Jewelry repair questions · Chains, clasps & bracelets

Can a sterling silver chain be gold plated?

Yes. A sterling silver chain can be gold plated in yellow, rose or white gold, every link at once. Listings that say "gold polish" describe this plating, since polishing can't add gold, and the gold's thickness decides how long it lasts. At JewelryRepair.com a silver necklace chain is $110 with a flash coat ($60 + $50); thicker layers add $250 to $475.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$110silver necklace chain plated in yellow gold, flash coat ($60 + $50)
$95silver bracelet or anklet chain, flash coat ($60 + $35)
$360silver necklace chain at 1–2 microns ($110 + $250)
2.5 micronsthe FTC's minimum gold thickness for vermeil

The short version

  • Yes, and silver is the lowest-priced base metal to plate here. On the Gold Plating page silver adds nothing, while other base metals add $112 to $180.
  • "Gold polish" isn't a defined trade term. Polishing can't add gold, so a listing that uses it almost certainly describes plating. Ask the seller how thick the gold is.
  • Thickness decides how long it lasts, and a chain is hard on plating: every link rubs against its neighbors each time the chain moves.
  • Fix first, plate last. A broken link, a weak clasp or a length change should be done in bare silver, before the gold goes on.
  • It's still silver. Plating changes the color, not the metal. The chain stays sterling underneath and will need re-plating as the gold wears.

Prices

Service PriceWhat's included
Gold Plating: necklace chain from $110 necklace chainSilver chain polished, ultrasonic- and steam-cleaned, activated and plated in yellow gold. Flash $110; 1–2 microns $360; 2–3 microns $435; 3–4 microns $510; 4+ microns $585. Rose +$52, white +$65.
Gold Plating: bracelet or anklet chain from $95 bracelet or anklet chainThe same process for a shorter chain. Flash $95; 1–2 microns $345; 2–3 microns $420; 3–4 microns $495; 4+ microns $570.
Chain Soldering from $30A broken link closed while the chain is still bare silver, before plating. $30 for one break; rope +$25, Cuban +$38, hollow links +$20.
Clasp Replacement from $48A worn clasp replaced and soldered on before the gold goes on. From $48 for a small sterling spring ring.
Metal Testing & Verification $15If you're not sure the chain is sterling silver: hallmarks checked and the metal tested and documented.

Gold polish, gold plated, vermeil: what the words mean

Chain listings use these words loosely, and only some are defined. The US Federal Trade Commission's Jewelry Guides set these floors:

  • Gold plate or gold electroplate: gold of at least 10 karat, at least 0.175 microns thick in fine gold, about 7 millionths of an inch.
  • Heavy gold electroplate: at least 2.5 microns, about 100 millionths of an inch.
  • Vermeil: sterling silver plated on all significant surfaces with gold of at least 10 karat, at least 2.5 microns thick. If nickel or another base metal sits between the silver and the gold, calling it vermeil is deceptive unless that layer is disclosed.
  • Gold flashed or gold washed: the FTC sets no thickness. Wikipedia's summary of trade usage puts it under 0.5 micron.
  • Gold polish: not a defined term at all. Polishing can't add gold, so it almost certainly describes plating; ask how thick the gold is.

A micron is a thousandth of a millimeter. Even 2.5 microns is a thin skin, which is why the way a chain is worn matters as much as the label. See vermeil and gold plating in the glossary.

How a silver chain is gold plated at the bench

Plating reproduces whatever lies beneath it, so most of the work at the JewelryRepair.com studio in New York happens before any gold appears:

  • Polish. Tarnish and scratches come off and the silver is brought to a clean, bright surface; a dull spot left under the gold would show through it.
  • Clean. Ultrasonic and steam cleaning remove polishing compound and residue from between the links.
  • Activate. An activation bath prepares the surface so the gold bonds metal to metal rather than sitting on residue.
  • Plate. The chain is plated in yellow, rose or white gold at the thickness you chose.
  • Check. A second jeweler checks the work, and the chain is photographed before it ships back.

A pendant is plated as its own item. Gold Plating for a pendant starts at $60, so a silver chain and pendant together come to $170 at flash thickness ($110 + $60).

Which thickness for a chain you'll wear

Chains wear plating in their own way. Each link pivots against the next whenever you move, the links by the clasp are handled every time the chain goes on, and the stretch at the back of the neck rubs against skin and collars. Jewelers Mutual names friction as the everyday cause of plating wearing through. A flash coat suits a chain worn now and then; a chain worn every day is where a layer of a micron or more earns its cost. Prices for a sterling silver necklace chain in yellow gold:

  • Flash: $110 ($60 + $50)
  • 1–2 microns: $360 ($110 + $250)
  • 2–3 microns: $435 ($110 + $325)
  • 3–4 microns: $510 ($110 + $400)
  • 4 microns or more: $585 ($110 + $475)

A bracelet or anklet chain is $15 less at every thickness, because its item charge is $35 instead of $50: from $95 with a flash coat to $570 at 4+ microns. A rose gold finish adds $52 and white gold $65, so a flash-coated silver necklace chain in rose gold is $162. Rush adds $50. For a fuller price breakdown, see how much gold plating costs.

Why gold-plated silver can darken, and how to slow it

Gold doesn't tarnish, but the silver under it does, and the two don't stay neatly separate. Wikipedia's article on gold plating notes that gold-plated silver can still tarnish as silver atoms diffuse into the gold layer, which can take months or years depending on how thick the gold is. Platers can add a barrier layer of nickel or rhodium to counter it; under the FTC guides, a nickel layer under vermeil has to be disclosed, which matters if nickel irritates your skin.

  • Take it off for showers, swimming, workouts and chores. Jewelers Mutual lists sweat, lotions and pool chlorine among the things that attack plating and the metal under it.
  • Put it on after lotion and perfume, not before.
  • Clean it gently: warm water, a little dish soap, a rinse and a soft dry. Silver dips and polishing cloths take gold off along with the tarnish. More in how to clean gold-plated jewelry.
  • Store it on its own in a soft pouch, so it doesn't tangle or rub against other pieces.

Fix the chain first, then plate it

Solder heat and polishing both cut through plating. The Chain Soldering page lists gold-plated chains from $47 ($30 + $17); the Start a Repair wizard sends plated pieces needing solder to a free quote, and a jeweler confirms the method before work. For a chain that isn't plated yet, the simple answer is order: do the structural work while it's bare silver, then plate it. Add the repairs to the same order as the plating and tell us the sequence through the on-site chat or the contact page:

Already plated and worn patchy? Re-plating a gold-plated silver chain is booked the same way, with silver as the base metal; see can gold-plated jewelry be re-plated. Want plain silver back instead? See can gold plating be removed from silver.

When plating isn't the best answer

  • A chain you'll wear hard every day. Plating will eventually need redoing. Gold-filled chain carries far more gold: under the FTC guides, at least 1/20 of the metal's weight in gold of 10 karat or more, bonded on mechanically. Solid gold never needs plating at all.
  • An inexpensive chain. $110 plus $30 shipping can be more than a new plated chain costs. Plate the one you love.
  • You're not sure it's silver. Choose "Other / not sure" for the base metal and it's tested at no charge, or book Metal Testing & Verification for $15. A stainless steel chain needs an underlayer and adds $151; see can stainless steel be gold plated.
  • A guarantee isn't a lifespan. The 1-year workmanship guarantee covers plating that wears prematurely, not normal wear.

Shipping is $30 round trip per order by UPS, with the prepaid label ready in your account within minutes, $100 of coverage each way and a signature on delivery both ways. Pack the chain in a plain, sturdy box and drop it at any UPS location. Full value can be covered up to $10,000 for 2.5% of the value above $100, both directions: a $500 chain costs $10. Your chain is photographed on arrival at our New York studio and again before it ships back. JewelryRepair.com is the mail-in repair service of Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.

Questions

How much does it cost to gold plate a silver chain?
At JewelryRepair.com, gold plating a sterling silver necklace chain is $110 with a flash coat of yellow gold ($60 + $50), and $95 for a bracelet or anklet chain. Thicker gold costs more: $360 at 1–2 microns and $585 at 4 microns or more for a necklace. Rose gold adds $52, white gold $65, and shipping is $30 round trip per order.
How long does gold plating last on a silver chain?
There's no fixed lifespan; thickness and wear decide it. A flash coat on a chain worn daily wears first at the clasp end and where links rub, while a micron or more on a chain worn occasionally can last years. Jewelers Mutual says plated jewelry given proper care generally lasts several years, and silver slowly diffusing into the gold can dull it over months or years.
Is gold-plated sterling silver the same as vermeil?
Only if it meets the FTC's definition: sterling silver plated with gold of at least 10 karat, at least 2.5 microns thick, on all significant surfaces. A flash-plated silver chain is gold plated, not vermeil. And if nickel or another base metal sits between the silver and the gold, the FTC says that layer has to be disclosed before it can be sold as vermeil.
Will gold plating stop my silver chain from tarnishing?
Not permanently. While the gold is intact it covers the silver, but silver atoms diffuse into gold over time, and Wikipedia notes gold-plated silver can still tarnish, sooner with a thin layer. Once the plating wears through at the clasp or the link contact points, the silver there tarnishes as usual. Thicker plating, careful storage and taking the chain off for water slow both.
Can a worn gold-plated silver chain be re-plated?
Yes. Re-plating is booked on Gold Plating with silver as the current base metal, so a worn silver necklace chain is $110 again with a flash coat, or $360 at 1–2 microns if you want the new layer to last longer. The chain is polished, cleaned and activated before the gold goes on. Have any broken link soldered first; the plated-jewelry soldering answer covers that.
Can a silver chain be plated in rose gold or white gold?
Yes. Gold Plating offers yellow, rose and white finishes. On a sterling silver necklace chain with a flash coat, yellow is $110, rose gold $162 ($110 + $52) and white gold $175 ($110 + $65). If what you want is a brighter white silver chain, Rhodium Plating is the other route, from $109 for a silver necklace ($69 + $40).