Jewelry repair questions · Earrings & pendants
Can a loose or broken leverback earring be fixed?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Stiff, or doesn't snap into place: the hinge has probably lost its lubrication. Stuller, a jewelry findings supplier, calls this normal and recommends a small drop of light oil worked into the hinge.
- Springs open with a light push, wobbles or misses the wire: at the bench this usually means a worn spring, catch, hinge pin or wire, and the hardware is replaced under Earring Post Repair, as is a snapped wire.
- Never squeeze the lever tighter with pliers or glue it shut.
Prices
| Service | Price | What's included |
|---|---|---|
| Earring Post Repair | from $60 sterling pair $70 14K yellow gold pair | Choose Leverback as the current post style (+$30). The worn fitting is removed at its mounting point, the surface is cleaned to bare metal, and new leverback hardware in your metal is soldered or laser-welded on, never glued. Laser welding is used when pearls, opals or other heat-sensitive material sit near the joint. One earring is $10 less. |
| Earring Back Conversion | from $80 sterling, to leverback $146 14K yellow gold, to leverback | For French hooks, posts or clip-ons you want changed to leverbacks: the old fitting comes off, the surface is dressed back to bare metal and a leverback is soldered on, with the earring itself left untouched and positioned to hang as designed. |
| Hinge Repair | from $45 | For hinged hoops and huggies, where the hinge is part of the hoop: a worn or bent pin replaced, crushed or misaligned knuckles trued or rebuilt, a torn hinge tube re-soldered. |
| Mail-In Evaluation | $19 | When you can't tell whether the spring, the hinge, the wire or the joint has failed, or the fitting is vintage or unusual: examined under magnification, photos and an itemized quote, credited in full toward the repair. |
Diagnose it in two minutes
Over a towel in good light, close the lever, press it lightly from behind, then give the earring a gentle shake.
- The lever springs open with a light push. At the bench this usually turns out to be a weakened spring or a worn catch, so nothing holds the lever against the wire. This is the failure that loses earrings; stop wearing the pair until it's fixed.
- The lever needs force, or stops halfway. Look from the side: the tip of the wire should land squarely in the lever's notch. If it lines up and still binds, the hinge is probably dry, so try oil first. If the wire sits beside the catch, it has been bent out of true.
- The lever wobbles side to side. The hinge pin or its knuckles have usually worn. That's bench work, and Earring Post Repair replaces the hardware.
- A crack or sharp bend where the wire meets the earring. Wire bent back and forth stiffens and loses ductility (work hardening) and eventually breaks there. Replace it before it snaps.
- The drop fell off but the lever works. The small jump ring joining them has opened; Jump Ring Repair solders it closed, from $19.
- It's a hinged hoop or huggie. The hinge is built into the hoop, so it's a Hinge Repair, from $45; see how to fix a hoop earring that won't close.
How a jeweler replaces leverback hardware
At JewelryRepair.com, your earrings are photographed when they arrive at the New York studio, before anything else. Then:
- Diagnosis under magnification. The jeweler confirms which part failed and checks the second earring too. If the scope changes from what you ordered, you approve it before work begins.
- The old fitting comes off cleanly at its mounting point, and the surface is cleaned to bare metal, including any glue from an earlier home repair.
- New hardware in your metal is positioned so the earring hangs at its designed angle, then soldered or laser-welded on. Laser welding is used when pearls, opals or other heat-sensitive material sit near the joint, since it heats only the joint.
- Heat is kept off the mechanism. Stuller warns that torch work on a spring-loaded finding can anneal (soften) the spring and ruin it, and advises jewelers to remove the hinge pin and lever before soldering, or protect them with heat-sink compound, then re-pin and rivet the hinge so it fits closely without binding.
- Finish and check. The metal is cleaned and polished, with pearls, opals and other delicate material kept off the polishing wheel, and white gold solder work gets rhodium on the repaired area. A second jeweler checks the work, and the pair is photographed again before it ships back with a card naming the jeweler.
Repair, convert or replace the fitting?
- Repair when the earring itself is sound and you like the leverback style: new hardware in your metal, and the earring stays as it is.
- Convert when the closure style is the real problem. French hooks that keep slipping out can get leverbacks, which close behind the lobe; heavy earrings that tip forward may sit better on an omega back, where a post carries the weight and a hinged loop braces it. Earring Back Conversion changes the fitting and leaves the earring untouched.
- Plated and steel pairs start with a free quote: Earring Post Repair lists gold-plated (+$16) and stainless steel (+$20), but plated and steel pieces that need solder work are priced by quote first.
- Vintage or unusual fittings, or a pair where you can't tell how the lever is attached: the Mail-In Evaluation ($19, credited in full) gives photos and an itemized quote before any work.
Can I fix a leverback myself?
One part, yes. If the lever is stiff but lines up, Stuller recommends a small drop of light oil on the hinge, then opening and closing the lever to spread it; the factory lubrication wears off with ultrasonic cleaning, steaming, heat and long use. Wipe away the excess.
Leave the rest to a bench. Squeezing the lever or bending the wire so they meet again rarely lasts: the snap comes from the spring and the shape of the catch, and bending the wire moves where it lands without restoring either. Every bend also work-hardens the wire, so one that has bent once usually deserves replacement. Don't glue anything; glue can't take the open-and-close strain, and residue has to be removed before a proper repair. And stop wearing a pair whose lever opens with a light push, because a failing lever is how the whole earring goes missing.
What it costs at JewelryRepair.com
Prices from the live repair pages, Nov 18, 2026. Each includes a clean and polish and the 1-year workmanship guarantee, and the configurator shows the exact total before checkout.
- New leverback hardware (Earring Post Repair, current post style Leverback), per pair: sterling silver $60 ($30 + $30); 14K yellow gold $70 ($30 + $6 + $4 + $30); 14K white or rose gold $75 ($30 + $11 + $4 + $30); platinum $134 ($30 + $74 + $30). One earring is $10 less, so a single sterling leverback is $50.
- Converting to leverbacks (Earring Back Conversion): sterling silver $80 ($40 + $40); 14K yellow gold $146 ($40 + $55 + $11 + $40); platinum $248 ($40 + $168 + $40).
- A hinged hoop or huggie: Hinge Repair, $45 in sterling silver or $62 in 14K gold ($45 + $11 + $6).
- A drop's jump ring: Jump Ring Repair, from $19. Not sure which part failed: the Mail-In Evaluation, $19, credited in full.
Rush Service ($50) ships an eligible Earring Post Repair back 2 to 3 days sooner. Compare other earring jobs in how much earring repair costs.
Before you ship
- Send both earrings, even if only one is failing, so the new hardware comes back matched, in a small sealed bag with any loose parts.
- Name any pearls, opals or other delicate material in your order note, so the jeweler plans the joint around them.
- Pack the bag in a sturdy, padded small box with nothing on the outside naming the contents, and drop it at any UPS location with the prepaid label from your account. Shipping is $30 round trip per order with $100 of coverage each way; for a pricier pair, see how shipping insurance works.
Your earrings come back in a plain box, signed for at your door, from JewelryRepair.com, the mail-in service of Sky Jewelry: family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.
Questions
Why does my leverback earring keep popping open?
How much does leverback earring repair cost?
Is it OK to oil a stiff leverback?
Can leverbacks with pearl or opal drops be repaired safely?
Can French hook earrings be changed to leverbacks?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list