Jewelry repair questions · Rings & sizing
How does ring resizing work?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Smaller: a short section is cut from the bottom of the band (the shank) and the joint is soldered closed.
- Bigger: the band is cut, opened on a steel mandrel, and new metal matched to its karat and color is soldered in.
- Limits: big jumps, eternity bands, tungsten and rings with heat-sensitive stones need a different plan.
Prices
| Service | Price | What's included |
|---|---|---|
| Ring Resizing | from $45 | Sized down ($45 in silver) or up ($50 for one size, +$35 for each extra size) with sizing stock matched to the ring's karat and color, soldered, trued round, polished and stone-checked. Gold, platinum, wide bands and special styles add to the price. |
| Ring Sizing Beads | from $40 | Two small beads soldered inside the band so a ring that clears the knuckle stops spinning. The band isn't cut, and the beads can be removed later. A sizing bar is +$200. |
| Ring Reshaping | from $53 | A bent or oval band brought back to round on a mandrel and checked for cracks; sizing after the reshape adds $40. |
| Shank Repair | from $45 | For a band too thin or too often sized to resize safely: a crack closed, or half or all of the band replaced with new metal (silver +$75 / +$125; other metals +$250 / +$375). |
| Mail-In Evaluation | $19 | For eternity bands, heat-sensitive stones or metals not listed on the resizing page: examined under magnification, photographed and quoted. Credited in full toward the work. |
How a jeweler resizes a ring, step by step
At the JewelryRepair.com studio in New York, your ring stays with one named bench jeweler from start to finish.
- 1. Measure and inspect. The ring is photographed the day it arrives, its current size confirmed on a mandrel, and the metal, stones, prongs and band thickness checked. If it needs more than you ordered, work pauses until you approve.
- 2. Cut at the bottom of the shank, where the band is plain and farthest from the stones. If that would pass through an inscription, say so in your order notes; Ring Resizing also offers removal of an existing engraving (+$24).
- 3a. Smaller: a short section is sawn out, the ends meet flush and the joint is soldered.
- 3b. Bigger: sizing stock matching the band's width, thickness, karat and color is soldered in on both sides, so the joint doesn't show later as a different shade.
- 4. True and finish: the ring is rounded on the mandrel in small steps and re-measured, then the seam is filed and polished until it blends in.
- 5. Check. Cutting and heating can disturb the settings, so every stone is checked for movement. A second jeweler checks the size, seam and stones before the ring is photographed again and shipped back.
Sizing up vs sizing down, in millimeters
US ring sizes go up in steps of about 0.81 mm of inside diameter, which is about 2.55 mm of inside circumference per whole size (0.8128 mm × π).
- Sizing down is the simpler job: roughly 2.5 mm of band comes out per size, and it's included in the $45 base price here. What happens to that metal? See do you get the gold back when a ring is sized down?
- Sizing up uses new metal, which in gold and platinum has real value and has to match the band: it adds $5 for the first size and $35 for each full size after that.
- Stretching is a different method. A plain band can sometimes be stretched on a machine instead of cut, but Jewelers Mutual puts the limit at about half a size, and the band thins as it grows. It isn't a service listed here. More in can a ring be stretched bigger?
- Big changes strain the ring. Most rings can go about 2 to 3 sizes either way. Past about two, Jewelers Mutual cautions that the band may distort or the setting weaken, so a bigger change often calls for a new shank.
Heat, stones and finishes: what the jeweler watches for
Soldering heats the band, and heat travels. A 1987 Gems & Gemology article on gemstone durability (GIA) says sizing can sometimes be done with stones still set, but only when the jeweler knows how each stone reacts to heat, and that no repair should be tried with a stone in place until the gem is identified. Diamonds resist heat better than most gems, but even they can cloud or crack under a torch, and green or irradiated diamonds can change color. Emerald, tsavorite and tanzanite are among the stones it flags as heat-sensitive.
- Colored stones, pearls and opals: name them in your order notes; if a stone has to come out, you approve it first. See can a ring with an emerald or opal be resized?
- Pavé and channel-set bands: GIA notes these can't be resized easily, because the stones run down the part of the band that's cut and bent; start with the $19 Mail-In Evaluation. See can a ring with diamonds on the band be resized?
Rings that need a different approach
- Full eternity bands: with stones all the way around there's no plain metal to cut; sometimes a stone and its section of setting can be added or removed, and sometimes a new band is the only answer. Ring Resizing has an Eternity option (+$250), but the Mail-In Evaluation ($19, credited in full) is the honest first step. More on the eternity band.
- Tungsten, titanium and cobalt: Jewelers Mutual says tungsten is often difficult or impossible to resize, and none of these metals is on the Ring Resizing page (stainless steel is, at +$58). A free quote or the Mail-In Evaluation tells you what's possible for yours. See which ring metals can't be resized and can a tungsten ring be resized?
- A ring that spins but only just clears the knuckle: sizing it down would trap it behind the joint. Ring Sizing Beads (from $40) add two small, removable beads inside the band so it stops spinning; a sizing bar (+$200) is the other option, see what is a ring sizing bar?
- A bent or oval ring is rounded first with Ring Reshaping (from $53); sizing after the reshape adds $40, so a silver ring reshaped and sized is $93 ($53 + $40).
- A band sized many times, or worn thin: Shank Repair replaces half or all of the band with new metal when sizing alone would leave it weak. See how many times a ring can be resized.
- Under a maker's warranty or service plan: check with the maker first, because outside work can void it. More in does resizing a ring void the warranty?
What it costs at JewelryRepair.com
At JewelryRepair.com, Ring Resizing is $45 to size a sterling silver ring down and $50 to size it up one size ($45 + $5), plus $35 for each extra size up. Gold, platinum, bands 4 mm and wider, and special styles add to the price, and the page shows the exact total and a "Back in your hands by" date before checkout; the per-metal table is in how much ring resizing costs. Not sure of the size? See how to find your ring size at home and every fix for a ring that's too small or too big.
Every price includes a clean and polish and the 1-year workmanship guarantee, which covers a resize that shifts or a joint that reopens. JewelryRepair.com is the mail-in service of Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.
Questions
Does resizing a ring damage it or loosen the stones?
How many sizes can a ring be resized?
What is laser ring resizing?
Is it cheaper to make a ring smaller or bigger?
Should I size up if I'm between sizes or the band is wide?
Does a white gold ring need re-plating after resizing?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list