Jewelry repair questions · Metals, plating & finishing
Can stainless steel, titanium, brass or copper jewelry be gold or rhodium plated?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Stainless steel: yes. The chromium oxide that keeps steel from rusting also keeps gold from sticking, so platers lay down a thin strike layer first. Stainless steel is a listed base metal on our Gold Plating page.
- Titanium: possible in industry, difficult at a jewelry bench. It isn't on our base-metal list, so it starts with a quote.
- Brass and copper: both listed; copper, like steel, gets an underlayer first.
- Rhodium: not listed for steel or titanium, so it's quoted first.
- Factory gold-tone steel is often a PVD coating, not electroplated gold, and that changes the prep.
- Nickel allergy? Ask what goes under the gold before you book.
Prices
| Service | Price | What's included |
|---|---|---|
| Gold Plating | from $60 silver from $211 stainless steel | Polish, ultrasonic and steam clean, activation bath, an underlayer first on stainless steel and copper, then yellow, rose or white gold at the thickness you choose. Stainless steel ring or pendant $211 ($60 + $151); brass $173; copper $240. |
| Rhodium Plating | from $69 | A bright white finish for sterling silver, gold and gold-plated fashion pieces. Stainless steel and titanium aren't on its metal list, so ask for a free quote before booking. |
| Mail-In Evaluation | $19 | For titanium, tungsten, bronze, platinum, a worn PVD coating or a metal you can't name: a jeweler examines the piece and sends an itemized quote with photos. Credited in full toward approved work. |
| Metal Testing & Verification | $15 | Hallmarks checked and the metal tested, so you know whether a piece is steel, plated brass or something else before you pick a plating option. |
Why some metals refuse to take gold
Electroplating deposits gold out of a solution onto a metal piece carrying an electric current, and the gold only bonds to clean, bare metal. Wikipedia notes that even a trace of oil stops a coating from adhering, and describes the usual workaround for metals that bond poorly: a strike, a very thin first deposit that serves as the foundation for the layer you want.
Stainless steel. Steel is stainless because it carries at least 10.5% chromium, which forms a microscopically thin chromium oxide layer that repairs itself when scratched: great for a ring, bad for plating. As one plating engineer puts it on the finishing.com trade forum, you want to plate onto metals, not onto oxides. The standard industrial answer is a Wood's nickel strike, an acidic bath that dissolves the oxide while depositing a thin layer of nickel in the same step. Gold then goes onto the fresh nickel.
Titanium. Titanium oxidizes immediately in air. A 1965 U.S. patent on electroplating titanium says the oxide skin interferes with the adhesion of plated coatings, and it describes the skin re-forming under some plating conditions, which is why titanium needs specialized pretreatment. That's engineering work, not routine jewelry plating, so we quote titanium individually.
Brass and copper, the usual bases of gold-tone fashion jewelry, are both on our list; the listing notes that metals that resist plating, like stainless steel and copper, get an underlayer first.
Gold-colored steel and titanium: what's already on it
Much gold-tone steel and titanium jewelry isn't electroplated at all. It's coated by physical vapor deposition (PVD), a vacuum process. Wikipedia notes that PVD can produce a range of colors on stainless steel and that PVD coatings are sometimes harder and more corrosion-resistant than electroplated ones. One gold-colored PVD coating is titanium nitride, a hard ceramic used on costume jewelry, usually under 5 micrometers thick.
- Why it matters: when a PVD finish wears through at the edges, gold electroplate can't simply go on top of the patchy remains. Whether the old coating has to come off first is a bench decision, made after a jeweler sees the piece.
- Hardness: electroplated gold is softer than a ceramic PVD layer, so a re-plated steel ring shows wear sooner than the factory finish did unless you choose a thicker layer.
- Anodized titanium (blue, purple, green) gets its color from the oxide itself. Plating would hide that color, not refresh it.
We offer gold electroplating, not PVD. If your piece came with a PVD or IP finish, say so in the order notes.
Nickel under the gold
Because the standard strike for stainless steel is nickel, a gold-plated steel piece often has nickel directly under the gold, on top of steel that already contains it: 316L, a common jewelry and watch grade, is 10 to 12% nickel. Gold is a barrier only while it's intact. Denmark's environmental agency, summarizing the EU's nickel rules, notes that a nickel-free coating such as gold plate must be durable enough to keep nickel release under the legal limit, 0.5 micrograms per square centimeter per week for items worn against the skin, for at least two years of use.
In practice, a flash coat over nickel matters less on a pendant that hangs over clothing and is a poor bet for a ring if you react to nickel, because rings wear through first. If you're allergic, say so in the order notes, ask through the free quote what underlayer will be used, and choose a thicker layer. See metal allergies in jewelry.
What it costs at JewelryRepair.com
Prices from the live Gold Plating page, Nov 18, 2026, in yellow gold at flash thickness unless noted:
- Stainless steel: ring or pendant $211 ($60 + $151); earrings $236 ($60 + $25 + $151); bracelet or anklet $246 ($60 + $35 + $151); necklace $261 ($60 + $50 + $151).
- Thicker layers on a stainless ring: 1 to 2 microns $461 ($211 + $250); 2 to 3 microns $536 ($211 + $325). For comparison, the FTC's Jewelry Guides require at least 0.175 microns of 10 karat or better gold for a piece sold as gold electroplate, and 2.5 microns for heavy gold electroplate.
- Color: rose adds $52 and white adds $65, so a rose-gold stainless ring is $263 ($211 + $52).
- Brass or copper: a brass ring or pendant is $173 ($60 + $113); copper is $240 ($60 + $180).
- Titanium, tungsten, bronze or platinum: not on the base-metal list. Ask for a free quote through the on-site chat or the contact page, or book the $19 Mail-In Evaluation, credited in full.
- Not sure what it is? Metal Testing & Verification is $15 per item.
- A white finish instead: Rhodium Plating lists sterling silver, gold and gold-plated fashion metal, not stainless steel or titanium, so those are quoted first. See rhodium plating cost and how long it lasts.
Rush adds $50 on eligible orders. The 1-year workmanship guarantee covers plating that wears prematurely, though not ordinary wear beyond that standard.
Is it worth it, and the alternatives
Do the door-to-door math first: a stainless steel ring at flash thickness is $241 with round-trip shipping ($211 + $30). It makes sense for a piece you can't replace: an engraved tag, a gift, a ring with a story.
- If you just want it to look new: bare stainless steel polishes well. Jewelry Polishing in stainless steel is $50 for a ring or earrings ($30 + $20).
- If you wear it daily: budget for 1 to 2 microns or more, or consider solid gold or vermeil. See how long gold plating lasts.
- If you're tempted by a home kit: brush-plating kits face the same oxide problem on steel. See can you plate jewelry at home?
- If it also needs solder: heat at a joint cuts through plating, so plated and steel pieces that need soldering are quoted first. See soldering plated or stainless jewelry.
The $30 covers UPS both ways, with the prepaid label ready in your account, $100 of coverage each way and a plain box. Each piece is photographed when it reaches our New York studio and again before it ships back, and a second jeweler checks the bench jeweler's work. Behind JewelryRepair.com is Sky Jewelry, a family of jewelers on Lenox Avenue with over 50,000 repairs since 1989.
Questions
How long does gold plating last on stainless steel?
Can you rhodium plate stainless steel?
Can titanium jewelry be made gold colored?
Is gold-plated stainless steel safe for a nickel allergy?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list