Jewelry repair questions · Rings & sizing

Can a broken or cracked ring be fixed?

Usually, yes. A cracked, snapped or cut wedding band or engagement ring in gold, silver or platinum can be soldered or laser-welded with matching metal, trued round and polished so the join doesn't show. A band worn paper-thin needs new metal instead: a half or full new shank. JewelryRepair.com repairs a cracked or cut band by mail from $45.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$45Shank Repair: a cracked or cut band in sterling silver
$57the same repair in 14K yellow gold ($45 + $7 + $5)
$19Mail-In Evaluation when it's unclear what broke, credited in full
1 yearworkmanship guarantee, including a solder joint that reopens

The short version

  • A crack, a clean break or an emergency-room cut in a gold, silver or platinum band is usually repairable. Shank Repair starts at $45.
  • A band worn paper-thin needs new metal, a half or full new shank; a joint in metal that thin only moves the weak spot.
  • A break at the top of the ring, such as a snapped prong, is setting work rather than band work.
  • Tungsten carbide is the exception: GIA notes it's brittle and can't be resized, and a cracked tungsten band generally can't be repaired and is replaced.
  • Not sure what broke? The $19 Mail-In Evaluation is credited in full toward the repair.

Prices

Service PriceWhat's included
Shank Repair from $45A crack or cut (including an ER cut) cleaned, closed true, soldered or laser-welded with metal matched to the ring, and refinished. $45 silver, $57 14K yellow, $64 14K white or rose, $439 platinum. Worn-thin bands: a new half band from $120 in silver ($45 + $75). Bands 4mm and wider +$40.
Ring Reshaping from $53A bent or oval band worked back to round on a steel mandrel, checked under magnification for hairline cracks, stones tested for tightness. $62 in 14K yellow gold ($53 + $6 + $3).
Prong Rebuild from $29When the break is at the top: a snapped or missing prong rebuilt from its base, 1 to 4 prongs. $53 in 14K yellow gold ($29 + $19 + $5).
Mail-In Evaluation $19For damage you can't place, stones near the break, or an unknown or plated metal: examined under magnification, photographed and quoted item by item. Credited in full toward the repair.

Where did it break? Match the damage to the repair

Where a ring failed decides the fix, the price and whether stones need protecting.

  • A hairline crack at the bottom of the band. The most common break. The bottom of the shank takes the most wear, and it's where earlier sizing joints sit, because jewelers cut a ring opposite the stone. Fix: Shank Repair.
  • Snapped clean through, or cut off at the hospital. The ends are cleaned, brought together without a gap, joined and refinished. Fix: Shank Repair, which includes ER cuts.
  • Thin, sharp-edged or flexing at the bottom. As a ring ages the shank wears thin, and the standard repair replaces that section: the worn metal is cut out and new stock matched to the band's karat, color, width and thickness is soldered in at both ends. That's a half shank; a full shank replaces the band up to the head.
  • Bent oval, with or without a crack. Ring Reshaping works the band back to round in small steps and checks it under magnification for hairline cracks. If one turns up, you get photos and a price before anything more is done.
  • Broken at the head. A snapped or missing prong is a Prong Rebuild (see the prong repair cost guide); a stone that has shifted or come out is Reset Loose Stone, $89.
  • A soldered wedding set that came apart. The rings are aligned and joined again under Solder Rings Together, from $62 for two rings.

Why rings crack in the first place

Gold, silver and platinum are ductile, so a healthy band bends before it breaks. A crack means something weakened the metal:

  • Wear. Years of gripping and rubbing against a neighboring ring thin the bottom of the band until it flexes and cracks.
  • Bending and straightening. Deforming metal work-hardens it: harder, but less ductile. A band squeezed out of round and pushed back by hand is likelier to crack next time.
  • Old joints. A sizing seam made with a poor fit leaves pits in the solder, a weak point years later.
  • Stretching. Stretching a ring to a bigger size stresses the metal, and a stretched band can snap.

Rose gold has its own reasons; see why rose gold rings crack.

How a jeweler repairs a cracked band

  • Photographed and examined. At JewelryRepair.com the ring is photographed on arrival, before any work, and the whole band is checked under magnification, not just the crack you noticed.
  • Stones protected. GIA notes that heat-sensitive stones such as emerald, tsavorite and tanzanite can be damaged by soldering near stones already in place, and that the bench jeweler decides which stones are at risk. Near stones, the break is laser-welded, which melts a pinpoint; one jeweler interviewed by Ganoksin describes working within half a millimeter of heat-sensitive stones with a laser.
  • Joined. Elsewhere it's soldered by torch with solder matched to the ring's karat and color.
  • Trued and finished. The band is rounded on a steel mandrel and refinished; on white gold, the repaired area gets fresh rhodium.
  • Checked. A second jeweler checks the work, the ring is photographed again before it ships, and a solder joint that reopens is covered by the 1-year workmanship guarantee.

The bench is Sky Jewelry's New York studio, family jewelers on Lenox Avenue since 1989 with over 50,000 repairs since 1989; JewelryRepair.com is how that bench takes repairs by mail.

What it costs at JewelryRepair.com

Shank Repair is $45 for a cracked or cut band in sterling silver. Gold adds a metal and a karat charge: 14K yellow is $57 ($45 + $7 + $5), 14K white or rose $64 ($45 + $14 + $5), and 18K yellow $62 ($45 + $7 + $10). Platinum is $439 ($45 + $394). Bands 4mm and wider add $40, and class rings $20.

Replacing worn metal costs more because new metal goes in. In silver, half a band is $120 ($45 + $75) and a full band $170 ($45 + $125). In 14K yellow gold, half a band is $307 ($57 + $250) and a full band $432 ($57 + $375). In platinum, $689 ($439 + $250) and $814 ($439 + $375).

Rush is $50 and ships the ring back 2 to 3 days sooner; shipping is $30 round trip per order.

When it can't be fixed the usual way

  • Tungsten carbide. GIA notes it is brittle and can crack or shatter under a hard impact, and that tungsten rings can't be resized. A cracked tungsten band generally can't be repaired and is replaced. See can a cracked tungsten ring be repaired.
  • Titanium, plated and fashion rings. Solder work on these is quoted rather than priced from the menu, because the method depends on the piece. Ask for a free quote through the contact page.
  • Antique and heirloom bands. Old metal can be brittle and earlier repairs hidden. If a repair looks unsafe for the piece, you're told before any work; Antique & Heirloom Restoration starts with the $19 evaluation.
  • A ring crushed beyond reshaping may be better remade: Custom Work & Modifications starts with a $10 estimate, and existing stones or gold can be reused or credited.

Can I fix it myself? And before you ship

Not properly. A band needs hard solder matched to its karat and color, or a laser weld; glue makes no metal bond, and electronics solder leaves a weak joint that must be removed before a real repair (see soldering jewelry at home). What does help:

  • Stop wearing it. Every grip flexes a cracked band, and a crack can open into a break.
  • Don't squeeze it closed. Forcing work-hardened metal back can start a second crack.
  • Keep every piece. Seal broken sections and any loose stones in a small bag inside the package.
  • Cover the full value if it's worth more than $100. Coverage of $100 is included each way; a $2,500 ring costs $60 to cover in full, both directions (2.5% of the $2,400 above $100), from the first UPS scan until it's signed for.
  • Pack it plain in a sturdy small box with nothing outside naming the contents, and drop it at any UPS location with the prepaid label from your account.

Questions

How much does it cost to fix a broken ring band?
At JewelryRepair.com, repairing a cracked or cut band is $45 in sterling silver, $57 in 14K yellow gold, $64 in 14K white or rose gold and $439 in platinum, with a 1-year workmanship guarantee. A band worn too thin to solder needs new metal, from $120 for half a silver band. Shipping is $30 round trip per order.
Can a cracked engagement ring be fixed without removing the diamond?
Often, yes. Most cracks sit at the bottom of the band, away from the setting, and laser welding melts only a pinpoint, so jewelers can work close to stones without heating them. Some colored stones, such as emerald, tsavorite and tanzanite, can be damaged by soldering nearby; the bench jeweler laser-welds near them or tells you before any change to the job.
Can a ring that cracked once crack again?
It can, if the cause is still there. Solder closes the crack but doesn't add metal to a band worn thin around it, and a ring that keeps getting bent work-hardens and can crack beside the repair. That's why the whole band is checked under magnification and a thin band gets a half shank instead. A solder joint that reopens is covered by the 1-year workmanship guarantee.
Can a ring that was cut off at the hospital be fixed?
Yes. An emergency-room cut is repaired like a crack: the band is closed true, joined with matching metal and refinished, under Shank Repair from $45 in silver or $57 in 14K yellow gold. If your size has changed since, Ring Resizing is a separate service from $45, so say so when you order rather than having it closed at the old size.
Is it worth fixing an inexpensive silver ring?
Often, yes, if the ring matters to you. A cracked silver band is $45 to repair, and the $30 round-trip shipping is the same however many pieces share the box. Plated or fashion rings that need solder work are quoted first, and sometimes the honest answer is that replacing the ring costs less. The $19 Mail-In Evaluation gets you photos and a price before you decide.