Metals & plating

Palladium

Gold band beside a testing stone and acid bottle for metal testing

Palladium (Pd, element 46) is a platinum-family metal that is white all the way through, so it needs no rhodium plating to look white, and it is far lighter than platinum. Jewelers use it on its own, marked with its purity such as 950 (95% palladium), and as an alloying metal in some white gold.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

What palladium is

Palladium is one of the six platinum-group metals, with platinum, rhodium, ruthenium, iridium and osmium. It has been used in jewelry since 1939, including as an alternative to platinum in white gold alloys. Because palladium is naturally white, it doesn't need rhodium plating to look white, whereas white gold gets its bright finish from a rhodium layer that wears with time.

The numbers that matter for jewelry:

  • Weight: palladium's density is about 12.0 g/cm³, against 21.45 for platinum. Pure palladium is about 56% as dense (12.0 ÷ 21.45), so, going by the pure metals, a palladium band weighs a little over half as much as the same band in platinum; jewelry alloys shift that slightly.
  • Melting point: about 1,555 °C, against about 1,768 °C for platinum.
  • Tarnish: palladium doesn't tarnish in air at room temperature, but it can discolor when heated above 400 °C (752 °F), so jewelry palladium is heated under controlled conditions.

How palladium is marked

In the US, the FTC's jewelry guides accept "Pall." or "Pd." as abbreviations for palladium. A platinum piece alloyed with other platinum-group metals, with at least 500 parts per thousand platinum and 950 in total, may be marked Platinum if it shows the parts per thousand of each, for example 550Pt.350Pd.50Ir. The FTC's consumer guide gives 800 Pt. 200 Pall. as the mark for an item that is 80% platinum and 20% palladium. In the UK, assay offices began hallmarking palladium in January 2010, at 500, 950 or 999 parts per thousand.

A common source of confusion: palladium can also be one of the metals inside white gold. A white ring stamped 14K, 18K, 585 or 750 is white gold whatever is in its alloy, and it is booked and priced as white gold with its karat. A ring stamped 950 Pd or Pall. is palladium.

Why it matters for repairs

Every repair that adds or heats metal has to suit the metal it touches: sizing stock, solder and new prong tips are all matched to the piece. Palladium behaves differently from gold and platinum under heat and needs no rhodium, so booking it as white gold or platinum would mean the wrong materials and the wrong price.

The metal choices on the repair pages here cover gold, sterling silver, platinum and stainless steel, plus gold-plated and a few others on some services; palladium isn't among them. So a palladium piece starts with a Mail-In Evaluation: $19, credited in full toward the repair. A jeweler examines it under magnification and sends an itemized quote with photos, and nothing is worked on until you approve. If you decline, it ships back with the photos and findings, and the $30 round trip already covers the return. You can also ask for a free quote first through the on-site chat or the contact page; a jeweler replies within 1 business day.

That includes palladium men's wedding bands: light for their size and white all the way through, they don't need rhodium re-plating, and a resize, dent or deep scratch starts with the same $19 evaluation. Sky Jewelry, family jewelers on Lenox Avenue since 1989, has completed over 50,000 repairs since 1989, and every piece sent to JewelryRepair.com is photographed when it arrives and again before it ships back.

Palladium vs platinum

  • Both are platinum-group metals and both are naturally white, so neither needs rhodium plating.
  • Weight: pure platinum is about 1.8 times as dense as pure palladium (21.45 ÷ 12.0 = 1.79), so the same ring in platinum weighs nearly twice as much and feels noticeably heavier.
  • Marks: in the US, an item must be at least 950 parts per thousand platinum to be called platinum without qualification. Palladium is marked Pd. or Pall. with its own fineness.
  • Heat: palladium melts at a lower temperature and, unlike platinum, can discolor above 400 °C.
  • Repair pricing here: platinum is listed on most repair pages with its own charge, for example +$195 on Prong Re-Tipping and +$520 on Ring Resizing. Palladium is quoted after an evaluation.

How to tell if your jewelry is palladium

  • Look inside the band for Pd or Pall., often with 950 or 500.
  • A white ring that feels light for its size is less likely to be platinum.
  • White gold that has lost its rhodium often looks faintly yellow at the back of the band; palladium is white all the way through.
  • When the stamp is worn or missing, Metal Testing & Verification examines the hallmarks under magnification and tests the metal directly, $15 per item, with the result documented.

What it costs here

Service Price What's included
Mail-In Evaluation $19 How palladium repairs start here: the whole piece examined under magnification and an itemized quote with photos. The $19 is credited in full toward the repair; decline and it ships back with the findings.
Metal Testing & Verification $15 Hallmarks examined under magnification, then the metal tested directly with professional assay methods and the result documented, useful when a white piece's stamp is worn or missing.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

Is palladium the same as platinum?
No. Both are naturally white platinum-group metals, but palladium is a separate element, number 46, and much lighter: about 12.0 g/cm³ against platinum's 21.45, so, going by the pure metals' densities, the same ring in platinum weighs nearly twice as much. Palladium also melts at a lower temperature, about 1,555 °C against 1,768 °C, and is marked Pd. or Pall. rather than Pt.
Can a palladium ring be resized?
It depends on the ring, so here it's assessed one ring at a time rather than booked as a standard resize: palladium isn't on our Ring Resizing page. Sizing starts with a $19 Mail-In Evaluation, credited in full toward the repair. A jeweler examines the ring and sends an itemized quote with photos, and if you decline, the ring comes back with the findings and nothing more to pay.
Does palladium need rhodium plating?
No. Palladium is naturally white, so it doesn't need the rhodium layer that gives white gold its bright finish, and there is no plating to wear through and turn yellowish. That's also why Rhodium Plating isn't the fix for a scuffed palladium ring. Scratches and dents start with a $19 Mail-In Evaluation, credited in full toward the repair you approve.
Does palladium tarnish?
Not in normal wear: palladium doesn't tarnish in air at room temperature. It can discolor when heated above 400 °C (752 °F), which is why jewelry palladium is heated under controlled conditions when it is worked. If a palladium piece looks dull or discolored, a $19 Mail-In Evaluation gets an itemized quote with photos, credited in full toward the repair.
How do I know if my ring is palladium or white gold?
Check the stamp first: 950 Pd, Pd. or Pall. means palladium, while 14K, 18K, 585 or 750 means white gold, even if palladium is part of the alloy. A white gold ring often turns faintly yellow at the back of the band where its rhodium has worn. With no stamp, Metal Testing & Verification tests the metal directly and documents the result for $15 per item.
What does 950 mean on palladium jewelry?
950 means 950 parts per thousand palladium, or 95%, with the rest made up of other metals. UK assay offices have hallmarked palladium at 500, 950 or 999 parts per thousand since January 2010, and the FTC accepts Pd. or Pall. as the abbreviation in the US. If a piece has worn or unclear marks, Metal Testing & Verification examines them under magnification and tests the metal, $15 per item.

All glossary terms · Repair questions · How online jewelry repair works

Sources