Repair questions · Pearls
How do you clean beaded jewelry without damaging the string, and can it get wet?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Wipe, don't soak. A soft cloth dampened with lukewarm water and a drop of mild soap, bead by bead, then a second cloth with plain water.
- Dry it flat, on a towel, until the string is completely dry. GIA gives the same rule for strung pearls: the string must be completely dry before you wear them.
- The string is the weak point. Silk loses up to 20% of its strength when wet and stays stretched once pulled; elastic breaks down with repeated soaking, chlorine, salt water and lotion.
- Match the method to the bead. Glass and crystal take a damp wipe; pearls, turquoise and other porous stones, wood, and dyed or metallic-coated seed beads need a lighter touch or a dry cloth.
- Never an ultrasonic or steam cleaner, a jewelry dip, or heat to dry it; see whether ultrasonic cleaners are safe for jewelry.
- Thread that stays dirty can't be washed clean without soaking; that's the point to restring.
Prices
| Service | Price | What's included |
|---|---|---|
| Pearl Restringing | from $15 + $4/inch | Beads (no surcharge) or pearls (+$20) restrung in their original order on silk or synthetic cord, with a clean and inspection. Hand-knotting +$25, new clasp +$25. A 7-inch bead bracelet is $43 ($15 + 7 × $4). |
| Mail-In Evaluation | $19 | For a strand with missing beads, a stretch bracelet you want kept on elastic, or a vintage piece you're not sure will survive cleaning: examined under magnification, with an itemized quote and photos, credited in full. |
Why strung beads need a different clean
On a chain, the metal is the structure. On beaded jewelry, the string is: silk, nylon or synthetic thread, coated beading wire, or elastic cord, finished with knots or crimps at the clasp. Most home cleaning advice is written for metal and stones, and the soak-and-scrub methods that suit a gold ring are exactly what wears out a strand.
Silk shows why. It's one of the strongest natural fibers, but it loses up to 20% of its strength when wet, and its elasticity is poor: stretched even a little, it stays stretched. A wet silk strand that's worn, hung up or tugged while drying comes back longer, with gaps between the beads. That's why GIA says strung pearls shouldn't be worn until the string is completely dry. Elastic has its own problem. A maker of glass-bead stretch bracelets notes that repeated soaking, chlorine, salt water, and everyday lotion or sunscreen speed up the breakdown of elastic fibers, and that trapped moisture does more damage than a single wetting.
The beads themselves vary. Glass doesn't absorb water. Turquoise, by contrast, can be discolored by chemicals, cosmetics and even skin oils or perspiration, according to GIA, and some seed-bead finishes rub or fade off. The bead tells you how gentle to be; the string tells you how wet you can get it.
Step by step: cleaning a beaded necklace or bracelet
- Work over a towel, with the piece unclasped and laid flat, so nothing hangs and pulls on the string.
- Dust first with a soft, dry brush, such as a clean makeup brush, to lift loose grime from between the beads.
- Wipe each bead with a cloth barely dampened in lukewarm water and a drop of mild dish soap. Hold the strand on either side of the bead you're cleaning rather than dragging the cloth along it.
- Reach the gaps with a barely damp cotton swab: between beads, around knots and at the clasp, where skin oil collects.
- Wipe again with a second cloth dampened in plain water to take off any soap.
- Pat dry with a soft, lint-free cloth, then lay the piece flat on a dry towel. Don't hang a damp strand, and don't use a hair dryer: GIA warns that high heat can discolor turquoise and damage its surface.
- Wait until it's fully dry, knots and clasp included, before you wear it or put it away.
- Clean the clasp separately. A silver polishing cloth on a sterling clasp is fine; keep polish and dips off the beads and string.
Bead by bead: what's safe
- Glass and lampwork beads: the most forgiving. A damp, soapy wipe is fine, since glass doesn't absorb water; buff with a lint-free cloth for shine.
- Crystal beads: Crystal makers advise not soaking crystal, to clean them by hand with lukewarm water or polish them with a soft, lint-free cloth, and to keep perfume, lotion and hairspray off them because they dull the crystal.
- Seed beads: check the finish. Fire Mountain Gems' durability chart rates dyed and galvanized finishes as prone to fading and wear from friction, sweat and chemicals, and color-lined beads as vulnerable to cleansers and solvents, while matte and iridescent finishes rate as durable, and metallic finishes resist solvents though their plating can wear with friction. Its advice for seed-bead pieces is a soft, dry cloth, with no liquid cleaners.
- Pearls: GIA says to wipe them with a very soft cloth after each wearing, to use warm, soapy water only for an occasional thorough clean, and never to use an ultrasonic or steam cleaner. More in how to clean real pearls.
- Turquoise and other porous or treated stones: GIA says warm, soapy water is safe for turquoise but steam and ultrasonic cleaners never are, and that heat or solvents can damage treated surfaces. Treat lapis, coral and similar beads the same way: a damp wipe, no chemicals, no heat.
- Wood, natural-seed or nut, bone and clay beads, and leather cord: a dry or barely damp cloth only. Leather cord stretches, especially when wet, so keep it dry.
- Metal beads: sterling or gold-filled beads on wire can take a polishing cloth bead by bead. Skip dips: they flood the string.
Can beaded bracelets get wet?
A splash, yes; a shower, swim or soak, no. Glass beads shrug off water, but the string under them doesn't: wet silk is weaker and stretches, and elastic wears out faster with repeated soaking, chlorine and salt water. Metal parts suffer too. Jewelers Mutual notes that chlorine can damage and discolor metals, gold and platinum included, which matters for clasps and metal spacer beads.
- Take beaded pieces off to shower, swim, use a hot tub or wash dishes.
- Put them on last, after lotion, sunscreen and perfume have dried.
- Roll a stretch bracelet on rather than pulling it wide; constant stretching wears the cord.
- If it gets wet, rinse off chlorine or salt with fresh water, pat dry and lay it flat until completely dry. Never put a damp strand away in a pouch.
When cleaning isn't enough
Dirt that has worked into the thread itself can't be washed out without soaking the string, which is the one thing you're trying to avoid. At that point, and whenever the string shows wear, the fix is new thread:
- Thread that looks gray, dark or frayed, especially next to the clasp.
- Gaps opening between beads, or beads that slide when you push them.
- A strand that hangs lower than it used to. Jewelers Mutual calls stretched strands a danger, especially pearls, and suggests asking a jeweler about restringing when they hang lower than usual.
- Elastic that no longer pulls the beads snug, or knots and crimps at the ends that look loose.
See whether a beaded necklace or bracelet can be restrung for what restringing involves, and how pearl restringing works for the step-by-step at the bench.
What it costs at JewelryRepair.com
Pearl Restringing handles bead strands too, and beads carry no surcharge. It's priced by length, measured end to end including the clasp: $15 plus $4 per inch (prices from the live repair page, Nov 18, 2026).
- 18-inch bead necklace: $87 ($15 + 18 × $4); $112 hand-knotted (+$25); $137 knotted with a new clasp (+$25).
- 7-inch bead bracelet: $43 ($15 + 7 × $4); an 8-inch one is $47.
- Pearls rather than beads: add $20, so an 18-inch pearl strand is $107, or $132 knotted.
- Stretch bracelets, missing beads or a fragile vintage strand: restringing is on silk or synthetic cord, and matching lost beads isn't a listed service, so ask for a free quote through the contact page first, or start with the $19 Mail-In Evaluation, credited in full.
Every strand is restrung in its original order and comes back clean, with the 1-year workmanship guarantee. If a strand has broken, put every bead and the clasp in a small sealed bag inside the box. Shipping is $30 round trip per order by UPS with $100 of coverage each way; full value can be insured up to $10,000 for 2.5% of the value above $100, covering both directions, so a $600 strand costs $12.50 to cover (2.5% of $500). JewelryRepair.com is the mail-in repair service of Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989. Your piece is photographed on arrival at the New York studio and again before it ships back, a bench jeweler does the work and a second jeweler checks it. We're independent and not affiliated with any maker or supplier whose care advice is cited on this page.
Questions
Can beaded bracelets get wet?
How do you clean a beaded necklace strung on silk?
How do you clean glass or crystal bead jewelry?
How do you clean vintage or old beaded jewelry?
Can I put beaded jewelry in an ultrasonic cleaner?
How do I know if my beaded necklace needs restringing?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list