Jewelry repair questions · Rings & sizing

Can a ring that was cut off be repaired?

Usually, yes. A gold, silver or platinum ring cut off at the hospital can be closed, joined with matching metal and refinished, and the Merck Manual notes that a jeweler can usually repair rings cut in one or more places. At JewelryRepair.com, Shank Repair fixes an ER cut by mail from $45 in silver and $57 in 14K yellow gold.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$45Shank Repair for an ER cut in sterling silver
$57the same repair in 14K yellow gold ($45 + $7 + $5)
$70closed one size larger in 14K yellow gold under Ring Resizing ($45 + $5 + $13 + $7)
1 yearworkmanship guarantee, including a joint that reopens

The short version

  • Yes for gold, silver and platinum. A cut is repaired like a crack: closed, joined with matching metal and refinished until it disappears. Shank Repair covers ER cuts, from $45.
  • Two cuts are fixable too. When a ring is too tight to spread open, emergency staff may cut it a second time, opposite the first. Each cut becomes a joint.
  • Bent open is normal. The cut ends are pried apart to get the ring off, and closing the band true is part of the repair.
  • If your size has changed, the ring can be closed at a new size under Ring Resizing instead.
  • Tungsten carbide and ceramic are the exception. They're cracked off rather than cut, and a broken tungsten band is replaced, not rejoined.
  • There's no deadline. A cut doesn't get worse in a drawer, so the ring can wait in a small bag until you're ready, as long as every piece stays with it.

Prices

Service PriceWhat's included
Shank Repair from $45An ER cut cleaned, the band closed true and joined (laser near stones, torch where the piece allows), then refinished. $45 silver, $57 14K yellow, $64 14K white or rose, $439 platinum, $76 stainless steel. Bands 4mm and wider +$40.
Ring Resizing from $45When the ring should come back a different size. Size down from $45 in silver; one size up $50 in silver ($45 + $5) or $70 in 14K yellow gold; +$35 for each further full size up.
Mail-In Evaluation $19For a ring cut in several places, bolt-cut or crushed, or an unknown metal: examined, photographed and quoted item by item. Credited in full.
Custom Work & Modifications $10When a ring was crushed beyond saving: a remake quoted before anything proceeds, with your gold and stones reused or credited.

What happened to your ring at the hospital

How a ring comes off decides what the jeweler receives. The Merck Manual's procedure for clinicians describes the standard method:

  • A manual ring cutter. A small hook, the guard, slides under the band to protect the finger, and a saw-toothed wheel cuts through the ring a little at a time.
  • Spreading. The cut ends are spread apart with a large hemostat or pliers so the ring slides off. Expect a ring that's open and out of round.
  • A second cut. If the band is too tight to spread, another cut is made 180° from the first, so the ring comes off in two halves.
  • Hard metals. For steel, cobalt and titanium, Merck recommends a powered saw, or a bolt cutter if none is available. A bolt cutter pinches through metal rather than sawing it, so those ends may be deformed.
  • Brittle materials. Tungsten and ceramic rings are cracked with vise grips instead, and they may shatter, so there may be no clean ends to rejoin.

The reason the ring came off matters too. Wikipedia's article on tungsten carbide gives the typical case: a hand injury with swelling. A ring caught in an accident may have been bent or crushed before anyone cut it, so the jeweler examines the whole band, not only the cut.

How a jeweler repairs a cut ring

At the JewelryRepair.com studio in New York, an ER cut is handled the same way as a crack in the band:

  • Photographed and examined. The ring is photographed on arrival, before any work, then checked under magnification: the cut, the rest of the band and every stone.
  • Closed true. The band is brought back to round on a steel mandrel, working in small steps so the metal isn't stressed twice in opposite directions, and the cut ends are cleaned and brought together.
  • Joined. The seam is laser-welded where stones or delicate details sit near the cut, and soldered by torch where the piece allows.
  • Stones checked. Prying a ring open bends it, and a bent shank pulls at the settings above it, so every stone is tested for tightness. A loose one can be secured with Stone Tightening, from $50.
  • Refinished. The band is polished until the repair can't be seen, and white gold gets fresh rhodium over the repaired area.
  • Checked twice. A second jeweler checks the work, and the ring is photographed again before it ships back.

A saw cut has width, so a thin sliver of metal is gone where the wheel passed. Give your size in the order (the Shank Repair page asks for it); if your finger has changed size since, book Ring Resizing instead, as below.

If the ring no longer fits: closing it at a new size

Rings come off in the ER because a finger has swollen, and sometimes the finger settles at a different size afterward. You don't have to repair the old size and then resize: a cut ring that needs a new size can be closed at that size under Ring Resizing, which adds sizing stock matched to the ring's karat and color when it goes up.

  • Same size: Shank Repair, from $45.
  • Smaller: Ring Resizing from $45 in silver, $65 in 14K yellow gold ($45 + $13 + $7).
  • One size larger: $50 in silver ($45 + $5), $70 in 14K yellow gold ($45 + $5 + $13 + $7), $81 in 14K white gold ($45 + $5 + $24 + $7).
  • Two sizes larger: each full size beyond the first adds $35, so $105 in 14K yellow gold.
  • Wide or eternity bands: 4mm and wider adds $46 on Ring Resizing, eternity style $250.

If your finger is still changing, wait: the ring is fine in its bag. When you're ready, see how to find your ring size at home, and if the ring now has to pass a larger knuckle, ring options for large knuckles.

Rings that can't simply be rejoined

  • Tungsten carbide and ceramic. These are cracked off rather than cut, and Wikipedia notes tungsten carbide can shatter. A broken tungsten band isn't rejoined at the bench; it's replaced. See can a cracked tungsten ring be repaired.
  • Titanium. All welding of titanium has to be done in an inert atmosphere of argon or helium, and titanium isn't a metal choice on the Shank Repair page. Send photos for a free quote through the contact page, or book the $19 Mail-In Evaluation, credited in full toward the repair; no fix is promised until a jeweler has seen it.
  • Stainless steel. It is on the list: $76 for a cut ($45 + $31). If it was bolt-cut and the ends are crushed, the jeweler confirms the scope before any work.
  • Gold-plated or fashion rings. Not on the Shank Repair metal list. Ask for a free quote, or book the $19 Mail-In Evaluation, credited in full toward the repair. Replacing an inexpensive ring can cost less than repairing it.
  • A ring crushed in the injury. If it can't be brought back to round, Custom Work & Modifications starts with a $10 estimate to remake it, and the existing gold and stones can be reused or credited.

Before you ship a cut ring

  • Keep every piece together: both halves if it was cut twice, and any stone that fell out, sealed in a small bag inside the package.
  • Don't squeeze it closed. Bending metal back and forth work-hardens it, leaving it harder but less ductile and likelier to crack.
  • Don't wear it open, glue it or tape it. The cut ends catch on fabric, and glue makes no metal bond; it has to be cleaned off before a proper repair.
  • Cover its value. $100 of coverage is included each way. Full value up to $10,000 costs 2.5% of the value above $100, one fee for both directions, so a $2,500 ring costs $60 to cover.
  • Use the prepaid label. It's ready in your account within minutes of ordering. Pack the ring in a plain, sturdy box with nothing outside naming the contents and drop it at any UPS location; a signature is required on delivery both ways.

JewelryRepair.com is the mail-in repair service of Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989. A bench jeweler does the work, a second jeweler checks it, and the 1-year workmanship guarantee covers it.

Questions

How much does it cost to fix a ring that was cut off?
At JewelryRepair.com, repairing an emergency-room cut is $45 in sterling silver, $57 in 14K yellow gold, $64 in 14K white or rose gold and $439 in platinum under Shank Repair. Bands 4mm and wider add $40. Every price includes a clean and polish and the 1-year workmanship guarantee, and shipping is $30 round trip per order by UPS.
Can a ring that was cut in two places be fixed?
Usually, yes. The Merck Manual notes that a jeweler can usually repair rings cut in one or more places; a second cut is made opposite the first when the band is too tight to spread. Each cut becomes a joint to close and finish. Tell us about the second cut through the on-site chat or the contact page, and if the job differs from what you booked, you approve any change before work begins.
Can a ring be resized when the cut is repaired?
Yes. A cut ring that needs a new size can be closed at that size under Ring Resizing instead of Shank Repair. Sizing down starts at $45 in silver; sizing up one size is $50 in silver or $70 in 14K yellow gold, and each further full size adds $35. Order the size your finger is now, not the size the ring used to be.
Will I be able to see where my ring was cut?
Usually not. The joint is closed with matching metal, then the band is trued round and polished until the repair can't be seen, and white gold gets fresh rhodium over the repaired area as part of the job. Engraving or a hammered texture running across the cut is harder to blend, so mention it through the on-site chat or the contact page before you ship.
Can a tungsten ring that was cut off be repaired?
No. Tungsten carbide is very hard and brittle, so instead of cutting it, emergency staff can crack it off with vise grips (Merck Manual), and the material can shatter. A broken tungsten band isn't rejoined at the bench and isn't on the Shank Repair metal list, so it has to be replaced. Gold, silver, platinum and stainless steel rings can be rejoined.
How long can I wait before repairing a ring that was cut off?
As long as you need. A cut doesn't get worse in a drawer, so a ring kept in a small bag with all its pieces can be repaired months or years later. Don't squeeze it closed in the meantime, since bending work-hardens the metal. When you're ready, the repair page shows a back-by date before you pay; most repairs take about three weeks door to door.