among the biggest sources of nickel exposure, and points people with a nickel allergy toward nickel-free pieces or metals such as platinum, sterling silver and 18K or higher yellow gold. A gold stud worn with a base-metal back still keeps that back against your skin. On gold, platinum or silver earrings, replacement posts and fittings are made in the same metal.

All glossary terms · Repair questions · How online jewelry repair works

Sources