Jewelry repair questions · Earrings & pendants

Can clip-on or screw-on earrings be converted to pierced, or pierced to clip-on?

Clip-ons, usually yes. A jeweler removes the clip at its mounting point, smooths the metal and solders on a post placed so the earring hangs as designed; heavy pairs do better with an omega back. At JewelryRepair.com, clip-on to pierced starts at $40 in sterling silver. Screw-on and pierced-to-clip conversions are quoted after a $19 evaluation.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$40clip-on to pierced, sterling silver, stick post
$106the same in 14K yellow gold ($40 + $55 + $11)
$100with omega backs for heavy clips, sterling ($40 + $60)
50,000+repairs since 1989

The short version

  • Clip-on to pierced: a standard conversion. The clip comes off, the metal is smoothed and a post is soldered on in a matching metal, from $40 in sterling silver.
  • Heavy or wide clip-ons: an omega back, a post plus a hinged loop that clamps behind the lobe, carries the weight better than a post alone.
  • Screw-ons for unpierced ears: not a listed fixed-price conversion, so a jeweler looks at how the screw frame is attached and quotes it after a $19 evaluation.
  • Pierced to clip-on: also quoted case by case. Slip-on clip converters are a no-solder alternative.
  • Costume clip-ons cast in pewter or pot metal can't take a soldered post the usual way. Test unmarked pairs first.

Prices

Service PriceWhat's included
Earring Back Conversion from $40The clip mechanism removed cleanly at its mounting point, the surface dressed back to bare, smooth metal, and a new fitting soldered on and positioned so the earring hangs at its intended angle. Stick post at base; screwback or wire +$30, leverback +$40, omega +$60. Gold and platinum add a metal charge.
Mail-In Evaluation $19For screw-ons for unpierced ears, pierced-to-clip requests, and costume or plated clips: a jeweler examines the fittings under magnification and sends an itemized quote with photos. Credited in full toward approved work.
Metal Testing & Verification $15Only if you want a documented result without a repair: hallmarks checked and the metal tested and documented. If you are ordering the conversion anyway, choose "Other / not sure" for the metal and it is tested at no charge.

First, which fitting do you have?

  • Clip-on: a hinged paddle on the back that snaps against the lobe. Wikipedia describes clip-ons as closing around the earlobe and holding by mechanical pressure, and Navette Jewellery's history of earring patents lists clip-on patents from the 1930s.
  • Screw-on, for unpierced ears: a U-shaped frame with a small screw that tightens against the back of the lobe. The same history traces it to an 1894 patent by George Tilford and Arthur Bennett and says it caught on from about 1909. Wikipedia notes ear screws can be adjusted for comfort and are sometimes combined with a clip. Many people search for these as “screw back earrings for non-pierced ears.”
  • Screw back, for pierced ears: despite the shared name, not the same as the screw-ons above. It's a threaded post through the piercing with a nut that screws onto it. If your earrings already have a post, they're pierced earrings.
  • Magnetic: two halves held together by a magnet, made to look like a pierced stud.

Look for a karat or sterling stamp on the earring itself, not only on the clip. A stamp on the clip describes the clip, which may not be original to the earring.

How a jeweler converts clip-ons to pierced

The conversion changes the mechanism and leaves the front of the earring alone. The clip is removed cleanly at its mounting point, and the surface is dressed back to bare, smooth metal so the new fitting is soldered to sound metal rather than to old solder or plating. Then the new fitting goes on: a plain post for pierced ears, or a screwback, wire, leverback or omega fitting if security or support is the goal.

Placement matters as much as the soldering. A clip sits wherever it can grip the lobe, and on many vintage pairs that isn't where a pierced hole would put the earring. The jeweler positions the post so the earring hangs at the angle it was designed to. A jeweler confirms everything on arrival, and if the scope changes, you approve it before work begins.

Weight is the other decision. A clip spreads the earring's weight across a clamp on both sides of the lobe; a post puts all of it on one small hole. For large or heavy clip-ons, an omega back holds the earring against the ear with a hinged loop while the post carries the weight, which keeps it from tipping forward. More on backs for heavy pieces in earring backs for heavy, drooping earrings, and on omega fittings in omega-back earrings.

Fine or costume? Why the metal decides

Gold, silver and platinum clip-ons take a soldered post well. Costume clip-ons are a different story. Some are plated brass, but others are cast in pewter or pot metal, and the numbers don't work in their favor. Jewelry is joined with hard solder, which Wikipedia defines as alloys melting above 450 °C. Pewter melts at around 170 to 230 °C, and pot metal, an unstandardized alloy often based on zinc, comes close to zinc's melting point of about 420 °C; Wikipedia adds that pot metal is not easily glued, soldered or welded. Heat also discolors plating and puts any glued-in stones at risk.

That's why plated and unidentified pairs are quoted before any work. If a pair isn't stamped, choose "Other / not sure" for the metal on the conversion page and the metal is tested at no charge; the standalone Metal Testing service, $15 an item, is for a documented answer without a repair. And if the pair is signed, think before you alter it: Wikipedia notes the main collecting market for vintage costume jewelry is signed pieces, with the maker's mark usually stamped on the back, and a conversion can't be undone. See is costume jewelry worth appraising?

Screw-back earrings for non-pierced ears, and pierced to clip-on

Neither is one of the listed conversion styles, so both start with a look at the earrings rather than a price from the configurator. For a screw-on pair, the jeweler checks how the screw frame is attached and what metal is under it before quoting a post. For pierced to clip-on, the question is whether a clip fitting can go where the post was and still hold the earring at the right angle. Book the Mail-In Evaluation: $19, credited in full toward the work, with an itemized quote and photos. If you decline, the earrings ship back with nothing more to pay, so the most you spend is $49 including the $30 round-trip shipping.

If you'd rather not alter a pierced pair at all, slip-on clip converters that grip the post and clamp the lobe are sold for exactly this and need no bench work. To keep a clip-on pair as clips but make them comfortable, see fixing clip-ons that are too tight, too loose or broken.

What it costs at JewelryRepair.com

Earring Back Conversion prices from the live repair page, Nov 18, 2026. The configurator prices by your earring's metal and the fitting you choose and shows the exact total before checkout. Every conversion includes a clean and polish and the 1-year workmanship guarantee.

  • Sterling silver: stick post $40; screwback or wire $70 ($40 + $30); leverback $80 ($40 + $40); omega $100 ($40 + $60).
  • 14K yellow gold: stick post $106 ($40 + $55 + $11); omega $166 ($40 + $55 + $11 + $60).
  • 14K white or rose gold: stick post $112 ($40 + $61 + $11).
  • 18K yellow gold: stick post $128 ($40 + $55 + $33).
  • Platinum: stick post $208 ($40 + $168).
  • Shipping: $30 round trip per order by UPS, the same however many pairs are in the box, with $100 of coverage each way. For a gold pair worth $800, full-value coverage for both directions is $17.50 (2.5% of the $700 above $100).

Before you ship

Send both earrings together so the new posts match and the pair hangs at the same angle, and add a note if one clip is already broken. Skip the glue-on post pads: they fail under daily pushing and pulling, and the glue must come off before anything can be soldered. Inherited clip-ons are a familiar job for Sky Jewelry, family jewelers on Lenox Avenue since 1989 and the jewelers behind JewelryRepair.com, with over 50,000 repairs since 1989. The pair is photographed on arrival at our New York studio so the front of each earring is on record before the clip comes off; a bench jeweler does the conversion, a second jeweler checks it, and it is photographed again before it ships back in a plain box, signed for at your door.

Questions

How much does it cost to convert clip-on earrings to pierced?
At JewelryRepair.com, Earring Back Conversion starts at $40 in sterling silver with a stick post. In 14K yellow gold it's $106 ($40 + $55 + $11), and omega backs, the most supportive fitting for heavy clips, add $60. Round-trip shipping is $30 per order. The repair page shows the exact total for your metal and fitting before you pay, and the price includes a clean and polish.
Can screw back earrings for non-pierced ears be converted to pierced?
They can be assessed for it. Screw-ons for unpierced ears use a U-shaped frame and an adjusting screw rather than a clip, and that frame isn't one of the listed conversion styles, so JewelryRepair.com quotes it after a look: the $19 Mail-In Evaluation, credited in full, gets you photos and an itemized quote before any work. Mention if the pair is unmarked, so the metal is checked before a post is quoted.
Can pierced earrings be turned into clip-ons?
Sometimes, by replacing the post with a clip fitting, but it isn't a listed fixed-price service, so at JewelryRepair.com it's quoted after a $19 Mail-In Evaluation, credited toward the work. If you'd rather not alter the earrings, slip-on clip converters grip the existing post and clamp the lobe with no bench work, leaving the pair exactly as it was.
Will converting vintage clip-on earrings lower their value?
It can, for collectible pieces. Wikipedia notes the main collecting market for vintage costume jewelry is signed pieces, so if your pair carries a maker's mark, ask a specialist dealer before changing the fittings, because a conversion can't be reversed. For an unsigned or family pair you simply want to wear, conversion is what gets them out of the drawer, from $40 in sterling silver.
Can heavy clip-on earrings be worn as pierced earrings?
Yes, with the right back. A clip spreads the weight across a clamp, while a post puts it all on one small hole, so heavy or wide clip-ons tend to tip forward on a plain post. An omega back adds a hinged loop that holds the earring against the ear while the post carries the weight. Converting to omega backs at JewelryRepair.com is $100 in sterling silver and $166 in 14K yellow gold.
Can costume clip-on earrings be converted?
It depends on the metal. Jewelry hard solder melts above 450 °C, while pewter melts at around 170 to 230 °C and pot metal, often zinc-based, near 420 °C, so pairs cast in those metals can't take a soldered post the usual way. Plated brass is more workable, but heat marks the finish. At JewelryRepair.com, plated and unidentified pairs are quoted before any work, starting with the $19 Mail-In Evaluation.