Repair questions · Watches

Which watch battery is equivalent to an SR626SW (377)?

An SR626SW and a 377 are the same battery: a 1.55-volt silver-oxide cell 6.8 mm across and 2.6 mm tall, also coded SR66 and V377. The 376 is its high-drain twin. A 364 is thinner and an AG4 is alkaline, so neither is a true match. At JewelryRepair.com, the Watch Battery & Pressure Check by mail starts at $30.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

6.8 × 2.6 mmSR626SW / 377, a 1.55-volt silver-oxide cell
$30round-trip UPS shipping per order, prepaid label in your account
$30Watch Battery & Pressure Check, most brands
50,000+repairs since 1989 by Sky Jewelry's family of jewelers

The short version

  • Exact equivalents of the SR626SW: 377 (Energizer, Rayovac and Renata), D377 (Duracell), V377 (Varta), SB-AW (Seiko), 280-39 (Citizen) and SR66, the short IEC designation for the same cell.
  • Same size, different job: the 376 (SR626W) is the high-drain version.
  • Not equivalents: the 364 is 2.15 mm tall instead of 2.6; the AG4 is alkaline; a CR cell is 3-volt lithium; an MT621 is rechargeable.
  • Match the chemistry letter and size digits exactly. For the drain suffix, a W (high-drain) cell can replace an SW cell, but not the other way round. The code on your old cell is the best guide.

Prices

Service PriceWhat's included
Watch Battery & Pressure Check from $30The cell your movement specifies, gasket inspected, case pressure-checked. Most brands $30.
Water-Resistance Pressure Test from $175Documented test against the depth rating, for a watch you swim with.
Watch Overhaul from $295 mechanical
from $195 quartz
When a fresh cell doesn't fix it: $195 for a quartz watch, most brands.
Mail-In Evaluation $19For a motion-charged (MT rechargeable cell) watch or an unclear fault; credited in full. Solar cells are booked as the battery service's solar option, $115 for most brands.

How to read a watch battery code

Watch cells follow the IEC 60086-3 coding system, and each part of the code means something:

  • First letter, the chemistry. S is silver oxide at 1.55 volts, L is alkaline at 1.5 volts and C is lithium at about 3 volts.
  • R means round.
  • The digits are the size. The first one or two give the diameter in whole millimeters, rounded down; the last two give the height in tenths of a millimeter. SR626 is 6.8 mm across and 2.6 mm tall; SR927 is 9.5 mm by 2.7 mm.
  • The suffix is the drain. SW is the low-drain type for quartz watches without a light, alarm or chronograph; W is the high-drain type.

Numbers like 377 or 395 are makers' part numbers; SR66 is the short IEC designation for the same cell. The SR626SW glossary entry covers that cell in depth.

Cross-reference: common watch battery sizes

Every pairing below appears on both Murata's watch battery selection guide and Maxell's cross-reference guide. All are 1.55-volt silver-oxide cells, sized diameter by height:

  • SR516SW = 317: 5.8 × 1.65 mm
  • SR521SW = 379: 5.8 × 2.15 mm
  • SR616SW = 321: 6.8 × 1.65 mm
  • SR621SW = 364: 6.8 × 2.15 mm
  • SR626SW = 377, high-drain SR626W = 376: 6.8 × 2.6 mm
  • SR721SW = 362, SR721W = 361: 7.9 × 2.1 mm
  • SR726SW = 397, SR726W = 396: 7.9 × 2.6 mm
  • SR41SW = 384, SR41W = 392: 7.9 × 3.6 mm
  • SR916SW = 373: 9.5 × 1.65 mm
  • SR920SW = 371, SR920W = 370: 9.5 × 2.05 mm
  • SR927SW = 395, SR927W = 399: 9.5 × 2.7 mm
  • SR936SW = 394: 9.5 × 3.6 mm
  • SR1120SW = 381: 11.6 × 2.05 mm
  • SR1130SW = 390: 11.6 × 3.05 mm
  • SR44SW = 303, SR44W = 357: 11.6 × 5.4 mm

SR41 and SR44 are older names that don't follow the size rule; their size-coded IEC names are SR736 and SR1154.

Two alkaline codes come up often too. GP's datasheets list its 177 as LR626 or AG4 (6.8 × 2.6 mm) and its 164 as LR621 or AG1 (6.8 × 2.15 mm): alkaline cells in the 377 and 364 sizes.

Close, but not equivalent

  • A 364 for a 377. Same 6.8 mm diameter, but 0.45 mm thinner (2.6 − 2.15), so it isn't the size the movement specifies.
  • An AG4 or LR626 for an SR626SW. Same size, different chemistry. GP rates its alkaline 177 at 12 mAh; Energizer rates its silver-oxide 377 at 24 mAh, twice as much, even though GP measures down to a lower 1.0-volt cutoff than Energizer's 1.2. Silver oxide also holds a much flatter voltage until it drops at the end of its life, where alkaline cells give less stable voltage.
  • A CR cell for an SR cell. CR cells are lithium at about 3 volts, nearly twice the 1.55 volts of silver oxide. A watch built for a CR1216 (12.5 × 1.6 mm on Maxell's chart) takes another CR1216, but a CR cell never stands in for an SR cell.
  • An MT621 for an SR621SW. Panasonic's MT621 is a 1.5-volt rechargeable manganese-titanium cell, 6.8 × 2.1 mm, charged at 1.8 to 2.6 volts by the device it sits in. It belongs only in a watch built to recharge it; it's not a swap either way.

The cell is the easy part: the seal

A fresh cell is the cheap part of a battery change. The risk is the seal: opening the case back disturbs the gasket that keeps water out, and a battery swap that lets moisture in costs far more than the battery. At JewelryRepair.com, the Watch Battery & Pressure Check starts with the case back opened using the correct tool for a screw-down or snap back. The old cell comes out, the contacts and movement are inspected, and a cell of the exact size the movement specifies goes in. The gasket is inspected, cleaned and re-seated, or replaced if it has flattened, and the case is pressure-checked before it's sealed.

Battery changes are done at Sky Jewelry's New York studio, where the family jewelers on Lenox Avenue have handled over 50,000 repairs since 1989, and a second jeweler checks every reseal. If you swim with the watch, the separate Water-Resistance Pressure Test is a documented test against the depth rating; what water-resistance ratings mean explains yours.

What it costs at JewelryRepair.com

The Watch Battery & Pressure Check is $30 for most brands. A short list of brands carries a surcharge, from $15 for Omega or Cartier up to $200 for Rolex, shown before checkout; the watch battery cost guide lists them all. A two-battery movement adds $30 ($60 for most brands), a solar battery $85 ($115) and a new case back gasket $25 ($55). A battery job comes back in about two weeks door to door.

If a fresh cell doesn't wake the watch, you get photos and an itemized update before anything more is done; a quartz Watch Overhaul is $195 for most brands. Shipping is $30 round trip by UPS per order, with the prepaid label in your account after checkout. If the watch is still under the maker's warranty or a service plan, check with the maker first, because outside service can void it. Battery and watch brand names on this page identify cell sizes and watches only: JewelryRepair.com is an independent repair service, not affiliated with any of them.

Questions

Can I use a 376 battery instead of a 377?
Yes, in most quartz watches. Both are SR626 silver-oxide cells, 6.8 × 2.6 mm at 1.55 volts. The 376 is the W type, which the IEC suffix convention rates as high drain for all quartz watches; the 377 is the SW type, meant for watches without a light, alarm or chronograph. The swap to avoid is the reverse: a 377 where the old cell was a 376.
What battery is equivalent to an SR920SW?
The 371. Both Murata's and Maxell's charts list the SR920SW as the 371, a 9.5 × 2.05 mm silver-oxide cell, and its high-drain version, the SR920W, as the 370. Don't confuse it with the SR927SW, sold as the 395: same diameter, but 2.7 mm tall. The SR927W is the 399.
What battery is equivalent to an SR621SW?
The 364. Murata's and Maxell's charts both list the SR621SW as the 364, a 1.55-volt silver-oxide cell 6.8 mm across and 2.15 mm tall. It is 0.45 mm thinner than the 377, so the two are not interchangeable. Don't use an MT621 either: Panasonic's MT621 is a rechargeable manganese-titanium cell that belongs only in a watch built to charge it.
Can I use an LR626 (AG4) instead of an SR626SW?
It fits, but it isn't a true match. GP's datasheet lists its 177 as LR626 or AG4, the same 6.8 × 2.6 mm size as the 377, but it is an alkaline cell at 1.5 volts. GP rates it at 12 mAh against Energizer's 24 mAh for the silver-oxide 377, on different test loads, and alkaline voltage is less steady. Use the SR626SW code your movement specifies.
Can a CR927 replace a 395 battery?
No. A CR927 and a 395 (SR927SW) share a 9.5 × 2.7 mm footprint, but the CR927 is a lithium cell at about 3 volts and the 395 is silver oxide at 1.55 volts. A watch is built for one or the other, so the replacement has to match the code of the original cell, not just its size.
Can I replace an SR626SW battery myself?
You can, but the cell is the easy part. Closing a snap-on back takes a case press with the right die, and forcing it by hand can damage the case or crystal; the gasket also has to be clean and seated, or water gets in. A watch that was water resistant needs a pressure check after any opening; ours is included in the $30 Watch Battery & Pressure Check for most brands.