Jewelry repair questions · Rings & sizing
Can a sterling silver ring be resized, and what does it cost?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Yes. Silver is soft and workable, though it spreads heat fast, so it needs care at the seam. The sizing stock is sterling matched to the band.
- How far: most rings go about 2 to 3 sizes either way. Jewelers Mutual cautions that more than two sizes may distort the band or weaken the setting.
- Check first: stones (turquoise, pearls and some colored stones dislike heat), a pattern that runs all the way round, an inscription inside, and plating, whether rhodium or gold vermeil.
- Only slightly loose? Sizing beads, from $40, stop a ring spinning without cutting the band.
Prices
| Service | Price | What's included |
|---|---|---|
| Ring Resizing | from $45 | Cut at the base of the band; a section removed, or sterling sizing stock added; soldered (laser for heat-sensitive settings, torch where the piece allows); trued round, polished and every stone checked. +$35 per extra full size up; bands 4mm and wider +$46. |
| Ring Sizing Beads | from $40 | Two small sterling beads soldered inside the band so a ring that spins still passes the knuckle; reversible. $85 with large 3mm beads, $240 with a sizing bar. |
| Ring Reshaping | from $53 | A bent or oval silver ring rounded on a mandrel, checked for cracks and polished. $93 with sizing after the reshape ($53 + $40). |
| Shank Repair | from $45 | A cracked, cut or worn-thin sterling band: $45 to close a crack, $120 to replace half the band ($45 + $75), $170 for the full band ($45 + $125). |
How a silver ring is resized, and what's different about silver
The method is the same as for gold: the band is cut at the bottom, a short section is taken out to go smaller, or a piece of new sterling, called sizing stock, is soldered in to go bigger. The ring is trued round on a steel mandrel, the seam is filed and polished until the joint disappears, and every stone is checked. The full sequence is in how does ring resizing work? Silver behaves differently from gold at the bench in three ways.
- Heat spreads fast. Silver has the highest thermal conductivity of any metal, so heat applied at the seam travels quickly round the whole band and into anything set in it. At JewelryRepair.com, seams on heat-sensitive settings are laser-welded, and the torch is used only where the piece allows.
- Fire stain. Sterling is 92.5% silver and 7.5% other metals, usually copper. Heated in air, that copper oxidizes and can leave fire stain, a subtle red-purple discoloration that is most common in sterling. Flux applied before heating reduces it; removing it afterwards means taking off metal.
- Softness. Silver is relatively soft, 2.5 on the Mohs scale in its pure form, and copper is added to sterling to make it harder and stronger. Soft silver also bends out of round more easily, so an oval ring is reshaped before it's sized.
Silver rings that need a different plan
- Turquoise, pearls and colored stones. GIA says high heat can discolor and damage turquoise. GIA research on gem durability adds that pearls can't withstand heat or polishing, and names emerald, tsavorite and tanzanite among heat-sensitive stones. List the stones in your order notes. If a stone has to come out first or the plan changes, a jeweler tells you on arrival and you approve it before work begins. See can turquoise jewelry be repaired?
- Patterns that run all the way round. Added stock is plain metal, so it interrupts a pattern, and removing a section has to fall where the pattern can close up. GIA notes twisted bands are more difficult to resize. Mention the design when you book.
- An inscription inside. The cut can go through it. Ring Resizing has a Remove an existing engraving option (+$24); see can an engraved ring be resized?
- Rhodium-plated sterling. Heat and polishing at the seam take the plating off there, and Rhodium Plating for a sterling ring is $69.
- Gold vermeil. Under US Federal Trade Commission rules, vermeil is sterling silver coated with gold of at least 10 karat, at least 2.5 microns thick. The seam won't carry that gold after sizing. The Ring Resizing page has a Gold-plated / fashion option (+$23, from $68 to size down); because the seam loses its plating, a jeweler confirms the plan on arrival, and you can get a free quote first through the on-site chat or the $19 evaluation. Re-plating is a separate service: Gold Plating, from $60 for a ring on silver. See can a gold-plated ring be resized?
- Stones all the way round. A full eternity band has no plain metal to cut. Ring Resizing has an Eternity style option (+$250, so $295 to size a silver eternity band down, $300 up one size), but every band is different, so the $19 Mail-In Evaluation, credited in full, is the honest first step.
- A thin, cracked or much-resized band. Each resize leaves a joint, and a worn band can be too thin to take another. Shank Repair replaces half a sterling band for $120 or the full band for $170.
Resize it, bead it, or replace it?
With the $30 round trip, sizing a sterling ring down comes to $75 and one size up to $80, and several pieces can share the box. For a handmade, inherited, engraved or stone-set ring, resizing keeps the piece you have. For an inexpensive mass-produced band, compare the total with the price of a new one in your size before you send it.
If the ring passes your knuckle but spins on the finger behind it, sizing it down could stop it passing the knuckle at all. Ring Sizing Beads solve that: two small beads soldered inside the band grip the finger, and they can be removed later. Jewelers Mutual suggests beads when a ring needs to be about a half size smaller. In sterling they're $40 with small 2mm beads, $85 with large 3mm beads ($40 + $45) and $240 with a sizing bar ($40 + $200). Spring inserts aren't currently offered. More in every fix for a ring that's too small or too big.
What it costs at JewelryRepair.com
The Ring Resizing page sets the exact price from the direction, metal, width, style and extras you choose. Sterling silver adds nothing to the base price. Typical totals from the live page, Nov 18, 2026, for a band under 4mm wide:
- Size down: $45.
- Size up: $50 for one size ($45 + $5), $85 for two ($50 + $35), $120 for three ($85 + $35).
- Wide band, 4mm and up: +$46, so $91 to size a wide sterling band down.
- Signet or class ring: +$35, so $80 to size a silver signet down.
- Gold-plated or vermeil: the Gold-plated / fashion option, +$23, confirmed on arrival (see above). Not sure what it is? Choose Other / not sure: the metal is tested at no charge and the exact price is set once it's confirmed.
Every price includes a clean and polish and the 1-year workmanship guarantee, which covers a resize that shifts or a joint that reopens. Shipping is $30 round trip by UPS: the prepaid label is in your account minutes after checkout, you drop the plain box at any UPS location, and $100 of coverage is included each way. Covering a $500 ring in full adds $10, which is 2.5% of the $400 above $100. The ring is photographed when it reaches the New York studio and again before it ships back, a bench jeweler does the work and a second jeweler checks it, and a signature is required at both ends. The work happens at Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989. For how price drivers compare across metals, see how much ring resizing costs.
Questions
How much does it cost to resize a sterling silver ring?
Can a silver ring be made bigger without adding metal?
Can a sterling silver ring with turquoise be resized?
Will you be able to see where my silver ring was resized?
How long does it take to resize a silver ring by mail?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list