Mail-in jewelry repair · Marco Bicego

Marco Bicego jewelry repair, by mail

Marco Bicego chains, clasps and stones are repaired by mail at JewelryRepair.com, Sky Jewelry's mail-in service in New York: one break in an 18k yellow gold chain is $49, a clasp is replaced from $48, and Masai coils, or rings engraved all the way around, start with a $19 evaluation, credited in full. Shipping is $30 round trip by UPS. Sky Jewelry, family jewelers on Lenox Avenue, has done over 50,000 repairs since 1989.

$4918k yellow gold chain, one break
$19evaluation for Masai coils and fully engraved bands, credited in full
$30UPS round trip, prepaid label
1 yearworkmanship guarantee

4.9 from 187 Google reviews (as of ) · Over 50,000 repairs since 1989

Prices

Service PriceWhat's included
Chain Soldering from $30The broken link is aligned, closed with matching solder, then filed and polished flush; hollow chains are laser-welded instead of torch-soldered. One break in 18k yellow gold is $49.
Clasp Replacement from $48A spring ring, lobster or box clasp matched to your chain's gauge and weight, soldered on and action-tested, or your original clasp repaired when it can be saved. A small 18k yellow gold lobster is $72.
Jump Ring Repair from $19The small ring holding a pendant or charm is aligned under magnification and soldered closed into a seamless loop, or replaced with a heavier one. $37 in 18k yellow gold.
Stone Tightening from $50Every stone tested for movement under 10x magnification, and loose ones secured the way their setting needs, with prongs re-seated or bezels burnished tight. $55 in yellow gold.
Earring Post Repair from $30The broken post is removed flush, the pad cleaned to bare metal, and a new post soldered or laser-welded in your metal, never glued. $43 a pair for a stick post in 18k yellow gold.
Ring Resizing from $45The shank is cut and sized with sizing stock matched to the ring's karat and color, then soldered, polished and stone-checked. A plain 18k yellow gold band under 4mm wide sized down is $81.
Jewelry Appraisal from $105A written insurance-replacement-value appraisal with photographs, made from the piece in hand: stones measured in their settings, metal tested and marks verified, construction and condition documented.
Mail-In Evaluation $19A jeweler photographs the piece, examines every joint, clasp and stone under magnification, and sends an itemized quote with photos. The $19 is credited in full toward the repair.

Common repairs for Marco Bicego pieces

Hand-engraved 18k gold. Marco Bicego is an Italian house working in 18k gold with gemstones and diamonds. Its gold is hand-engraved with the bulino, a traditional engraver's tool, and the Jaipur, Lunaria and Siviglia collections are built on that engraved surface. Its Masai coil pieces are built from ultra-fine 18k gold strands spiraled around a gold core and shaped by hand. Light, finely worked gold like this wears in a few predictable places.

  • A broken link necklace or bracelet. When a plain connecting link snaps on a link piece such as Jaipur, Chain Soldering rejoins it: $49 for one break in 18k yellow gold ($30, plus $7 for yellow gold and $12 for 18k), or $56 in 18k white or rose gold. A hollow chain adds $20 because it's laser-welded rather than torch-soldered. A break inside an engraved link starts with the Mail-In Evaluation instead, because closing and finishing that seam would cut across the engraving.
  • A clasp that won't catch. Clasp Replacement fits a clasp matched to the chain's gauge and solders it on: $72 for a small 18k yellow gold lobster, $81 for a small 18k yellow gold spring ring. Choose "Repair my clasp" to keep the original if it can be saved; a replacement is our own clasp, not a Marco Bicego part.
  • A pendant or drop that came off. If the small ring joining it to the chain pulled open, Jump Ring Repair solders that ring closed so it can't open again: $37 in 18k yellow gold.
  • Loose stones. Gemstones and diamonds are tested one by one under 10x magnification and secured under Stone Tightening, from $55 in yellow gold. A stone that has shifted or fallen out is reset under Reset Loose Stone, $89 flat; if you have it, seal it in a small bag inside the box.
  • Engraved earrings. On an engraved stud or drop, the post is fixed to a small pad on the back. A bent or snapped post is replaced there under Earring Post Repair: for a stick post, $43 a pair in 18k yellow gold or $33 for one earring. Screwback, leverback and other backs cost more, and the repair page shows the total.

Bulino engraving and Masai coils: flag them before we start

Two features of Marco Bicego design change how a repair is done, and both belong in your order notes.

  • Hand-engraved surfaces. Bulino engraving is a field of fine lines cut into the gold by hand, and it's the signature surface of Lunaria, Jaipur and Siviglia. A polishing wheel works by removing a thin surface layer of metal, so run across engraved gold it softens the cuts and flattens the texture. Every repair here includes a clean and polish; on a Marco Bicego piece, note "do not polish engraved areas" when you order, and the jeweler confirms at intake how those areas will be handled, before any work. If engraving has already worn smooth in places, ask for a Hand Engraving quote (from $250, free and with no obligation): the engraver looks at whether worn areas can be re-cut to sit with the original, and nothing is cut until you accept the price.
  • Masai coil bracelets. A coil is an ultra-fine gold strand spiraled around a gold core and shaped by hand. A stretched, flattened or snapped strand is not a chain-soldering job, and there is no fixed menu price for coil work. Send coil pieces through the Mail-In Evaluation ($19, credited in full): a jeweler examines the strands under magnification and sends photos with an itemized quote. You approve all, some or none of it, and a declined piece ships back with the photos and findings and nothing more to pay.
  • Engraved ring bands. Ring Resizing cuts the band at the bottom and adds or removes metal there. On a plain lower band the seam is finished smooth; where engraving runs all the way around, the new section interrupts the pattern. Plain 18k bands are booked at the listed price: $81 to size an 18k yellow gold band under 4mm wide down, with $46 more for a band 4mm or wider. Bands engraved all the way around start with the $19 evaluation.

What we book directly, and what we assess first

If your piece is still covered by a Marco Bicego warranty, check with Marco Bicego first, because outside service can void that coverage. For a piece past it, or one that was a gift, inherited or bought secondhand, this is how JewelryRepair.com routes the usual Marco Bicego jobs.

  • Booked at the listed price: a break in a plain chain link, a clasp, a jump ring, loose stones, an earring post, and sizing a plain band. You see the full price and a promised-by date before you ship, and most repairs are back in about three weeks door to door.
  • Assessed first, for $19 credited in full: Masai coils, a break inside an engraved link, and bands engraved all the way around. You get photos and an itemized quote, and nothing is done until you approve it.
  • Quoted free: re-cutting worn bulino engraving under Hand Engraving, from $250.

Every repair carries a 1-year workmanship guarantee from the day it's delivered back. Clasps, jump rings and sizing stock are our own, matched to your gold, and never presented as Marco Bicego parts.

Before you ship your Marco Bicego piece

  • Keep a Masai coil in its shape. Lay a coil bracelet in its natural round shape, padded so nothing presses on it, in a box big enough that it doesn't have to be squeezed to fit.
  • Close every clasp. Close clasps and wrap each chain on its own, so it can't knot or rub against an engraved surface in the box.
  • Insure the full value. $100 of coverage is included each way. Full value, up to $10,000 per package, costs 2.5% of the value above $100, one fee for both directions: $72.50 for a $3,000 bracelet ($2,900 x 2.5%).
  • Plain box, signature both ways. Any sturdy small box with nothing on the outside naming the contents, and a signature at our studio and at your door. Coverage runs from UPS's first scan until the package is signed for.
  • Photographed on arrival. The piece is photographed before any work and again before it ships back, and both sets are in your account, so you can compare the engraving before and after.

The prepaid UPS label is ready in your account within minutes of ordering; drop the box at any UPS location. US addresses only. More on claims and declared value: shipping and insurance.

Before you ship

  1. Book the repair or the evaluation Pick the service, then 18k and the gold color; the full price and your promised-by date show before checkout. Masai coils and bands engraved all the way around start with the $19 Mail-In Evaluation.
  2. Pack the coil round Print the prepaid UPS label from your account, lay a coil in its natural round in a padded plain box, and drop it at any UPS location; coverage starts at the first scan. US addresses only.
  3. Engraving noted, work checked Your piece is photographed the day it arrives at our New York studio and your engraving note is confirmed. A bench jeweler does the work and a second jeweler checks it.
  4. Compare the photos It's photographed again before it ships back by UPS, signed for at your door, so you can compare the engraving in both sets. The work carries a 1-year workmanship guarantee.
Independent service. JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by Marco Bicego. If your piece is covered by the brand's own warranty or service program, check with the brand first.

Questions

Can a broken Marco Bicego Masai coil bracelet be repaired?
It can be assessed, but not booked at a fixed price. At JewelryRepair.com a broken Masai coil starts with the $19 Mail-In Evaluation, credited in full: a jeweler examines the strands under magnification and sends photos and an itemized quote before any work. Each coil is an ultra-fine 18k gold strand spiraled around a gold core and shaped by hand, so a snapped strand isn't a standard chain repair. A declined piece ships back with nothing more to pay.
How much does it cost to fix a broken Marco Bicego Jaipur link necklace?
$49 for one break in a plain 18k yellow gold link at JewelryRepair.com, or $56 in 18k white or rose gold, booked under Chain Soldering; a hollow chain adds $20 for laser welding. If the break is inside an engraved link, start with the $19 Mail-In Evaluation instead, because closing that seam would cut across the hand engraving. A clasp that won't catch is replaced from $48, and a small 18k yellow gold lobster is $72.
Will polishing damage the engraving on my Marco Bicego jewelry?
It can, so flag it before work starts. Bulino engraving is a texture of fine hand-cut lines, and a polishing wheel removes a thin layer of metal, which softens them. Every repair at JewelryRepair.com includes a clean and polish, so note 'do not polish engraved areas' when you order; the jeweler confirms at intake how those areas will be handled, before any work begins.
Can worn Marco Bicego bulino engraving be restored?
Sometimes, by re-cutting it by hand, and you see the price first. Hand Engraving at JewelryRepair.com starts from $250 and is quoted free, with no obligation: the engraver looks at whether the worn areas can be re-cut to sit with the original pattern, and nothing is cut until you accept the price. Meanwhile, on any other repair, note 'do not polish engraved areas' so intact engraving isn't softened further.
Can a Marco Bicego ring be resized?
Most plain 18k bands can. Ring Resizing at JewelryRepair.com cuts the shank, adds sizing stock matched to the karat and color, and ends with a stone check: for a band under 4mm wide, $81 to size 18k yellow gold down, or $86 to size it up one size, plus $35 for each further size up; 4mm and wider adds $46. Bands engraved all the way around start with the $19 Mail-In Evaluation.