Mail-in jewelry repair · FOPE

FOPE bracelet and jewelry repair, by mail

FOPE Flex'it bracelets that have lost their stretch or broken a mesh link start with a $19 Mail-In Evaluation at JewelryRepair.com, credited in full toward the repair. Loose stones are tightened from $55, and a dull 18k yellow gold mesh bracelet is deep-cleaned for $78. The work is done in New York by Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989; shipping is $30 round trip by UPS.

$19Flex'it or mesh evaluation, credited in full
$7818k yellow gold mesh bracelet, Jewelry Spa
$55stone tightening, yellow gold
$30UPS round trip, prepaid label

4.9 from 187 Google reviews (as of ) · Over 50,000 repairs since 1989

Prices

Service PriceWhat's included
Mail-In Evaluation $19For a Flex'it piece that has lost its stretch, a broken spring or mesh link, a FOPE clasp or mesh end that has failed, or a FOPE ring that no longer fits: a jeweler photographs it, examines it under magnification and sends an itemized quote with photos. Credited in full toward the repair.
Jewelry Spa from $44An ultrasonic bath, steam and a hand polish, then a written inspection report from the bench, for mesh that has dulled with lotion and grime. An 18k yellow gold bracelet or necklace is $78, white gold $87.
Stone Tightening from $50Stones set into clasps and decorative elements tested for movement under 10x magnification and secured the way their settings hold them, up to eight stones per order. $55 in yellow gold, $60 in white gold.
Earring Post Repair from $30The broken post is removed flush, the pad cleaned to bare metal, and a new post soldered or laser-welded in your metal, never glued. 18k yellow gold stick posts are $43 a pair, leverbacks $73 and omegas $78; a single earring is $10 less.
Jewelry Appraisal from $105A written insurance-replacement-value appraisal with photographs: stones measured in their settings, metal tested, marks checked, construction and condition documented. Not a lab grading report.

Common repairs for FOPE pieces

18k gold mesh from Vicenza. FOPE traces back to the workshop goldsmith Umberto Cazzola opened in 1929, where he and his son made flexible gold watch straps. The family company now makes its jewelry in a factory in Vicenza, Italy, in 18k yellow, white and rose gold, with machines and hand finishing working together. Its collections, from Solo and Eka to Prima and Vendôme, are built on woven gold mesh, starting with the expandable Novecento mesh FOPE created in the early 1980s. Mesh is many small links working as one surface, and that changes what a repair can and can't do.

Loose stones. Several FOPE designs set stones into clasps and decorative elements, such as the diamond pavé clasp on some Eka Flex'it necklaces, or the princess- and baguette-cut stones set into Vendôme bracelets and necklaces. Stone Tightening tests each stone for movement under 10x magnification and secures it the way its setting holds it: $55 in yellow gold ($50 + $5) or $60 in white gold ($50 + $10), up to eight stones per order. A diamond that's already missing goes to Diamond Setting, with any stone we source quoted for your approval before it's set.

Clasps and mesh ends. Flex'it bracelets have no clasp at all. FOPE necklaces do, and they close with FOPE's own clasps, such as the ornamental and diamond pavé clasps on Eka Flex'it necklaces, fixed to the ends of the woven mesh. Our standard Clasp Replacement is priced for spring ring, lobster and box clasps on ordinary chains, so a FOPE clasp that won't close, or a mesh end that has pulled loose, starts with the Mail-In Evaluation ($19, credited in full). A jeweler checks whether the original can be saved and quotes it with photos before anything is cut or soldered.

Earrings. A bent or snapped post on a FOPE stud or drop is replaced under Earring Post Repair, soldered or laser-welded and never glued. The price depends on the fitting: a pair of 18k yellow gold stick posts is $43 ($30 + $6 + $7), leverbacks are $73 ($30 + $6 + $7 + $30) and omegas $78 ($30 + $6 + $7 + $35). In 18k white or rose gold, stick posts are $48 a pair ($30 + $11 + $7), and a single earring is $10 less.

Dull mesh. Lotion, soap and skin oils settle between mesh links and flatten the shine. The Jewelry Spa works them out with an ultrasonic bath, steam and a hand polish and comes with a written inspection report: $78 for an 18k yellow gold bracelet or necklace ($44 + $12 + $10 + $12) and $87 in white gold ($44 + $12 + $19 + $12). Every repair already includes a clean and polish, so the Spa is for when nothing is broken. If you're weighing a professional clean against home care, see what professional cleaning and polishing costs.

Flex'it: the springs inside the mesh

Flex'it is FOPE's patented design: tiny gold springs hidden between the links let a bracelet or ring stretch over the hand and then close back around the wrist or finger, with no clasp. FOPE says Eka was the first collection to launch it. FOPE says a Flex'it bracelet's diameter can expand by up to 30%, and it sells the bracelets in five sizes, XS to XL. Flex'it rings come in size ranges rather than single sizes, and FOPE says they move easily from one finger to another.

What that means for a repair. The springs are what make Flex'it work, and FOPE keeps the process for making them to itself. When a Flex'it piece has stretched and no longer closes snugly, or a spring or mesh link has broken, there's no menu repair that restores it, and we won't promise one sight unseen. Book the Mail-In Evaluation ($19, credited in full toward the repair): a jeweler photographs the piece, examines the mesh and springs under magnification and sends an itemized quote with photos. You approve all, some or none of it, and if you decline, the piece ships back with the photos and findings and nothing more to pay, because the $30 round trip covers the return.

A FOPE ring that doesn't fit. A Flex'it ring stretches within its size range instead of being cut and sized, and sizing woven gold mesh is a different job from sizing a solid band. So FOPE rings aren't booked as standard Ring Resizing here; they start with an evaluation. If you're buying a new Flex'it ring, FOPE's own advice is to pick the smaller size when you fall between two, because the fit is generous.

Making the stretch last. Slide a Flex'it bracelet over your hand rather than pulling it wide, and stretch it only as far as your hand needs. If you notice it sitting looser on the wrist than it used to, or one section stiffening, have it looked at before a link gives way.

Before you ship your FOPE piece

  • Check FOPE's warranty first. FOPE's warranty covers defects its service center finds within 24 months of the purchase date, on presentation of the completed, stamped and signed warranty certificate. It excludes damage from accidents such as impact or crushing, improper use, and repairs FOPE did not authorize. If your piece is still inside that window, contact FOPE or the dealer you bought it from first, because outside service can void that coverage.
  • Keep the certificate at home. Don't send the warranty certificate or the FOPE box. Pack the piece in a plain, sturdy box, padded so it can't shift, with nothing on the outside naming the contents.
  • Describe the problem. For Flex'it, note whether the piece no longer closes snugly, has a gap, or has a broken link, and roughly when it changed. For a necklace, say whether the fault is the clasp or the mesh.
  • Insure the full value. $100 of coverage is included each way. Full value, up to $10,000 per package, costs 2.5% of the value above $100, one fee for both directions: $97.50 for a $4,000 bracelet.
  • Signed for and photographed. UPS needs a signature at our studio and at your door, and coverage runs from UPS's first scan until it's signed for. Your piece is photographed on arrival and again before it ships back, with the photos in your account.

Declared value and claims are explained on shipping and insurance.

Before you ship

  1. Choose the repair Pick the service and choose 18k and the gold color. The full price and your promised-by date show before checkout. Flex'it springs, broken mesh, FOPE clasps and FOPE rings start with the $19 Mail-In Evaluation.
  2. Ship it insured Your prepaid UPS label is in your account within minutes. Lay a Flex'it piece flat in a small padded box so the mesh isn't folded or stretched, leave the warranty certificate at home, and drop it at any UPS location. US addresses only.
  3. Photographed, repaired, checked Your piece is photographed the day it arrives at our New York studio, recording the mesh, stones and existing wear. One bench jeweler does the work and a second jeweler checks it; anything beyond the order waits for your approval.
  4. Back by UPS, signed for It's photographed again before it ships, comes back with a signature at your door, and carries our 1-year workmanship guarantee on the work we did, separate from FOPE's own warranty.
Independent service. JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by FOPE. If your piece is covered by the brand's own warranty or service program, check with the brand first.

Questions

Can a stretched FOPE Flex'it bracelet be repaired?
A stretched FOPE Flex'it bracelet starts with the $19 Mail-In Evaluation at JewelryRepair.com, because it isn't a standard menu repair. Flex'it gets its stretch from tiny gold springs hidden between the links, made by a process FOPE keeps to itself. A jeweler examines the springs and mesh under magnification and sends photos and an itemized quote, with the $19 credited in full. Inside FOPE's 24-month warranty, contact FOPE first.
Can a broken FOPE mesh bracelet be soldered?
A broken FOPE mesh bracelet isn't booked as a menu soldering job at JewelryRepair.com; it starts with the $19 Mail-In Evaluation, credited in full. Chain Soldering is priced for ordinary chain links, while FOPE mesh is woven, and Flex'it mesh has springs hidden between the links. A jeweler examines the break under magnification and sends photos and an itemized quote, and you approve all, some or none of it.
Can a FOPE ring be resized?
A FOPE ring isn't resized as a standard sizing at JewelryRepair.com; it starts with the $19 Mail-In Evaluation, credited in full, so you know what's possible before anything is cut. Flex'it rings stretch within a size range instead of being cut and sized, and sizing woven gold mesh is a different job from sizing a solid band. If you're choosing a new Flex'it size, FOPE suggests the smaller one when you're between two.
Can the clasp on a FOPE necklace be replaced?
A failed clasp on a FOPE necklace starts with the $19 Mail-In Evaluation at JewelryRepair.com, credited in full, rather than a standard clasp swap. FOPE necklaces close with FOPE's own clasps, such as the ornamental and diamond pavé clasps on Eka Flex'it necklaces, fixed to the mesh ends. A jeweler checks whether the original can be repaired and quotes it with photos. Any new clasp would be our own, never a FOPE part.
Does an outside repair void FOPE's warranty?
An outside repair can void FOPE's warranty, which runs 24 months from the purchase date and excludes repairs FOPE did not authorize, as well as damage from accidents and improper use. A fault inside that window should go to FOPE or your dealer first, with the warranty certificate. JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by FOPE; once the warranty has ended, the choice of jeweler is yours.
How do I clean a dull FOPE mesh bracelet?
Clean a FOPE mesh bracelet at home with warm water and a little mild soap, working gently between the links with a soft brush, then rinse it and dry it fully. For grime packed between the links, the Jewelry Spa at JewelryRepair.com uses an ultrasonic bath, steam and a hand polish, with a written inspection report: $78 for an 18k yellow gold bracelet, $87 in white gold. Every repair already includes a clean and polish.