Mail-in jewelry repair · Christopher Designs

Christopher Designs Crisscut ring repair, by mail

JewelryRepair.com repairs Christopher Designs Crisscut rings by mail and secures Crisscut stones but never cuts them; setting labor for one missing pavé diamond is $73 in 18k white gold, plus the stone. Shipping is $30 round trip. JewelryRepair.com is run by Sky Jewelry in New York, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.

$73set one missing pavé diamond, 18k white gold, plus the stone
$183set one missing pavé diamond, platinum, plus the stone
$19evaluation for a chipped center or split-shank sizing, credited in full
50,000+repairs since 1989

4.9 from 187 Google reviews (as of ) · Over 50,000 repairs since 1989

Prices

Service PriceWhat's included
Prong Re-Tipping from $29Worn tips on the prongs holding a Crisscut center, starting with the point prong on a pear, rebuilt with laser-welded new metal and shaped back over the stone: up to four is $224 in platinum, $65 in 18k white gold, $61 in 18k yellow gold. Ten to fifteen halo prongs add $70.
Stone Tightening from $50The halo and pavé diamonds around a Crisscut center, and any along a split shank, tested for movement under 10x magnification and the loose ones secured, up to eight stones per order: $85 in platinum, $60 in white gold.
Diamond Setting from $5A missing halo or pavé diamond replaced with a diamond we match and source, not a Crisscut, and set after you approve the stone and its price. Setting labor for one pavé diamond is $183 in platinum, $73 in 18k white gold.
Rhodium Plating from $6918k white gold polished to an even surface, deep-cleaned and re-plated with fresh rhodium: $83 for a ring. Platinum is white all the way through and doesn't need it.
Ring Resizing from $45Plain lower shanks on solitaire, halo and three-stone rings sized with stock matched to the karat and color, soldered, polished and stone-checked: $565 to size a platinum ring down, $92 for 18k white gold, plus $46 for 4mm and wider. Split shanks and anniversary bands are evaluated first.
The Anniversary Service $199Yearly engagement-ring care: deep clean, magnified inspection of every prong and stone, loose stones tightened, re-rhodium on white gold, and condition photos. Structural work beyond tightening is quoted separately.
Jewelry Appraisal from $105Written insurance-replacement-value appraisal with photographs: stones measured in their settings, metal tested, construction and condition documented. Not a lab grading report; send a copy of any you have.
Mail-In Evaluation $19For sizing split shanks or anniversary bands, invisible-set stones or a chipped center: a jeweler photographs the ring, examines it under magnification and sends an itemized quote. Credited in full toward the repair.

Common repairs for Christopher Designs pieces

A New York setter's diamond. Christopher Slowinski, a master diamond setter and designer originally from Poland, founded Christopher Designs in 1981 as a small contracting shop on Manhattan's 47th Street. He patented the Crisscut diamond in 1996, after a miscut baguette revealed triangular facets, and later the L'Amour Crisscut; the company says he has filed 17 patents for diamonds and jewelry. It makes its pieces in platinum or 18k gold in its New York City workshop, with stones set under microscopes. The company says its Crisscut process gives a stone far more facets than standard cuts.

The engagement rings come as solitaires, halos, pavé, side-stone, three-stone and split-shank styles, set with Original Crisscut rounds and emeralds or L'Amour Crisscut classic, oval and pear shapes, alongside wedding and anniversary bands. That mix decides most repairs:

  • Prongs on the center stone. Prong Re-Tipping laser-welds new metal onto each worn tip and shapes it back over the stone: $224 for up to four prongs in platinum ($29 + $195), $65 in 18k white gold ($29 + $23 + $13) and $61 in 18k yellow gold ($29 + $19 + $13). On a pear, the prong at the point guards the stone's most exposed tip, so it's the first one to check. A halo ring with ten to fifteen worn prongs is $294 in platinum ($224 + $70). A snapped prong is rebuilt from its base under Prong Rebuild at the same prices.
  • Halo and pavé diamonds. The small stones in a halo or pavé setting take the knocks first; our answer on why halo diamonds go missing covers the usual causes. Stone Tightening tests every stone for movement under 10x magnification and secures the loose ones, up to eight stones per order: $85 in platinum, $60 in white gold. A diamond that's gone is replaced under Diamond Setting: setting labor for one pavé diamond is $183 in platinum ($5 + $158 + $5 + $15) or $73 in 18k white gold ($5 + $33 + $15 + $5 + $15), plus the diamond, which you approve first; see our guide to stone replacement cost. The replacement is a diamond we match and source, not a Crisscut, so if the missing stone was itself a Crisscut, a jeweler tells you how close the match will look before anything is set.
  • 18k white gold. Rhodium Plating restores the bright white: $83 for an 18k white gold ring ($69 + $8 + $6). Platinum is white all the way through; scuffed platinum is refreshed under Jewelry Polishing, $125 for a ring ($30 + $95).
  • Upkeep once a year. The Anniversary Service, $199, deep-cleans the ring, inspects every prong and stone under magnification, tightens loose stones, re-rhodiums white gold and records condition photos; structural work beyond tightening is quoted separately.

Crisscut and L'Amour Crisscut stones at the bench

Christopher Designs says the Crisscut's crisscrossed faceting spreads light more evenly, and that the elongated L'Amour Crisscut, with its broader table, increases surface area by up to 60% compared with traditional emerald or oval cuts. Four practical points follow for anyone sending one in:

  • Your stone is yours to check. The crisscrossed facet pattern is distinctive, and your ring is photographed on arrival, before any work, and again before it ships back, so you can compare the center stone yourself in your account. Our guide on whether a jeweler will swap your diamond explains what to look for.
  • We set and secure Crisscut stones; we don't cut them. The Crisscut is a patented cut produced by Christopher Designs. We don't re-cut a center stone or supply a Crisscut replacement. A chipped or cracked center goes through the Mail-In Evaluation ($19, credited in full), so you see photos and the options for the setting; our answer on whether a chipped diamond can be fixed covers the choices.
  • Invisible-set pieces. Slowinski's first utility patent came from rethinking a poorly made invisible setting, with a new method to cut tracks and build a more secure setting. If you have an invisible-set Christopher Designs piece and a stone has shifted, stop wearing it and book the evaluation; our answer on whether an invisible-set ring can be repaired explains why these are looked at first.
  • Appraisals. A Jewelry Appraisal, from $105, measures the stones in their settings and documents the ring for insurance replacement value. It isn't a lab grading report and doesn't confirm a stone's cut name, so send copies of the brand paperwork and any grading report with the ring.

Sizing split shanks, three-stone rings and anniversary bands

Ring Resizing cuts the shank at the bottom of the ring, adds or removes metal with sizing stock matched to the karat and color, and solders it closed. For a Christopher Designs ring with a plain lower shank, it's $565 to size a platinum ring down ($45 + $520), $92 for 18k white gold ($45 + $24 + $23) and $81 for 18k yellow gold ($45 + $13 + $23). Sizing up adds $5, plus $35 for each full size beyond the first, and a band 4mm or wider adds $46. Most rings can move about 2 to 3 sizes either way.

  • Split shanks. Where the band divides into two arms, often with diamonds on each, the sizing work has to leave both arms even and the head centered. Those rings start with the Mail-In Evaluation, which returns photos and an itemized quote before any metal is cut.
  • Pavé down the sides and anniversary bands. Diamonds that run down the shank, or most of the way around an anniversary band, limit how far the band can move without disturbing stones. Those are evaluated first too; our answer on resizing a ring with diamonds on the band explains the limits.
  • Three-stone rings. A three-stone ring with a plain lower shank sizes at the listed price, and every resize is stone-checked afterward, all three heads included.

Christopher Designs coverage, and when to use us

Christopher Designs sells through the retail jewelers listed in its store locator. Its site has a Client Care area for booking an appointment and finding those retailers, and we found no published warranty terms there as of November 2026. Ask the store that sold the ring what coverage applies, and if the ring is covered, check with Christopher Designs first, because outside service can void it.

When we fit. The ring was inherited or bought secondhand, the store that sold it has closed, or the job is ordinary wear you want handled now: worn prongs, a loose halo stone, tired rhodium, a size change. A bench jeweler at our New York studio does the work and a second jeweler checks it, and nothing we fit is presented as a Christopher Designs part.

Before you ship your Christopher Designs ring

  • Check your coverage first. Ask the retailer that sold the ring what coverage applies before booking work here.
  • Read the stamp inside the band. It tells you the metal and karat to choose. If you can't read it, choose the not-sure option and the metal is tested at no charge, with the exact price set once it's confirmed.
  • Insure the full value. $100 of coverage is included each way. Full value costs 2.5% of the value above $100, one fee for both directions: $222.50 for a $9,000 ring (2.5% x $8,900), up to $10,000 per package. Over $10,000, contact us before shipping. The details are on shipping and insurance; for the safety question in full, see is it safe to mail jewelry?
  • Send copies, keep originals. Put copies of the grading report and any brand paperwork in the box, and keep the originals at home.
  • Plain box, signature both ways. Leave the ring box at home and pad the piece so it can't shift in a plain, sturdy box, with nothing on the outside naming the contents. The prepaid UPS label is waiting in your account, not your email; drop the box at any UPS location. US addresses only; coverage runs from UPS's first scan until it's signed for, and a signature is required at our studio and at your door.

JewelryRepair.com is run by Sky Jewelry at 354 Lenox Avenue (Malcolm X Blvd), New York, NY 10027: family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989. A bench jeweler does the work, a second jeweler checks it, and the repair carries a 1-year workmanship guarantee. Nothing we fit is presented as a Christopher Designs part. Questions first: (212) 597-2899.

Before you ship

  1. Pick the repair and your metal Choose the service and the metal: platinum or 18k white, yellow or rose gold. The full price and your promised-by date show before checkout. Sizing a split shank or anniversary band starts with the $19 Mail-In Evaluation.
  2. Ship with the prepaid label Your prepaid UPS label is in your account within minutes. Pack the ring in a plain, sturdy box, add full-value coverage before checkout if you need it, and drop it at any UPS location. US addresses only.
  3. Photographed, repaired, checked Your ring is photographed the day it arrives at our New York studio, center stone face-up included. A bench jeweler does the work and a second jeweler checks it.
  4. Back by UPS, signed for It's photographed again before it ships, comes back with a signature at your door, and carries a 1-year workmanship guarantee from the day it's delivered.
Independent service. JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by Christopher Designs. If your piece is covered by the brand's own warranty or service program, check with the brand first.

Questions

Can you repair a Christopher Designs Crisscut engagement ring?
Yes. JewelryRepair.com re-tips prongs, tightens halo and pavé diamonds, sets missing side diamonds and sizes plain shanks on Christopher Designs rings by mail. We set and secure Crisscut stones but don't cut or supply them. Tightening up to eight loose halo or pavé diamonds is $85 in platinum or $60 in white gold. Shipping is $30 round trip by UPS, and the work carries a 1-year workmanship guarantee.
Can a Christopher Designs ring be resized?
Usually, when the lower shank is plain. Ring Resizing at JewelryRepair.com is $565 to size a platinum ring down and $92 for 18k white gold, plus $46 for a band 4mm or wider, with sizing stock matched to the metal. Split shanks, pavé that runs down the sides and anniversary bands that need sizing start with the $19 Mail-In Evaluation, credited in full, so you see photos and options before anything is cut.
Will a jeweler swap my Crisscut diamond?
Not here, and you can check for yourself. Your ring is photographed on arrival, before any work, and again before it ships back, and both sets of photos are in your account, so you can compare the Crisscut's distinctive facet pattern. One named bench jeweler handles the ring and a second jeweler checks the work. Full-value shipping coverage is available up to $10,000.
A small diamond fell out of my Christopher Designs halo. Can you replace it?
Yes. Diamond Setting matches a missing halo or pavé diamond to its neighbors and sets it after you approve the stone and its price: setting labor for one pavé diamond is $73 in 18k white gold or $183 in platinum at JewelryRepair.com. The replacement is a diamond we match, not a Crisscut. It's worth having the rest tightened too, from $60 in white gold.
Can a chipped Crisscut diamond be repaired?
Not without changing the stone: removing a chip means re-cutting it, and the Crisscut's crisscrossed facets are Christopher Designs' patented cut, which JewelryRepair.com doesn't re-cut. Send the ring through the $19 Mail-In Evaluation, credited in full, and a jeweler photographs the chip, checks whether the setting still holds the stone safely and sends your options. For work on the stone itself, ask the store that sold the ring.
Does Christopher Designs have a warranty or repair service?
Its website publishes no warranty terms, as of November 2026; its Client Care area points to booking an appointment and to its retailer locations. Ask the store that sold the ring what coverage applies, and if the ring is covered, check with Christopher Designs first, because outside service can void it. For wear outside any coverage, JewelryRepair.com sets a missing pavé diamond for $73 in 18k white gold, plus the stone.