Chains & clasps

Screw back earrings

Stud earring in a holder beside clip, lever and screw backs for conversion

Screw back earrings are pierced earrings whose post is threaded like a tiny bolt, so the back screws on instead of pushing on. The threads hold the back in place until it is turned off again, which is why threaded posts are used on valuable studs, such as solitaire diamonds, to keep them from being lost.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

How screw backs work

On a screw back earring the post isn't smooth. Fine threads run along it, and the back is a small nut with matching threads inside. You turn the back onto the post until it sits snug against the earlobe, and it stays there until you turn it off. A friction back, the familiar push or butterfly back, is held only by the spring of its two curled loops, so a snag on a sweater or a phone can pull it free. A screw back can't be pulled straight off.

That security is why threaded posts are fitted to studs in precious metal or set with valuable stones, such as solitaire diamonds, where losing one would hurt. The cost is convenience: they take longer to put on, and the threads are small enough that a back started at an angle can cross-thread and chew them up.

A second meaning. Older earrings sold as "screw backs" are often not for pierced ears at all. They are screw-on earrings: a U-shaped frame with a small screw that tightens a pad against the lobe. A design of this kind was patented in 1894, and screw fittings for unpierced ears caught on in the 1910s. If an inherited pair has no post, they're screw-ons; our answers on vintage earring backs and converting clip-ons to pierced cover the options.

How screw backs wear or fail

  • Stripped or crossed threads. Forcing a back on crooked flattens the threads on the post or inside the back. The back then spins without tightening, or catches only on the last turn.
  • A bent post. Even a slight bend throws the threads out of line, so the back binds partway down.
  • A spread back. A back that has been squeezed with pliers or stepped on goes out of round and stops gripping.
  • Packed threads. Soap, skin oil and lotion build up in the grooves until the back feels stiff or gritty.
  • A snapped post. Posts take strain where they meet the earring, and a post that breaks there leaves nothing to screw onto.

How to tell whether it's the post or the back

Swap backs. Take the back from the earring that works and try it on the one that doesn't. If the good back catches and tightens, the old back is the problem; if it also spins or binds, the post is. Then look at the post under a magnifier or your phone's zoom: crisp, even ridges are fine, while flattened or shiny stretches of thread mean wear.

Clean first, though. A soft toothbrush and warm soapy water clear packed threads, and plenty of "loose" screw backs turn out to be dirty ones. Never glue a back or a post in place; glue fails, and it makes a proper repair harder.

If the back is the problem, or it's lost: a matching back on its own isn't a menu item here. Ask for a free quote through the contact page or book the $19 Mail-In Evaluation, credited in full toward the repair. If the post is worn too, Earring Post Repair fits a new threaded post, $45 a pair in sterling silver. Our answer on replacing a lost screw back has more.

Screw backs vs push backs (and other secure styles)

Push backs, also called butterfly, scroll or friction backs, slide straight onto a smooth post and are held only by the spring of their curled loops. They go on in a second, and their grip can be adjusted: gently pinching the loops closer tightens them. That grip is also their weak point. As the loops spread with wear the back loosens, and a snag can pull it off without your noticing.

Screw backs fail differently. The back can't be pulled straight off, but threads that are crossed, stripped or packed with grime stop it tightening, and every wear means turning it on and off. A back that won't tighten is a thread problem; a push back that slides off is a loop problem.

The two aren't interchangeable. A screw back needs a threaded post, so earrings with smooth posts can't take screw backs as they are. Earring Back Conversion fits screwback posts in their place, $70 in sterling silver ($40 + $30).

Lever-backs and omega backs are the other secure designs, and small hoops such as huggies use a hinged closure instead. The whole family is covered under earring backs, the post itself under earring post, and our answer on the most secure earring backs compares them.

What it costs here

Both screw back jobs are priced on the repair page before you pay, in the earring's own metal:

  • A stripped or broken screwback post: Earring Post Repair. The old post is removed flush at its pad, the surface is cleaned to bare metal, and a new threaded post is soldered or laser-welded on straight. $45 a pair in sterling silver ($30 + $15 for a screwback post), $35 for a single earring, $55 in 14K yellow gold ($30 + $6 + $4 + $15), $60 in 14K white ($30 + $11 + $4 + $15) and $119 in platinum ($30 + $74 + $15).
  • Switching to screw backs: Earring Back Conversion fits screwback posts in place of the current fitting and leaves the earring itself untouched. $70 in sterling silver ($40 + $30), $136 in 14K yellow gold ($40 + $55 + $11 + $30), $142 in 14K white ($40 + $61 + $11 + $30) and $238 in platinum ($40 + $168 + $30).

Send both earrings when possible so posts and backs match. Not sure what's wrong? The Mail-In Evaluation is $19, credited in full toward the repair. A pair of earrings ships in a small padded box under the prepaid UPS label in your account, $30 round trip per order with $100 of coverage each way, and nothing on the outside names what's inside. The earrings are photographed when they reach the New York studio and again before they ship back. A bench jeweler fits the posts, a second jeweler checks the work, and it carries a 1-year guarantee. Sky Jewelry, family jewelers on Lenox Avenue since 1989, runs JewelryRepair.com, and the family has completed over 50,000 repairs since 1989.

Prices at a glance

Service Price What's included
Earring Post Repair from $30 A new post in your earring's metal, soldered or laser-welded, never glued. Priced per pair; a single earring is $10 less. A screwback post adds $15, so $45 a pair in sterling silver.
Earring Back Conversion from $40 The fitting is changed and the earring itself is left untouched: push backs to screw backs, or a non-pierced fitting to a post. A screwback post adds $30 ($70 in silver); gold and platinum add a metal charge.
Mail-In Evaluation $19 A jeweler photographs the earrings, examines posts, threads and backs under magnification and sends an itemized quote. The $19 is credited in full toward the repair.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

Are screw back earrings more secure than push backs?
Yes. A screw back is held by threads, so a snag can't pull it straight off the way it can a push back; it has to be turned off. The trade-off is that the threads can strip if a back is started at an angle. If yours spin without tightening, a new screwback post is $45 a pair in sterling silver at JewelryRepair.com, soldered or laser-welded, never glued.
Why do my screw back earrings keep coming loose?
Usually the threads are worn, the back has spread, or the grooves are packed with soap and skin oil. Clean them first with a soft toothbrush and warm soapy water, then swap backs between the two earrings to see whether the post or the back is at fault. A worn post is replaced under Earring Post Repair: $45 a pair in silver, $55 in 14K yellow gold.
Can push back earrings be converted to screw backs?
Yes. Earring Back Conversion swaps the existing fitting for a threaded screwback post and leaves the earring itself as it was. At JewelryRepair.com it's $70 in sterling silver, $136 in 14K yellow gold and $142 in 14K white gold, priced on the repair page before you pay. Send both earrings so posts and backs match; shipping is $30 round trip by UPS.
Are vintage screw back earrings for pierced ears?
Often not. Many older pairs sold as screw backs are screw-on earrings for unpierced ears: a small screw tightens a pad against the lobe, and there is no post. A design like this was patented in 1894 and caught on in the 1910s. Earring Back Conversion, which replaces clip and other non-pierced fittings with a post, starts at $40 in sterling silver; for antique pairs, the $19 Mail-In Evaluation confirms it first.
Can a stripped screw back post be fixed?
Yes: a new threaded post is soldered or laser-welded on, never glued. At JewelryRepair.com that's $45 a pair or $35 for one earring in sterling silver, $55 a pair in 14K yellow gold and $119 in platinum. A bench jeweler fits it, a second jeweler checks it, and the work is guaranteed for one year.

All glossary terms · Repair questions · How online jewelry repair works

Sources