Jewelry repair questions · Cost & turnaround

Can broken gold jewelry be fixed, and is it worth repairing?

Usually, yes. Most breaks in solid gold, such as a snapped chain, a cracked band, worn prongs or a failed clasp, can be soldered or rebuilt at the bench. Whether it's worth it is simple arithmetic: the repair plus $30 round-trip shipping against the cost of replacing the piece. A 14K yellow gold chain break is $41 at JewelryRepair.com.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$4114K yellow gold chain, one break ($30 + $7 + $4)
$57cracked 14K yellow gold band under 4 mm wide ($45 + $7 + $5)
$30UPS round trip per order, however many pieces are in the box
50,000+repairs since 1989

The short version

  • Solid gold is very repairable. It takes solder well, and solder and new metal are matched to the piece's karat and color, so a well-made repair is hard to find afterward.
  • Usually worth it: a single chain break, a failed clasp or jump ring, worn prongs, a cracked band, a broken earring post or hinge.
  • Often not worth it: thin gold-plated fashion chains, hollow chains that keep breaking, and very fine chains with several breaks.
  • Almost always worth it: anything you couldn't replace, because the alternative is losing it.
  • Check that it's gold first. Stamps help; a $15 test settles it.
  • JewelryRepair.com repairs gold; it doesn't buy it.

Prices

Service PriceWhat's included
Chain Soldering from $30One break in sterling silver; gold adds a metal and karat charge: $41 for 14K yellow, $49 for 18K yellow. Torch solder, or laser weld for hollow chains, filed and polished flush. Rope +$25, Cuban +$38, hollow +$20; a second break +$17.
Clasp Replacement from $48A spring ring, lobster or box clasp replaced, soldered on and action-tested, or the original repaired. A small 14K yellow gold lobster clasp is $67 ($48 + $19); a medium one $95 ($48 + $28 + $19).
Shank Repair from $45A cracked or cut band soldered, including cuts made in an emergency room; worn-thin bands re-shanked with new metal. Cracked 14K yellow gold band under 4 mm wide: $57 ($97 at 4 mm and wider). Half the band replaced in 14K yellow: $307 under 4 mm, $347 at 4 mm and wider.
Mail-In Evaluation $19When you're not sure what's wrong or whether it's worth fixing: the whole piece examined under magnification, with photos and an itemized quote. Credited in full toward approved work.
Antique & Heirloom Restoration $19For old and inherited gold: the $19 evaluation, credited in full, then each step quoted item by item at regular menu prices, with photos, before any work.
Metal Testing & Verification $15Hallmarks checked and the metal and karat tested and documented. Included at no charge inside a repair when you choose "Not sure" for the metal.

What it costs to fix common gold breaks

Prices at JewelryRepair.com are a base price plus a metal charge and a karat charge. Here they are for 14K yellow gold, with the arithmetic (white and rose gold carry a higher metal charge, so a 14K white chain break is $48: $30 + $14 + $4); each includes a clean and polish and the 1-year workmanship guarantee.

  • Chain, one break: Chain Soldering, $41 ($30 + $7 yellow gold + $4 for 14K). In 18K, $49. A hollow 14K rope chain is $86 ($30 + $7 + $4 + $25 rope + $20 hollow).
  • Clasp gone: Clasp Replacement, $67 for a small 14K yellow lobster ($48 + $19) or $95 for a medium one ($48 + $28 + $19).
  • Open or missing jump ring: Jump Ring Repair, $31 ($19 + $7 + $5).
  • Cracked ring band: Shank Repair, $57 for a band under 4 mm wide ($45 + $7 + $5), or $97 at 4 mm and wider ($57 + $40).
  • Worn prongs: Prong Re-Tipping, $53 for one to four prongs ($29 + $19 + $5).
  • Broken earring posts: Earring Post Repair, $40 a pair with stick posts ($30 + $6 + $4), soldered or laser-welded, never glued; screwbacks, leverbacks and omega backs cost more.
  • Bracelet hinge: Hinge Repair, $67 ($45 + $5 for a bracelet + $11 + $6).
  • Bent ring: Ring Reshaping, $62 ($53 + $6 + $3).

Shipping is $30 round trip per order, the same however many pieces are in the box, so a broken chain, a cracked narrow band and a pair of stick-post earrings sent together come to $168 ($41 + $57 + $40 + $30). There's no minimum order.

Repair, replace or sell: doing the arithmetic

Three numbers decide it.

  • Repair: the repair price plus $30 shipping, shared across everything in the box. A 14K chain with one break is $71 all in ($41 + $30).
  • Replace: what a comparable new piece costs in the same karat, weight and style. A new piece's price covers the gold and the work of making it, so set it beside the repair total rather than beside the metal value.
  • Sell: a gold buyer pays for the metal, not the piece. Work out the pure gold first: karat is gold in 24ths, so 14K is 58.3% gold and 18K is 75%, per the World Gold Council. A 10-gram 14K chain holds 10 × 0.583 = 5.83 grams of pure gold, about 0.19 troy ounce (5.83 ÷ 31.1035), the unit precious metal markets use. Multiply by the day's gold price and you have the most the metal itself is worth; the design and workmanship aren't part of that number.

When the repair total is small next to replacing the piece, repair it. When a piece is plated, worn out along its whole length or simply one you don't want, replacing or selling may make more sense, and a jeweler should tell you so rather than sell you a repair that won't last. JewelryRepair.com repairs and restores gold but isn't a gold buyer. If you'd rather turn broken gold into something new, Custom Work & Modifications ($10 estimate) can reuse or credit your existing gold and stones.

When a repair won't last

  • Gold-plated fashion chains. Solder heat can burn off thin plating and leave a visible patch, as our chain soldering cost guide explains, so a $47 repair ($30 + $17 for plated) on an inexpensive chain rarely pays.
  • Hollow pieces that are crushed or keep breaking. Hollow chains can't take torch heat without collapsing, so they're laser-welded instead; if one keeps breaking in new places, a Mail-In Evaluation tells you whether another repair will hold. Hollow bangles can be reshaped, but can't always be made perfect.
  • Very fine chains with several breaks. At three or four joints the cost approaches a new chain: four breaks in a 14K yellow chain is $93 ($30 + $7 + $4 + $52).
  • Bands worn thin all the way round. A ring worn thin at the bottom needs new metal rather than a solder joint, a bigger job: replacing half the band in 14K yellow is $307 for a band under 4 mm wide ($57 + $250), or $347 at 4 mm and wider ($307 + $40).
  • Old repairs and antiques. Metal can grow brittle with age, and old solder joints hide under patina. These go through Antique & Heirloom Restoration, quoted step by step after a $19 evaluation.

If you can't tell which side of the line a piece is on, the Mail-In Evaluation ($19, credited in full toward approved work) gets a jeweler's look at the whole piece, with photos and an itemized quote. Approve all, some or none of it; a declined piece ships back with nothing more to pay.

Is it really gold?

Repair advice depends on what the piece is made of. Solid gold is usually stamped with its karat, often inside a band or on the clasp tag: 10K or 417, 14K or 583/585, 18K or 750, as GIA's metal guide lists them. GF means gold filled, and a karat followed by G.E.P. or R.G.P. means gold electroplate or rolled gold plate, a gold layer over another metal; under the FTC's Jewelry Guides, gold electroplate can be as thin as 0.175 microns. Stamps can be missing, worn or wrong. A gold buyer will test before paying, and a repair is priced by metal, so it's worth knowing: Metal Testing & Verification is $15 on its own, and free inside a repair order when you pick "Not sure" as the metal. See what 585, 750 and 925 stamps mean.

White gold gets one extra step: solder work on white gold includes rhodium re-plating of the repaired area, so the join matches the bright white around it.

Can I fix gold jewelry myself?

Some of it, carefully. An open jump ring is the one break that's reasonable to close at home: with two pairs of flat-nose pliers, the usual method is to twist the ends sideways back together rather than pulling them apart and squeezing. It's a stopgap, since an unsoldered ring can open again under a pendant's weight.

  • Glue isn't a repair. It lets go under wear, and it has to be cleaned off before the metal can be soldered, so a glued post or clasp is more work at the bench, not less. Earring posts here are soldered or laser-welded, never glued.
  • Leave hollow chains alone. They collapse under torch heat, which is why they're laser-welded at the bench.
  • Home solder kits aren't the same job: gold needs solder matched to its karat and color, and a controlled torch or a laser.
  • Stop if it's a ring or a prong. A crack in a band or a loose stone needs a jeweler before it's worn again.

Our answer on soldering jewelry at home covers the tools and the risks in more detail.

Before you ship

  • Bag each piece separately with everything that came off it: the broken link, the clasp, a post, a stone. Small parts are often what makes a repair match.
  • Leave a kinked chain as it is. Lay it loosely in the bag rather than working the kink out, so the jeweler sees it as it broke.
  • Note the karat stamp in your order notes if you can read one, or choose "Not sure" and the metal is tested free.
  • Pack it plain in any sturdy small box with the prepaid UPS label from your account. $100 of coverage is included each way, and $22.50 covers a $1,000 piece in full; how shipping insurance works explains it. US addresses only.

JewelryRepair.com is the mail-in repair service of Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989. Each piece is photographed on arrival and before it ships back, repaired by a bench jeweler at our New York studio and checked by a second jeweler.

Questions

How much does it cost to fix a broken gold chain?
At JewelryRepair.com, one break in a 14K yellow gold chain is $41 ($30 + $7 + $4), or $49 in 18K. Rope, Cuban and hollow chains cost more, and a second break adds $17. Shipping is $30 round trip per order, for any number of pieces in the box. Every price includes a clean and polish and the 1-year workmanship guarantee.
Is it worth fixing a gold-plated necklace?
Usually only if it matters to you. Solder heat can burn off thin plating and leave a visible patch, so a plated chain repair, $47 at JewelryRepair.com ($30 + $17) plus $30 shipping, often costs more than the chain did. If it's sentimental, worn plating can also be redone: re-plating a necklace with Gold Plating is $110 over sterling silver ($60 + $50) or $223 over brass ($60 + $50 + $113).
Will a repair show on my gold jewelry?
A good one shouldn't. Solder and new metal are matched to the piece's karat and color, the joint is filed and polished flush, and white gold solder jobs include rhodium re-plating of the repaired area. Hollow and very fine pieces are harder to make invisible, and plated pieces may show a patch where heat touched the plating. You can compare the intake and outgoing photos in your account.
Can broken gold be made into something new?
Yes. Through Custom Work & Modifications, which starts with a $10 estimate, existing gold and stones can be reused or credited toward a redesign, such as a ring-to-pendant conversion or combining pieces. A jeweler reviews the request and quotes the work before anything proceeds. JewelryRepair.com doesn't buy gold for cash, so this is the route for broken pieces you'd rather not repair as they were.
How long does gold jewelry repair take by mail?
About three weeks door to door for most repairs at JewelryRepair.com, including UPS transit both ways. Your exact promised-by date shows on the repair page before you pay. Rush service ($50) ships eligible repairs back 2 to 3 days sooner, and if a date can't be met, you're contacted with a revised date and can cancel work that hasn't begun.
Should I sell broken gold or repair it?
Repair it if you'd wear it again and the repair is small next to replacing it; sell it if you wouldn't. A buyer pays for the metal, pure gold weight times the day's price, so a 10-gram 14K chain counts as 5.83 grams of gold however well it was made. A $41 chain repair keeps the whole piece. JewelryRepair.com repairs gold but isn't a gold buyer.