Stones
Moissanite
Moissanite is silicon carbide, a crystal first found in meteorite rock in 1893 and now grown in labs for jewelry. It rates 9.25 on the Mohs scale, just under diamond's 10, and throws more colorful fire than diamond. It is a diamond simulant: it looks similar, but it is a different material.
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
What moissanite is
Moissanite is the mineral name for silicon carbide. Henri Moissan spotted the crystals in 1893 in rock from Arizona's Meteor Crater, mistook them for diamond, and named them as silicon carbide in 1904. In nature it turns up only in minute amounts, so jewelry moissanite is made in a lab; it went on sale as a gem in 1998.
Under the US Federal Trade Commission's jewelry guides, a diamond is nearly pure carbon with a hardness of 10, a specific gravity of about 3.52 and a refractive index of 2.42. Moissanite is a different material, so it is a diamond simulant, not a diamond. GIA groups it with cubic zirconia and glass as simulants that share nothing with diamond at the atomic level, even though they can look alike across a room.
How moissanite compares with diamond
Moissanite's figures here come from GIA's 1997 Gems & Gemology study of synthetic moissanite.
- Hardness: 9.25 on the Mohs scale against diamond's 10. Among stones commonly set in jewelry, only diamond is harder, so moissanite resists scratches in daily wear.
- Fire: a dispersion of 0.104 against diamond's 0.044, more than twice the rainbow flash.
- Refraction: refractive indices of 2.648 and 2.691 against diamond's single 2.42. Moissanite is doubly refractive, so looking into the stone you may see its back facet edges doubled; diamond never does this.
- Weight: a specific gravity of 3.22 against diamond's 3.52, so a moissanite weighs about 9% less than a diamond of the same size (3.22 ÷ 3.52 ≈ 0.91). Knowing your stone's size in millimeters is more useful than its carat weight when matching or setting it.
- Color: most moissanite looks colorless or near-colorless, though in GIA's 1997 study some stones showed a slight yellow, green or gray tint face-up.
Why it matters for repairs
Three things about moissanite change how a bench jeweler handles it.
- A diamond tester can call it a diamond. Moissanite conducts heat much like diamond, and GIA reported in 1997 that the thermal probes then on the market read it as diamond. If you know your stone is moissanite, say so when you order. If you don't know what's in a ring, a basic tester's "diamond" reading isn't proof.
- Heat changes its color for a while. Under a jeweler's torch, colorless moissanite turns yellow, then red, and returns to its own color as it cools slowly. Kept at red heat too long, or quenched in cold water, it can turn milky or crack, and once overheating has clouded the stone and dulled its fire, the only fix is a new one. Moissanite in colors such as blue, pink, purple or yellow is color-treated, and torch heat can strip that color, so those stones have to come out of the setting or be worked with a laser welder.
- Hard stones still wear their settings. Prongs on a moissanite ring wear down the same way they do on a diamond ring, and a loose, very hard stone rubbing in its setting grinds at the metal holding it.
For cleaning, moissanite can be treated like diamond: warm soapy water and a soft toothbrush at home. Ultrasonic and steam cleaning won't hurt the stone, but they can shake an already loose stone further out of its setting, so check the prongs first.
Signs a moissanite ring needs attention
- It snags on sweaters or hair: a prong tip has worn flat or lifted.
- A faint rattle when you tap it near your ear, or the stone turns under a fingernail: it's loose.
- The stone sits crooked or lower than it used to: it has shifted in its seat and needs resetting, not just tightening.
- A dull coating, blue or brown spots, or an oil-slick sheen after a repair somewhere else: that's usually residue from bench work, which a longer, heated cleaning can remove. A stone that is milky all the way through and has lost its fire is heat-damaged and needs replacing. Not sure which you have? The Mail-In Evaluation ($19, credited in full) gets you photos and an itemized quote first.
Moissanite vs cubic zirconia
Cubic zirconia (CZ) is the other common diamond simulant, and the two get mixed up in jewelry boxes. CZ is grown from zirconium oxide and rates 8.5 on the Mohs scale, against moissanite's 9.25. GIA describes CZ as having slightly more fire but less brilliance than diamond, while moissanite has more than twice diamond's fire and slightly more brilliance. Over time the gap widens: GIA notes CZ can yellow with age, and as the softer stone it picks up scratches sooner.
What it costs here
Prices at JewelryRepair.com for moissanite work, in sterling silver (gold and platinum add a metal charge shown before checkout):
- Setting a stone you supply: Gemstone Replacement & Setting is $75 for one center stone of 0.5 to 1 carat in a prong setting and $23 for one side stone; a bezel adds $17. The same center stone is $96 in 14K white gold and $256 in platinum. Lost the stone? Choose "Source them for me" and the replacement is quoted separately for your approval before setting. For a center stone over 1 carat, ask for a free quote first.
- A loose stone: Stone Tightening from $50, up to eight stones per order, or Reset Loose Stone at $89 when a stone has shifted or come out.
- Worn prongs: Prong Re-Tipping from $29 for one to four prongs and $57 in 14K white gold; platinum adds $195, and 5 to 9 prongs add $45. It's laser-welded, which puts the heat at the prong tip rather than on the stone.
Shipping is $30 round trip per order by UPS. Tell us the stone is moissanite when you order, so the bench knows it isn't diamond before any heat goes near it. The work is done at the New York studio of Sky Jewelry, with over 50,000 repairs since 1989, and carries a 1-year workmanship guarantee.
Prices at a glance
| Service | Price | What's included |
|---|---|---|
| Gemstone Replacement & Setting | from $75 for one 0.5–1 ct center stone from $23 for one side stone |
Setting labor for a moissanite you supply, booked through this gemstone service rather than Diamond Setting: the seat is trued, the stone leveled and secured in its prong, pavé, channel, bezel or flush setting. Silver prices; gold and platinum add a metal charge. Over 1 carat, ask for a free quote first. |
| Stone Tightening | from $50 | A moissanite that turns or rattles, tested under 10x magnification and secured, up to eight stones per order: $55 in yellow gold, $60 in white gold, $85 in platinum. |
| Reset Loose Stone | $89 | For a moissanite that has tilted, sunk or come out of its seat: the seat is re-cut and the stone set level. If the stone is lost, the job becomes replacement plus setting. |
| Prong Re-Tipping | from $29 | New metal laser-welded onto up to four worn prong tips, with the heat kept at the tip rather than on the stone: $53 in 14K yellow gold, $57 in 14K white or rose, $65 in 18K white; platinum adds $195. |
Prices come from the live repair pages. Shipping is $30 round trip per order.
Related questions
Questions
Is moissanite a real diamond?
Will a diamond tester say moissanite is a diamond?
Can a moissanite ring be resized?
Can moissanite go in an ultrasonic cleaner?
Does moissanite get cloudy?
How much does it cost to set or replace a moissanite?
See also
All glossary terms · Repair questions · How online jewelry repair works