Repair questions · Earrings & pendants

Can a broken or loose tie clip or tie bar be fixed?

Usually, yes. Tie clips fail in a few places: a slide bar that no longer grips, a loose hinge pin, a tired spring or a bent jaw, and on tie tacks a lost clutch or bent post. At JewelryRepair.com, hinge pin problems are Hinge Repair from $45; anything else starts with a free photo quote or $19 evaluation.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$45Hinge Repair for a hinged tie clip, sterling silver
$19Mail-In Evaluation for a tired spring, a bent slide bar or a tie tack, credited in full
$30round-trip UPS shipping per order, with $100 of coverage each way
50,000+repairs since 1989 by Sky Jewelry's family of jewelers

The short version

  • Most metal tie clips can be fixed. They fail at the grip, the hinge, or the back of a tie tack.
  • A slide bar that slips has been opened past its spring; it can often be re-tensioned.
  • A hinged clip that flops has a worn pin, crushed knuckles, a torn hinge tube or a tired spring.
  • Heat is the catch: soldering softens the metal that gives a clip its spring.
  • At JewelryRepair.com: hinge pin and knuckle problems are Hinge Repair, from $45; everything else starts with a free photo quote or the $19 Mail-In Evaluation, credited in full.

Prices

Service PriceWhat's included
Hinge Repair from $45For a hinged tie clip whose pin has worked loose, whose knuckles (the small tubes the pin runs through) are crushed or out of line, or whose hinge tube has torn away from the bar: the pin replaced with new wire, the knuckles trued or rebuilt, the tube re-soldered. Book it with the item type "Something else". If the jeweler finds the fault is the spring rather than the hinge, you're told and quoted before any work. Sterling silver $45; 14K gold $62 ($45 + $11 + $6).
Mail-In Evaluation $19For everything that isn't a hinge: a spring that has lost its grip or snapped, a slide bar that is bent or cracked at the fold, a tie tack's post or clutch, a loose stone. A jeweler examines the whole piece under magnification and sends photos and an itemized quote; approve all, some or none. Credited in full.
Metal Testing & Verification $15For an unmarked vintage tie bar or tack you want a written metal result for on its own. If you're booking a repair, choose "Not sure" for the metal and it's tested at no charge.
Custom Work & Modifications $10Turning a tie tack or an heirloom tie bar you no longer wear into a pendant or another piece: a jeweler reviews your photos and quotes the work line by line before anything proceeds. Existing gold can be reused or credited.

How tie clips are built, and where each type breaks

A tie clip holds the tie to the shirt front so it hangs straight; clips gained prominence in the 1920s and largely replaced the older tie pin. A few different mechanisms do that job, and each wears out its own way:

  • Slide bars. One strip of metal folded back on itself, so the fold is the spring. Pushed over a thick knit tie, or the tie and shirt placket together, the arms open past their elastic limit and stay open, so the bar gapes and slides down.
  • Hinged clips. Two parts joined by a hinge pin, with a small spring holding the jaws shut. The pin wears or walks out, the knuckles get crushed or out of line, the hinge tube tears away from the bar, or the spring tires. Erhard Brepohl's Ganoksin lesson on special repair work names springs that lose their tension over the years as a common repair.
  • Toothed or alligator clips. A hinged clip with gripping teeth that bend or flatten.
  • Tie tacks and tie pins. A decorated face on a post through the tie, held by a clutch or a small bar on a chain. The clutch gets lost, the post bends or snaps where it meets the face, or the chain breaks. Tie pins date to the early 19th century and often carried pearls and gemstones set in gold, so family pins are often old and jeweled.
  • The face. Monograms, enamel, inlay and set stones loosen, chip and crack just as they do on cufflinks.

How a jeweler fixes each one

The repair follows the failure, and with clips the order of work matters, because the part that holds the tie is a spring.

  • Re-tensioning a slide bar or a tired spring. Brepohl's lesson says springiness can sometimes be renewed simply by bending parts into tighter curves. The jeweler closes the arms in small, controlled steps until the clip grips again, without creasing the fold.
  • A loose or missing hinge pin is replaced with new wire; crushed knuckles are trued or rebuilt; a hinge tube torn from the body is re-soldered.
  • Keeping heat away from the spring. Soldering heat anneals, or softens, metal, undoing the hardness that lets it spring back. The same lesson advises removing a brooch's pin before its joint is re-soldered so the pin isn't annealed, and the same logic applies to a clip's spring and hinge pin. It's also why a slide bar cracked at its fold isn't simply soldered: a softened fold won't grip.
  • A laser weld instead of a torch. In Ganoksin's report on laser welders, one jeweler says the laser heats only the target area, and another says they can work as close as half a millimeter from heat-sensitive stones. Where it suits the piece, a point weld keeps the rest of the clip springy.
  • Stones and enamel first. Brepohl notes that stones on the front of a brooch come out before soldering; a jeweled tie bar is treated the same way. Pearls, onyx, enamel and mother-of-pearl all change the plan.
  • Tie tacks. A bent post is straightened once or replaced, a snapped post rejoined to the face, and a lost clutch replaced with one that grips the post firmly.

Is it worth fixing?

  • Gold, silver and platinum clips: almost always; a hinge repair costs far less than a new precious-metal tie bar.
  • Heirlooms, monograms and insignia: yes. The face is the part that matters, and it's rarely the part that broke.
  • Plated base-metal bars: sometimes not. Plated pieces that need solder work or polishing go to a quote, and a new bar may cost less.
  • Not sure what it's made of? When you book a repair, choose "Not sure" for the metal and it's tested at no charge. Metal Testing & Verification, $15 per item, is for a written result on its own.
  • Designer and branded clips: JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by any jewelry brand. If a clip is under its maker's warranty or service program, check with the maker first, because outside work can void it.
  • A tie tack you'll never wear again can become a pendant through Custom Work & Modifications, from a $10 estimate. See also cufflink repair.

Can I fix a tie clip myself?

  • A slide bar that has opened slightly can sometimes be closed by hand: press the arms together gently, a little at a time, and test the grip. Stop if you see a crease or hairline crack at the fold.
  • Don't bend it back and forth. Each bend hardens the metal and makes it less ductile, so a fold or post bent repeatedly eventually cracks.
  • Don't glue a hinge, a post or a clutch. Glue lets go without warning, and the residue has to come off before a proper repair.
  • Don't heat it. A torch or soldering iron anneals the spring and can ruin plating, enamel and stones.

What it costs at JewelryRepair.com

Prices from the live repair pages, Nov 18, 2026. Every repair includes a clean and polish and the 1-year workmanship guarantee.

  • Hinge Repair for a hinge pin, knuckle or hinge tube problem, booked with the item type "Something else": $45 in sterling silver; 14K gold $62 ($45 + $11 + $6); 18K gold $76 ($45 + $11 + $20); platinum $140 ($45 + $95). If the spring is involved, start with the evaluation instead.
  • Everything else, such as a tired or broken spring, a bent or cracked slide bar, or a tie tack's post or clutch: a free photo quote through the contact page or the on-site chat, itemized within 1 business day, and nothing ships until you've seen the price. Or book the $19 Mail-In Evaluation, credited in full; if you decline its quote, the clip ships back with its photos and findings and nothing more to pay, because the $30 round trip already covers the return.
  • A broken tie chain: Chain Soldering, from $30 for one break in sterling silver.

Before you ship

Send the whole clip, with any loose parts (the pin, the spring, a clutch, a stone) sealed in a small bag in the same box, and say in the order note what it does: "slips down the tie", "jaw won't close". Matching cufflinks can travel in the same box: shipping is $30 round trip per order by UPS, with the prepaid label in your account; coverage is explained on shipping and insurance.

At the New York studio the clip is photographed on arrival and before it ships back, and a second jeweler checks the bench jeweler's work. JewelryRepair.com is the mail-in repair service of Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.

Questions

How do you tighten a loose tie clip?
It depends on the type. A one-piece slide bar is re-tensioned by closing its arms in small, controlled steps so the fold grips again; a hinged clip that has gone slack needs its spring or hinge pin dealt with. Don't bend a slide bar back and forth, which hardens the fold until it cracks. At JewelryRepair.com, a loose hinge pin or crushed knuckles are Hinge Repair from $45, and a tired spring starts with the $19 evaluation, credited in full.
Can the spring in a tie clip be replaced?
Often, but it's judged in hand. A spring that has lost tension can sometimes be re-tensioned, and one that has snapped may be replaced if the clip's construction allows it. Heat near the spring has to be controlled, because annealing softens it. At JewelryRepair.com a spring repair isn't a set-price item, so it starts with a free photo quote or the $19 Mail-In Evaluation, credited in full toward the work.
Can a bent tie bar be straightened?
Usually, once. A bar bent sideways or a jaw pushed out of line can be worked back into shape, but each bend work-hardens the metal and lowers its ductility, so a bar that has been bent and straightened several times may crack at that spot. A crack at a slide bar's fold is harder to fix, since soldering softens the spring. At JewelryRepair.com, a bent bar starts with the $19 Mail-In Evaluation, credited in full.
I lost the back of my tie tack or tie pin. Can it be replaced?
Usually, yes. The new clutch has to fit the post's thickness and grip it firmly, and on a chain-style tack the small bar and its chain can be repaired too. If the post is bent or worn smooth, so the pin won't stay in, it's straightened or replaced first. At JewelryRepair.com, send photos for a free quote through the contact page or chat, or book the $19 Mail-In Evaluation, credited in full.
Can a tie clip be soldered?
Yes, but not just anywhere. A solder joint is fine on a hinge tube, a post or a decorative face, but soldering heat anneals metal, and an annealed fold or spring no longer grips. That's why bench jewelers take a brooch's pin out before re-soldering its joint, and the same care applies to a clip's spring and hinge pin. A laser weld, which heats only the target area, is often better near a spring.