Jewelry repair questions · Metals, plating & finishing
Can sterling silver jewelry be repaired?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Yes, almost always. Sterling is the same alloy all the way through, so it can be soldered, sized, re-tipped, polished and re-plated again and again.
- It's usually the cheapest metal to repair. On most JewelryRepair.com repair pages sterling silver is the base price, with no metal surcharge.
- Not sure what it is or what's wrong? Metal testing is free within a repair when you choose "not sure," and the $19 Mail-In Evaluation is credited in full.
Prices
| Service | Price | What's included |
|---|---|---|
| Chain Soldering | from $30 | One break in a sterling silver chain, torch-soldered, or laser-welded on a hollow chain (+$20) so the links don't collapse. Rope +$25, Cuban +$38; two breaks +$17. |
| Ring Resizing | from $45 | Sizing stock matched to the ring, soldered, polished and stone-checked. In silver: $45 down, $50 up one size, +$35 per extra full size up; bands 4mm and wider +$46. |
| Shank Repair | from $45 | A cracked or cut silver band closed and refinished; a band worn too thin to solder gets new metal: half band $120 ($45 + $75), full band $170 ($45 + $125). |
| Clasp Replacement | from $48 | A small silver spring ring or lobster clasp replaced, soldered on and action-tested, or your clasp repaired when it's salvageable. A small silver box clasp is $130. |
| Jump Ring Repair | from $19 | The ring that holds a pendant or clasp soldered shut, or replaced with a heavier one, so it can't pull open again. |
| Prong Re-Tipping | from $29 | New metal laser-welded onto worn prong tips, 1 to 4 prongs in silver; 5 to 9 prongs $74. |
| Jewelry Polishing | from $30 | Scratches and tarnish polished out to a mirror, satin or brushed finish: $30 for a silver ring or earrings, $105 for a necklace. |
| Mail-In Evaluation | $19 | For a piece with several problems, or one you can't diagnose: examined under magnification and quoted item by item with photos. |
What sterling is, and how it behaves at the bench
Sterling is an alloy of 92.5% silver, with the rest usually copper. The Federal Trade Commission's jewelry guides say nothing should be sold as sterling unless it is at least 925 parts per thousand silver, which is why the mark reads 925, Sterling or Ster. Because it's the same metal right through, a jeweler can cut it, add metal, solder the seam and polish the joint until it disappears, then do it again years later. Plated jewelry can't: its surface is a thin skin, and any repair that cuts or heats through it leaves a spot to re-plate. Silver still needs its own habits:
- It spreads heat. Silver's thermal conductivity is among the highest of any material, 429 W/(m·K) in Wikipedia's figures, so torch heat runs away from a joint into the rest of the piece and reaches nearby stones, pearls and enamel sooner. That's one reason a laser weld, which keeps the heat to a pinpoint, is used near anything delicate.
- Its copper can firestain. Heating sterling in air oxidizes the copper below the surface and can leave firestain, a blotchy red-purple bloom that often appears only after polishing. Ganoksin's bench article explains that boric acid coatings limit it and that removing it means polishing below it or plating over it.
- Finishes react to heat. Rhodium or gold plating and oxidized (blackened) finishes can change color when a repair heats them; Ganoksin notes rhodium can burn black when reheated. Expect a plated area near a repair to need re-plating.
- It wears where it works. Bands thin at the bottom, clasp springs tire and jump rings stretch open. A band worn paper-thin needs new metal, not another solder joint.
What it costs at JewelryRepair.com
Sterling silver is the no-surcharge choice on most repair pages, so these are starting prices from the live pages on Nov 18, 2026, each with a clean and polish and the 1-year workmanship guarantee:
- Broken chain: Chain Soldering, $30 for one break; a rope chain $55 ($30 + $25), a hollow chain $50 ($30 + $20), two breaks $47 ($30 + $17).
- Pendant fell off: Jump Ring Repair, $19; a split or worn-thin bail is Bail Repair, $39.
- Clasp won't hold: Clasp Replacement, $48 for a small spring ring or lobster; a small box clasp is $130 ($48 + $82).
- Ring the wrong size: Ring Resizing, $45 down, $50 up one size, plus $35 per extra full size, so two sizes up is $85.
- Cracked or worn-thin band: Shank Repair, $45 for a crack; a new half band $120, a full band $170.
- Worn prongs: Prong Re-Tipping, $29 for 1 to 4 prongs.
- Broken earring post: Earring Post Repair, $30 a pair or $20 for one, never glued.
- Dull or tarnished: Jewelry Polishing, $30 for a ring or earrings, $105 for a necklace; Rhodium Plating, $69 on a silver ring.
Sterling, silver-plated or something else? How to tell
- Look for the mark: 925, Sterling or Ster., usually inside a ring or on a small tag near a clasp. Stamps can be wrong, and a missing one is a reason to test.
- Watch the names. Nickel silver and German silver contain no silver at all; they are copper, nickel and zinc. EPNS means electroplated nickel silver, a plated base metal.
- Check worn edges. On a plated piece, a different-colored metal often shows through at edges and high points.
- Tarnish proves nothing. Silver plate tarnishes too, because its surface is silver.
- Let the bench test it. Choose "Other / not sure" for the metal on a repair page and the metal is tested at no charge within the repair. On its own, Metal Testing & Verification is $15 per item.
When silver can't be repaired, and the alternatives
- Silver-plated or costume pieces. Solder and polishing cut through the plating. In the Start a Repair wizard, plated pieces needing solder work or polishing go to a free quote; see whether costume jewelry can be repaired.
- A chain worn thin along its whole length. Soldering one break only moves the failure to the next weak link. Our chain soldering cost guide covers when a chain isn't worth repairing.
- A band too thin to hold solder. The fix is a new half or full band, not another joint.
- Antique silver with patina. Abrasive polishing removes metal and patina, so heirlooms go through Antique & Heirloom Restoration, starting with the $19 evaluation, with the patina preserved; see whether antique jewelry can be restored.
Can I fix silver jewelry myself?
Some of it. Light tarnish is a home job: the Canadian Conservation Institute says a silver polishing cloth is most useful for lightly tarnished silver, and warns that chemical dips should never be used on pieces with sealed hollow parts. Structural repairs are a different matter. A jump ring squeezed shut with pliers leaves a joint that the same pull can reopen, glue gives way, and soft solder from an electronics kit is the wrong material: if it contains lead, the lead eats into precious metal once a torch is applied later, so it has to be removed before a proper repair. See how to clean tarnished sterling silver and whether you can solder jewelry at home.
Before you ship
- Don't dip or scrub it first, especially antique or oxidized pieces; the bench cleans it as part of the repair.
- Note any finish you want kept, such as blackened recesses, a satin texture or rhodium plating, and any marks or inscriptions.
- Bag loose stones or broken parts in a small sealed bag inside the box.
- Send several pieces together. Shipping is $30 round trip per order, with the prepaid UPS label in your account, so one box spreads the fee.
$100 of UPS coverage each way is often enough for everyday silver; covering a $500 piece for full value adds $10 (2.5% of the $400 above $100), and the shipping and insurance page has the details. Each piece is photographed when it arrives at the New York studio of Sky Jewelry, family jewelers with over 50,000 repairs since 1989, and again before it ships back; a bench jeweler does the work and a second jeweler checks it.
Questions
How much does it cost to fix a broken silver chain?
Will a repair show on sterling silver?
Can silver-plated jewelry be repaired like sterling?
Is it worth repairing inexpensive silver jewelry?
Can tarnished or blackened silver be restored?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list