Jewelry repair questions · Earrings & pendants

I lost my earring back. How do I find a replacement that fits?

Start with the post. A smooth post with a small groove near the tip takes a friction (butterfly) back; a threaded post needs a screw back with the matching thread. Match the post's thickness, often about 0.8 mm, and its metal. If the post is bent or worn smooth, Earring Post Repair at JewelryRepair.com starts at $30 a pair.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

0.8 mmtypical earring post thickness (20 gauge)
$30Earring Post Repair, a pair in sterling silver
$70Earring Back Conversion to screw backs in sterling silver ($40 + $30)
50,000+repairs since 1989

Step 1: work out which post you have

Look at the post in good light, ideally under a magnifier or with your phone's zoom. What you see tells you which back to buy.

  • Smooth post with one or two shallow grooves near the tip: a friction post. The curled tabs of a butterfly back settle into that groove. This is the most common kind on studs.
  • Post with fine spiral ridges along its length, like a tiny bolt: a threaded post for a screw back. Run a fingernail along it and you'll feel the ridges. Screw backs are common on valuable studs because the back can't simply be pulled off.
  • Post with a hinged loop attached to the earring: an omega back. The loop is part of the earring, so there's nothing loose to lose; if it won't clamp, the hinge needs work.
  • Curved wire with a lever that snaps shut, or an open hook: lever backs and French hooks have no separate back. A small plastic or silicone stopper is sometimes added to a hook for security, and it's easy to replace.
  • A designer stud with its own locking back: some makers use a locking system of their own. Ask the maker for the right back before trying a generic one, which may not lock.

Prices

Service PriceWhat's included
Earring Post Repair from $30 a pair (silver)
from $20 single (silver)
A bent, snapped or worn-smooth post removed flush and replaced in your metal by soldering or laser welding, never glue. Gold adds $6 to $11 plus the karat charge; replacing a threaded screwback post adds $15.
Earring Back Conversion from $40A new back system: screwback +$30, leverback +$40, omega +$60, or clip-on to pierced. Yellow gold adds $55, white or rose gold $61, plus the karat charge.
Custom Work & Modifications $10Lost the whole earring, not just the back? A jeweler reviews your photos and quotes matching it before anything proceeds.
Mail-In Evaluation $19Not sure whether it's the back, the post or the earring? Examined under magnification, photographed and quoted; credited in full.

Step 2: match the thickness, the metal and the weight

Post thickness is measured in gauge, and smaller numbers are thicker. A common post on everyday earrings is 20 gauge, about 0.8 mm across; some posts are thicker, about 1.0 mm (18 gauge). A back made for a thin post goes onto a thick one only with a struggle, and one made for a thick post won't grip a thin one. If another pair of your earrings has backs that fit snugly, test one: it should take a little effort to push on and stay put when you tug gently.

Match the metal too. The American Academy of Dermatology names earrings and earring backs among the biggest sources of nickel exposure, and a gold or platinum stud worn with a base-metal back still holds that back against your skin. Its suggested alternatives include surgical-grade stainless steel, 18-, 22- or 24-karat yellow gold, sterling silver and platinum. The simple rule is to buy a back in the same metal as the post.

Then think about weight. A friction back grips the post but doesn't carry any load, so a heavy stud or a drop on a post tends to tip forward on the ear. If that's your pair, see earring backs for heavy, drooping earrings before you buy.

Step 3: choose the replacement back

  • Friction (butterfly) backs: the standard and easiest to find; replace them before the tabs spread and they slide freely.
  • Plastic or silicone backs: comfortable, but they hold by friction alone and can stretch; for nights, see earring backs for sleeping.
  • Screw backs: only for a threaded post with the matching thread; lost one? Read how to replace a lost screw back.
  • Locking backs: catch on the post, but only help if the post itself is straight and sound.

Which of these is most secure for valuable studs is compared in the most secure earring backs.

When it's the post, not the back

A quick test settles it: push a fresh, snug back onto the post. If it grips, the old back was simply worn out and you don't need a jeweler. If a new back still slides off, look for these signs:

  • The post leans, or is bent near the tip.
  • The groove near the tip has worn smooth, so nothing catches.
  • The post wiggles at its base, or there's a fine line where it meets the earring.
  • A screw back won't start, or turns without ever tightening, because the threads are stripped.

Don't straighten a bent post with pliers: every bend work-hardens the metal at that spot, and a post that's been bent back and forth eventually snaps. Earring Post Repair removes the old post flush, cleans the pad to bare metal, and solders or laser-welds a new post in your earring's metal, never glue. To move to a more secure system, Earring Back Conversion fits a new post and back, for example friction to screw back. If the whole earring is gone, see how to replace one lost earring.

What it costs at JewelryRepair.com

Prices from the live repair pages, Nov 18, 2026. JewelryRepair.com doesn't list loose backs on their own; it repairs or converts the earring so a back holds.

  • Earring Post Repair, stick posts: $30 a pair in sterling silver, or $20 for one earring ($30 − $10). In 14K yellow gold, $40 a pair ($30 + $6 + $4); in 14K white or rose gold, $45 ($30 + $11 + $4); in platinum, $104 ($30 + $74).
  • Replacing a threaded screwback post: +$15, so a pair in sterling silver is $45 and in 14K yellow gold $55 ($40 + $15).
  • Earring Back Conversion: $40 in silver to a friction post, or $70 to screw backs ($40 + $30). In 14K yellow gold, $106 ($40 + $55 + $11), or $136 with screw backs ($106 + $30). Leverbacks add $40 and omega backs $60.
  • Lost the whole earring: Custom Work & Modifications starts with a $10 estimate. Nothing ships until a jeweler has reviewed your photos and quoted the work.

Send both earrings when possible so the posts and backs come back matched; the $30 round-trip UPS shipping is per order, however many pairs are in the box. Each price includes a clean and polish and the 1-year workmanship guarantee. Posts are small enough that intake and return photos matter: your earrings are photographed on arrival and before they ship back, so you can see each post before and after. JewelryRepair.com is the mail-in service of Sky Jewelry, family jewelers on Lenox Avenue since 1989 with over 50,000 repairs since 1989.

Questions

Are earring backs universal?
No. Friction (butterfly) backs fit most standard posts of the same thickness, usually about 0.8 mm, but a back made for a 1.0 mm post won't grip a thinner one well. Screw backs only fit a threaded post with the matching thread, and some designer studs use their own locking backs, so ask the maker for those rather than trying a generic one.
Can I use an earring back from another pair?
Usually, if both pairs use friction backs on posts of the same thickness. Match the metal too, because the back sits against your skin and a base-metal back can cause a nickel reaction even on a gold stud. A friction back won't hold on a threaded post that was made for a screw back, and a back that's already loose on its own pair will be loose on yours as well.
Why does my earring back keep falling off?
Either the back has spread or the post has worn. Friction backs loosen a little each time they're pushed on and pulled off, and a new back fixes that. If a new back also slides, the post's groove has worn smooth or the post is bent, which is a job for Earring Post Repair rather than another back. Converting to screw backs is the more secure long-term fix.
What can I use if I lost my earring back and have no spare?
In a pinch, a back from another pair or a small piece of pencil eraser will hold a light, inexpensive stud for a few hours, but neither is secure: an eraser tears and slips, and neither grips a threaded post. Take diamond or gold studs out and keep them in a closed box until the right back arrives. If the piercing is new, ask your piercer before leaving the earring out.
Can I wear stud earrings without backs?
Not safely. A stud's post simply passes through the piercing, and the back is what holds it in, so without one the earring can slide out and be lost. Earrings with their own closure, such as lever backs, omega backs and hinged hoops, don't need a separate back, which is one reason some people convert valuable studs to a different back system.