Jewelry repair questions · Metals, plating & finishing

Can you wear platinum and gold rings together, or will they wear each other down?

Yes, you can. Any two rings that rub will scuff each other, whatever they're made of. Where they rub, gold slowly loses a little metal, while scratched platinum mostly pushes metal aside into a satin patina. Polishing, re-plating a white gold band or soldering the pair fixes the wear; polishing a 14K gold ring is $55 at JewelryRepair.com.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$55Jewelry Polishing for a 14K yellow gold ring ($30 + $17 + $8)
$79Rhodium Plating for a 14K white gold ring ($69 + $8 + $2)
$15Metal Testing & Verification, if you're not sure which ring is which
50,000+repairs since 1989 by Sky Jewelry's family of jewelers

The short version

  • Yes, wear them together. The real questions are wear and color, not whether the metals are allowed to touch.
  • Both rings get marked. Gold loses a little metal where it rubs; platinum mostly displaces metal into a soft satin patina.
  • Hardness doesn't settle it. Platinum alloys alone vary widely, and in an industry lab test, higher hardness didn't mean less metal lost.
  • Diamonds outrank both. Stones that sit at the edge of a band can scratch the ring beside it, and rubbing wears prongs.
  • White gold beside platinum drifts warmer as its rhodium plating wears; platinum stays gray-white.
  • Fixes: polishing, re-plating, soldering the pair, or rebuilding a band that has worn thin.

Prices

Service PriceWhat's included
Jewelry Polishing from $30Rub marks and scratches polished out, by machine and by hand, to a mirror, satin or brushed finish. Ring in 14K yellow gold $55; platinum $125 ($30 + $95).
Rhodium Plating from $69Polish, clean and fresh rhodium, so a white gold band matches a platinum ring again. 14K white gold ring $79.
Solder Rings Together from $62Two rings joined so they stop rubbing. The configurator takes one metal for the set, so for a platinum ring with a gold band, ask for a free quote or start with the $19 Mail-In Evaluation, credited in full.
Shank Repair from $45A band worn thin from years of rubbing rebuilt with new metal: half band $307 in 14K yellow gold ($45 + $7 + $5 + $250) for a band under 4mm wide; 4mm and wider adds $40.
Prong Re-Tipping from $29Prong tips worn by a neighboring band rebuilt: 1 to 4 prongs $57 in 14K white gold ($29 + $23 + $5), $224 in platinum ($29 + $195).
Metal Testing & Verification $15Hallmarks checked and the metal and karat tested and documented, per item.

Which ring wears which?

You'll often read that platinum is harder, so it will eat a gold band. The picture is messier than that.

  • Platinum isn't one hardness. In Jewellery Business, jewelry author Renée Newman gives pure platinum at 56 HV on the Vickers scale, 950 platinum-iridium at about 80 HV, 900 platinum-iridium at 110 HV and 950 platinum-ruthenium at about 130 HV, with work-hardening raising it further. Gold alloys vary with karat and recipe too, so the stamp alone doesn't tell you which ring is harder.
  • Hardness didn't predict loss. A 2021 study by the German precious-metals institute fem, commissioned by Platinum Guild International and reported by JCK, ran abrasion tests on 950 platinum-ruthenium and platinum-iridium alongside 14K and 18K nickel and palladium white golds. The gold alloys lost weight and the platinum didn't, and higher Vickers hardness didn't mean less loss for either metal. A World Gold Council consultant quoted in the same report said both white gold and platinum alloys perform exceptionally well as jewelry metals. Keep in mind who paid for the study.
  • Why the difference: Newman explains that when gold is scratched or polished, part of the metal is worn away, while platinum is pushed aside rather than lost. That's why worn platinum turns satin and keeps its weight, and why a gold band worn against it is usually the one that slowly thins.

Stones matter as much as metal. Any band set with diamonds near its edge acts on its neighbor: GIA notes that diamond can scratch any of the precious metals used for settings. Rings that spin against each other, as the Solder Rings Together listing puts it, grind away metal, engraving and eventually prongs. In a platinum-and-gold pair, plan for the gold ring to need attention first.

Color: what people notice first

  • Platinum with white gold. New, they look nearly identical. White gold is usually rhodium plated, and the plating wears where the band rubs; our rhodium plating guide puts that at about 12 to 24 months on rings worn every day. As it wears, the band shows a warmer, faintly yellow tone beside the platinum. Re-plating brings it back; nothing is wrong with the gold.
  • Platinum with yellow or rose gold. The contrast is the point, so there's nothing to match. Plenty of rings already combine the two in one piece; see why gold rings have platinum prongs.
  • Not sure which is which? Look inside the band for PT950, PLAT or 950Pt against 14K, 585, 18K or 750. If there's no stamp, Metal Testing & Verification settles it for $15.

How to keep a mixed stack from wearing down

  • Check the edges. If diamonds on a band sit right at its edge, they will mark the ring beside them. A jeweler can tell you whether a different order on the finger, or a plain band between them, would help.
  • Stop the spinning. Most rubbing comes from two rings turning independently. Soldering them together ends it; see should I solder my wedding rings together? For a platinum ring with a gold band, the join is quoted rather than booked, because the Solder Rings Together configurator takes one metal for the set and the two metals melt far apart: platinum at about 1,768°C, gold at about 1,064°C. If you'd rather not solder, see ways to keep rings together without soldering.
  • Inspect once a year. For an engagement ring worn with a band, The Anniversary Service ($199) covers a deep clean, magnified inspection, loose-stone tightening and re-rhodium on white gold.
  • Polish sparingly. Polishing gold removes a little metal each time, so a band that's polished every few months will thin faster than one polished when it really needs it.

Repairing the wear, and what it costs

Prices from the live repair pages at JewelryRepair.com, the mail-in service of Sky Jewelry in New York. Each includes a clean and polish and the 1-year workmanship guarantee.

  • Jewelry Polishing, per ring: $30 in sterling silver, $55 in 14K yellow gold ($30 + $17 + $8), $60 in 14K white gold ($30 + $22 + $8) and $125 in platinum ($30 + $95).
  • Rhodium Plating: $79 for a 14K white gold ring ($69 + $8 + $2) and $83 in 18K ($69 + $8 + $6).
  • Prong Re-Tipping, 1 to 4 prongs: $53 in 14K yellow gold ($29 + $19 + $5), $57 in 14K white gold and $224 in platinum.
  • Shank Repair: a crack is $57 in 14K yellow gold ($45 + $7 + $5). A band worn thin is re-shanked with new metal: the bottom half is $307 ($45 + $7 + $5 + $250) and the full band $432 ($45 + $7 + $5 + $375) in 14K yellow gold, for a band under 4mm wide; 4mm and wider adds $40.
  • Solder Rings Together: two 14K yellow gold rings $72 ($62 + $6 + $4), two platinum rings $136 ($62 + $74). A platinum and gold pair starts with a free quote through the contact page or the $19 Mail-In Evaluation, credited in full.

Send both rings in one box, so the pair travels on one $30 UPS round trip and the jeweler can see exactly where they rub. A $5,000 pair can be insured for its full value for $122.50 (2.5% of $4,900), covering both directions; see how shipping insurance works. Both rings are photographed on arrival and before they ship back, and a second jeweler checks the bench work. Sky Jewelry, family jewelers on Lenox Avenue since 1989, runs JewelryRepair.com: over 50,000 repairs since 1989.

Questions

Does platinum scratch gold?
Yes, and gold scratches platinum; any two rings that rub mark each other. The difference is what happens to the metal. Gold loses a little where it's scratched, while platinum is mostly pushed aside into a satin patina, so over the years the gold band is usually the one that thins. Polishing a 14K yellow gold ring is $55 at JewelryRepair.com.
Can you wear platinum and white gold rings together?
Yes. New, they look almost the same. The difference shows as the white gold's rhodium plating wears, usually within about 12 to 24 months on a ring worn daily, leaving the band slightly warmer in tone than the platinum. Re-plating a 14K white gold ring is $79 at JewelryRepair.com, and it brings the two back into line.
Can you wear a platinum engagement ring with a yellow gold band?
Yes; it's a classic pairing, and the contrast is intentional. Expect both to mark where they touch, with the gold band more likely to show wear first. Check that any diamonds on either ring don't sit at the edge rubbing the other. If the band thins over the years, Shank Repair can rebuild the bottom half in 14K yellow gold for $307 on a band under 4mm wide; 4mm and wider adds $40.
Can a platinum ring be soldered to a gold ring?
It can be done, but it's quoted rather than booked. Platinum melts at about 1,768°C and gold at about 1,064°C, so the join has to be planned around the gold. At JewelryRepair.com the Solder Rings Together configurator takes one metal for the set, so a mixed pair starts with a free quote or the $19 Mail-In Evaluation, credited in full toward the work.
Will 10K gold scratch 14K gold?
They'll scratch each other wherever they rub. Karat tells you how much gold is in the alloy, 41.7% for 10K and 58.3% for 14K, not how hard a particular ring is; the other metals and how the ring was made matter more. Watch the thinner or narrower band. Polishing a 14K yellow gold ring is $55 at JewelryRepair.com, and a 10K one $47.