Chains & clasps

Lever back earrings

Fine torch soldering a new post onto a gold halo stud earring

Lever back earrings hang from a curved ear wire that locks with a small hinged lever. You swing the lever open, pass the wire through the piercing, then press the lever up until it snaps over the tip of the wire behind the lobe. The closure is part of the earring, so there is no separate back to lose.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

How a lever back works

A lever back, also written leverback or lever-back, has three working parts: a curved ear wire that goes through the piercing, a small lever that pivots on a hinge pin at the base of the earring, and a catch where the tip of the wire meets the top of the lever. Swing the lever down and the wire is free to go in or out. Push it up behind the lobe and it closes over the wire's tip while a spring in the hinge holds it shut.

Because the wire and lever form a closed loop through the ear, a lever back can't slide out of the piercing the way an open hook can, and there is no loose back to drop down a drain. That is why the style is common on drops, dangles and small hoops worn every day. Stuller, a jewelry findings supplier, points out that the hinge is made to close tolerances and depends on a trace of lubricant, which wears off with ultrasonic cleaning, steaming, heat and long use.

How lever backs wear or fail

  • The lever won't stay shut. The spring has weakened or the catch has worn, so the lever pops open with a light push. This is the failure that loses earrings.
  • The lever is stiff or binds. The hinge has dried out. Stuller treats this as normal wear, and its fix is a small drop of light oil, worked in by opening and closing the lever.
  • The wire no longer meets the lever. A wire bent out of line misses the catch or needs force to close.
  • A loose or missing hinge pin. The lever wobbles side to side, or falls off entirely.
  • A snapped wire. Wire that has been bent back and forth work-hardens and can snap.

How to tell what's wrong

Close the lever and press gently on it from behind. A healthy lever back resists, clicks home and stays shut when you give the earring a light shake. If it swings open with almost no pressure, the spring or catch is worn. Look at it from the side: the tip of the wire should sit squarely in the lever's catch, not beside it. If the lever is stiff rather than loose, don't force it, which can bend the wire or break the pin; try a tiny drop of light oil worked into the hinge first. If it still binds or won't snap shut after that, the fitting is worn.

Skip the pliers fix. Squeezing the lever or bending the wire to tighten it is a short-term fix: each bend work-hardens the wire, and it can crack at the bend. Never glue a lever shut. Heat matters too: Stuller warns that torch work near the mechanism can anneal the spring and ruin its snap. Here a worn fitting is replaced with new hardware, soldered or laser-welded on and never glued; laser welding puts heat only where the joint is, which is why it is used when pearls, opals or other heat-sensitive material sit nearby. More in leverback earring repair.

Lever backs vs French wires (and omega backs)

A French wire, also called a fish hook, is the open hook found on many drop earrings: the wire passes through the piercing with no closure and relies on its curve and the earring's weight, sometimes with a small plastic or silicone stopper pushed onto the end. It is light and easy to wear, but it can work its way out when you pull off a sweater. A lever back is essentially a French wire with a locking lever added, so converting a favorite pair of fish hooks to lever backs is one fix for earrings that keep going missing. See how to keep fish-hook earrings from falling out.

An omega back is a different hinged closure: a loop, shaped like the Greek letter, that swings up and clips behind the lobe, supporting the earring against the ear while a post carries the weight. It suits larger studs and button earrings; more in omega back earrings. Screw backs thread onto a post instead, and small hinged hoops such as huggies close on themselves. More styles under earring backs and earring post.

What it costs here

Lever-back jobs are priced on the repair page before you pay, in the earrings' own metal (prices from the live repair pages, Nov 18, 2026):

  • A lever back that won't close, wobbles or has snapped: Earring Post Repair, with Leverback chosen as the current post style. The old fitting is removed, the surface is cleaned to bare metal and new hardware goes on. $60 a pair in sterling silver ($30 + $30 for leverback), $50 for one earring, $70 in 14K yellow gold ($30 + $6 + $4 + $30), $75 in 14K white or rose gold ($30 + $11 + $4 + $30) and $134 in platinum ($30 + $74 + $30).
  • A hinged hoop or huggie whose lever is part of the hoop: that is Hinge Repair, from $45 for earrings in sterling silver. See how to fix a hoop earring that won't close.
  • Switching to lever backs from French wires, friction posts or clip-ons: Earring Back Conversion, with the earring itself left untouched. $80 in sterling silver ($40 + $40), $146 in 14K yellow gold ($40 + $55 + $11 + $40), $152 in 14K white or rose gold ($40 + $61 + $11 + $40) and $248 in platinum ($40 + $168 + $40).

A plain broken French wire costs less: Earring Post Repair with a wire style is $50 a pair in silver ($30 + $20). Not sure whether it's the hinge, the wire or the frame? The Mail-In Evaluation is $19, credited in full toward the repair. Shipping is $30 round trip by UPS per order, however many pairs are in the box.

Send both earrings when you can, so the hardware comes back matched; both are photographed on arrival at the New York studio of Sky Jewelry, family jewelers on Lenox Avenue with over 50,000 repairs since 1989, and again before they ship back.

Prices at a glance

Service Price What's included
Earring Post Repair from $60 leverback With Leverback chosen as the current post style: a worn, loose or snapped lever-back fitting replaced with new hardware in your metal, soldered or laser-welded and never glued; laser welding when pearls, opals or other heat-sensitive material sit near the joint. Gold and platinum add a metal charge.
Earring Back Conversion from $80 to leverback With Leverback chosen as the new style: French wires, friction posts or clip-ons changed to lever backs, with the earring itself left untouched and the new fitting placed so the earring hangs at its intended angle. Gold and platinum add a metal charge.
Hinge Repair from $45 For a hinged hoop or huggie whose lever is part of the hoop itself: the failed pin, knuckles or hinge tube diagnosed and repaired so the hoop closes and stays closed.
Mail-In Evaluation $19 Not sure whether it's the hinge, the wire or the earring frame? Examined under magnification, itemized quote with photos, credited in full toward the repair.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

Are lever back earrings secure?
Yes, they are one of the more secure earring styles. The lever closes over the end of the ear wire behind the lobe, so the earring forms a closed loop through the piercing and can't slide out the way an open French wire can, and there is no loose back to drop. They stay secure only while the lever snaps shut firmly; a worn fitting is replaced from $60 a pair in silver.
How do you put on lever back earrings?
Swing the lever down, pass the curved wire through your piercing from the front, then press the lever up behind your lobe until it snaps over the tip of the wire. To take them off, pull the lever down to free the wire and slide the earring out. If the lever won't click shut, don't squeeze it with pliers; a worn fitting is replaced from $60 a pair in sterling silver.
How do you fix a lever back earring that won't close?
Replace the lever-back fitting. A lever that won't stay shut has a worn spring or catch, and bending it with pliers is only a short-term fix, because each bend work-hardens the metal and it can crack. At JewelryRepair.com, Earring Post Repair with a leverback fitting is $60 a pair or $50 for one earring in sterling silver, and $70 a pair in 14K yellow gold, soldered or laser-welded, never glued.
Why is my lever back earring stiff?
Usually the hinge has dried out, and a small drop of light oil, worked in by opening and closing the lever, is the fix Stuller, a jewelry findings supplier, recommends; it treats the stiffness as normal. Don't force a stiff lever, which can bend the wire or break the pin. If it still binds, or the wire misses the catch after oiling, the hardware is worn: new leverbacks are $60 a pair in sterling silver.
Can French wire earrings be changed to lever backs?
Yes. Earring Back Conversion swaps the open French wire for a lever-back fitting and leaves the earring itself untouched. At JewelryRepair.com it is $80 in sterling silver, $146 in 14K yellow gold and $152 in 14K white or rose gold, priced on the repair page before you pay. It is one fix for drop earrings that keep slipping out.
What is the difference between lever back and omega back earrings?
Both are hinged closures, but they suit different earrings. A lever back locks a curved ear wire behind the lobe and is used on drops, dangles and small hoops. An omega back is a hinged loop that clips behind the lobe, supporting the earring while a post carries the weight, and suits larger studs and button earrings. Converting to omega backs costs more here: +$60 versus +$40 for lever backs.

All glossary terms · Repair questions · How online jewelry repair works

Sources